Boshart 08SVA Angle Supply Stop Valve, No-Lead

Boshart 08SVA-05PFNL Angle Supply Valve, 1/2" Push-Fit x 3/8" Compression, No-Lead

The Boshart 08SVA-05PFNL is a no-lead 1/4 turn angle supply stop valve built for behind-the-wall and under-fixture rough-in work. It transitions from a 1/2" push-fit inlet to a 3/8" compression outlet, giving installers a fast, tool-free connection on the supply side and a standard compression fitting on the appliance or fixture side. Supply stops like this one serve as the low-pressure shut-off point at dishwashers, ice makers, faucets, and similar appliances, and this configuration is built to meet that exact application. The quarter-turn handle allows a plumber to isolate the fixture quickly without needing to cycle a valve stem multiple times, which speeds up service calls and reduces wear over repeated shut-off cycles.

Key Features

• Trade Size: 1/2" push-fit inlet by 3/8" compression outlet, sized for common appliance and fixture supply runs.
• Push-Fit Connection: The 1/2" inlet uses a push-fit design for a quick, tool-free connection to the supply line, reducing installation time versus solvent or threaded joints.
• Compression Outlet: The 3/8" compression connection on the outlet side gives a secure, field-serviceable joint to the appliance or fixture supply tube.
• 1/4 Turn Operation: A quarter-turn angle valve design allows the installer to open or shut off water supply quickly with a simple 90-degree handle rotation.
• Angle Configuration: The angle body pattern is suited for installations where the supply line and the outlet run in different directions, common at fixture stub-outs.
• No-Lead Construction: Manufactured to a no-lead specification for use on potable water supply lines.

Certifications & Compliance

• No-Lead

Technical Specifications

• Country of Origin: China
• Packaging: 20 ea
• Inlet Connection: 1/2" Push-Fit
• Outlet Connection: 3/8" Compression
• Handle Type: 1/4 Turn
• Body Pattern: Angle

Typical Applications

• Appliance Supply Shut-Off (Dishwashers, Ice Makers)
• Fixture Stub-Out Isolation Valves
• Residential and Commercial Rough-In Plumbing
• Renovation and Service Replacement Work
• New Construction Supply Line Installation

Why Boshart?

Boshart builds this angle supply valve with a no-lead construction suited for potable water supply applications, pairing a tool-free 1/2" push-fit inlet with a reliable 3/8" compression outlet for a fast, dependable fixture shut-off point. The 1/4 turn operation gives installers and service techs a quick, low-effort way to isolate water supply at the appliance, making it a practical choice for both new installations and service replacements. Packaged 20 ea for stocking distributors and contractors who need this configuration on hand for regular rough-in and repair work.