You may also like
Bolts 5/8-11 x 2-1/2 HXBT SS (Box 25)
Additional Notes
- Other sizes and quantities available by request
Features
- The molybdenumcontent gives this type of stainless even greater corrosion resistance than 18-8 as well as superior strength at high temperatures.
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Division:
- Electrical H1
- Fastener Head Height:
- 25/64 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.922 - 0.938 in.
- Fastener Height:
- 0.378 - 0.403
- Fastener Length:
- 2/1/02
- Fastener Width:
- 1.051 - 1.083
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Hardness:
- Rockwell B95-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_Dom_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- EA
- Outside Diameter:
- 0.6170 - 0.6250 IN
- Pack Type:
- Box
- Product Group:
- Fasteners
- Product Height:
- 3.25 in
- Product Length:
- 7.25 in
- Product Weight:
- 6101 g
- Product Width:
- 171.45 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 100000 - 150000 psi minimum
- Thread Per Inch:
- 11
- Wrenching Height:
- 0.269
- Yield Strength:
- 65000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 316 Stainless Steel
Metallics SBH941 – Frequently Asked Questions
1) Can I use the Metallics SBH941 on a federally funded job with Buy American requirements?
No. The SBH941 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. If your contract carries domestic-sourcing language, this bolt will not satisfy it.
2) What wrench or socket size fits the hex head on the Metallics SBH941?
Across the flats the hex head measures 0.922 to 0.938 inch, so a 15/16 inch socket or wrench is the size to bring. Head height is 25/64 inch, with a wrenching height of 0.269 inch, so there is enough bearing surface for an impact socket in a tight pocket.
3) How strong is a 316 stainless hex bolt like the SBH941 compared to a grade 5 steel bolt?
Tensile runs 100,000 to 150,000 psi minimum with a 65,000 psi minimum yield, and hardness is Rockwell B95 to C32. That puts it in the range of a medium-strength carbon bolt, but it is not a substitute for Grade 8 structural work. Pick it when corrosion resistance drives the choice; pick a heat-treated alloy bolt when clamp load does.
4) Does the Metallics SBH941 bolt come in a box, and is there a minimum order quantity?
The SBH941 ships as a box of 25 bolts, and the order minimum is 50 each, so plan on two boxes as the smallest buy. Other sizes and quantities in the SBHC and JSBHC hex bolt series are available by request if 5/8-11 x 2-1/2 is not the length you need.
5) How much usable grip length does a 5/8-11 x 2-1/2 hex bolt give me?
The 2-1/2 inch figure is the shank length measured under the head, not overall, so the 25/64 inch head sits on top of that. Stack your material thickness plus washers and nut inside the 2-1/2 inches; for thicker assemblies ask for a longer length out of the same SBHC and JSBHC series.
6) What jobs is the Metallics SBH941 stainless hex bolt meant for?
It is sold for the electrical, plumbing, and heating and air conditioning trades, so think strut and channel hardware, pipe clamps and hangers, equipment feet, and rooftop or mechanical-room mounting where a plated carbon bolt would rust out. The 316 stainless makes it a fit for humid, coastal, or wash-down locations.
How fast can I get the Metallics SBH941 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics SBH941 come with a warranty?
Absolutely. The Metallics SBH941 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics SBH941?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics SBH941 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.