You may also like
Metallics G5HTB80 Bolts 5/8-11 X 6 G5 Hx Tap Blt St-zn (Box 50)
Model: MET-G5HTB80
Bolts 5/8-11 X 6 G5 Hx Tap Blt St-zn (Box 50)
Additional Notes
Other sizes and quantities available by request
Features
Used to mount motor to machinery. Also popular in automotive and truck...
Metallics
$59.94
$13.50
Bolts 5/8-11 X 3 G5 Hx Tap Blt St-zn (Box 50)
Features
- A cap screw made from medium carbon steel and heat-treated
- Used to mount motor to machinery. Also popular in automotive and truck repair
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Height:
- 25/64 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.922 - 0.938 in.
- Fastener Height:
- 0.378 - 0.403
- Fastener Length:
- 3
- Fastener Width:
- 1.051 - 1.083
- Grade:
- 5
- Hardness:
- Rockwell C19-30
- Language Code:
- EN
- Material Standard:
- AISI 1008 - 1026
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Tap_Bolt_St-Zn_and_18-8_SS.pdf
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.6170 - 0.6250 IN
- Pack Type:
- Box
- Product Group:
- Fasteners
- Product Height:
- 6 in
- Product Length:
- 7.25 in
- Product Weight:
- 14.77 lbs
- Product Width:
- 6.25 in
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 105000 psi minimum
- Thread Direction:
- Right Hand
- Thread Per Inch:
- 11
- Thread Standard:
- ASME B18.2.1-2012
- Wrenching Height:
- 0.269
- Yield Strength:
- 105000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Tap Bolt
- Type2:
- Hexagonal Tap Bolt
- Series:
- G5HTB and JG5HTB
- Product Finish:
- Zinc
- Product Details:
- Hexagonal Tap Bolt
- Product Material:
- Steel
Metallics G5HTB68 – Frequently Asked Questions
1) Is the Metallics G5HTB68 tap bolt threaded all the way to the head?
Yes. A hex tap bolt is fully threaded along its length, unlike a hex cap screw with a plain shank, so the G5HTB68 carries 5/8-11 right-hand thread over the full 3 inch length. That matters when you are threading into a tapped hole in a motor base or bracket and need engagement right up at the bearing surface.
2) What hole size do I need to drill and tap for these 5/8-11 bolts?
The bolt body runs 0.6170 to 0.6250 inch outside diameter on a 5/8-11 UNC thread, so a tapped hole takes a 17/32 inch tap drill followed by a 5/8-11 tap. For a through hole with a nut, a 11/16 inch clearance hole is the usual call. Thread conforms to ASME B18.2.1-2012.
3) Will the zinc plated finish hold up outdoors?
The finish is zinc plating over a steel bolt, which is built for indoor and sheltered use, light moisture, and general machinery mounting. For continuous wet exposure, coastal air, or washdown environments, go to an 18-8 stainless hex tap bolt in the same 5/8-11 x 3 size instead, since zinc plating sacrifices itself and will eventually rust through.
4) How many bolts come in a box of Metallics G5HTB68?
Fifty bolts per box, and 50 is the minimum order quantity. Metallics notes other sizes and quantities can be had on request, so if a job needs a different length in the same 5/8-11 thread it can be asked for.
5) Does the Metallics G5HTB68 tap bolt meet Buy American or ARRA requirements on a federal job?
Metallics lists the G5HTB68 as compliant for both ARRA and Buy American purposes. Country of origin on the bolt is China, so if your contract requires domestic melt and manufacture rather than the ARRA compliance flag, confirm which standard the specification is written to before you submit it.
6) What steel is the Metallics Grade 5 hex tap bolt made from?
Material conforms to AISI 1008-1026 carbon steel, heat treated to reach Grade 5 properties. That is the standard feedstock range for Grade 5 fasteners and it is why the bolt comes out at Rockwell C19-30 rather than the harder Grade 8 range.
7) How much does a box of 50 of these 5/8-11 x 3 tap bolts weigh?
A box runs 14.77 lbs, which is worth factoring if you are staging several boxes on a lift or carrying them up to a mechanical room.
How fast can I get the Metallics G5HTB68 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics G5HTB68 come with a warranty?
Absolutely. The Metallics G5HTB68 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics G5HTB68?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics G5HTB68 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.