Boshart 08SVT Quarter-Turn Tee...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$10.12
Boshart 08SVT Quarter-Turn Tee Supply Stop Valve, No-Lead

Boshart 08SVT Quarter-Turn Tee Supply Stop Valve, No-Lead

(No reviews yet) Write a Review

Model: 08SVT-05PF02CPN

In Stock (leaves warehouse same day if ordered before 3pm ET)

$10.12
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Boshart 08SVT-05PFNL 1/2" Push-Fit x 3/8" Compression Quarter-Turn Tee Supply Valve, No-Lead

The Boshart 08SVT-05PFNL is a No-Lead quarter-turn tee supply valve built for rough-in and appliance shut-off applications where a plumber needs a reliable, low-pressure isolation point without soldering or threading. This supply stop connects with a 1/2" push-fit inlet on one end and a 3/8" compression outlet on the other, in a tee configuration that lets the installer branch off an existing line while maintaining independent shut-off control. Supply stops like this one are typically installed behind the wall or under a fixture, at the point where a water line feeds an appliance such as a dishwasher, ice maker, or toilet fill valve, and the quarter-turn handle gives a fast, positive open/closed indication that's easy to verify on a service call. Because it's manufactured to No-Lead standards, it's suited for potable water supply lines where lead-free components are required.

Key Features

  • Trade Size: 1/2" push-fit inlet x 3/8" compression outlet, sized for standard appliance and fixture branch connections.
  • Push-Fit Connection: The 1/2" end uses a push-fit connection for a fast, tool-free installation onto compatible tubing without soldering, clamping, or threading.
  • Compression Outlet: The 3/8" compression end accepts standard compression fittings for connecting supply tubing to the fixture or appliance.
  • Tee Configuration: The tee body allows a branch connection off a main supply run, useful where a single line needs to feed an additional fixture or appliance.
  • 1/4 Turn Operation: A quarter-turn handle provides quick, positive shut-off with a clear visual indication of open versus closed position, speeding up service and troubleshooting.
  • No-Lead Construction: Manufactured to No-Lead specifications for use on potable water supply lines.

Technical Specifications

  • Connection: 1/2" Push-Fit x 3/8" Compression
  • Configuration: Tee, 1/4 Turn
  • Material Compliance: No-Lead
  • Country of Origin: China
  • Packaging: 10 ea per pack

Typical Applications

  • Appliance Water Supply Shut-Off (Dishwashers, Ice Makers)
  • Toilet and Fixture Supply Line Branching
  • Residential and Commercial Rough-In Plumbing
  • Low-Pressure Supply Line Isolation Behind Walls or Under Fixtures
  • Renovation and Retrofit Supply Line Upgrades

Why Boshart?

Boshart supply stops are built to give plumbers and contractors a dependable, code-conscious option for isolating water supply lines at the appliance or fixture level. With a No-Lead push-fit and compression connection paired with a simple quarter-turn shut-off, the 08SVT-05PFNL is designed for straightforward installation and fast field service. Choose Boshart for rough-in supply components that hold up to the demands of everyday plumbing work.

"

Manufacturer Resources

Product Specs

Department:
Plumbing
list_batch:
BOS-20260923
Product Subgroup:
Fittings and Valves
Standards:
No-Lead
Product Type:
Supply Stop
Product Group:
Fitting
Product Weight:
0.36 lb

Boshart 08SVT-05PF02CPN – Frequently Asked Questions

1) What size connections does the Boshart 08SVT tee supply stop have?
The inlet is 1/2 inch push-fit, and the outlet is compression in one of two sizes: 3/8 inch (MPN 08SVT-05PFNL) or 1/4 inch (MPN 08SVT-05PF02CPN). The 3/8 inch outlet is the usual size for toilet and faucet supply risers; the 1/4 inch outlet is what an ice maker or humidifier line typically uses.
2) Do I need to solder or thread the 08SVT push-fit supply stop?
No. The 1/2 inch end is a push-fit connection that goes on tool-free, with no soldering, clamping, or threading. The other end is a standard compression outlet, so you tighten a compression nut and ferrule onto the supply tubing there. That makes it workable on a live-ish repair or a tight under-fixture space where a torch isn't practical.
3) Is this Boshart supply valve lead-free for potable water?
Yes, the 08SVT is built to No-Lead specification for potable water supply lines, which is what most jurisdictions require on any valve feeding a drinking water fixture.
4) Which outlet size do I order for a dishwasher or ice maker feed?
Match the outlet to the tubing the appliance uses. Ice makers and small humidifier lines commonly run 1/4 inch tubing, so the 08SVT-05PF02CPN with the 1/4 inch compression outlet is the fit. Dishwashers and toilet fill valves generally run 3/8 inch, which is the 08SVT-05PFNL. Both share the same 1/2 inch push-fit inlet, so the supply side of the decision doesn't change.
5) What is the point of a tee supply stop instead of a straight or angle stop?
The tee body lets you branch off a main supply run while keeping an independent shut-off on the branch. That's the situation where you're feeding a second fixture or appliance (a dishwasher or ice maker off an existing line) without cutting in a separate tee fitting and stop. If you only need one fixture fed from a stub out of the wall, a plain straight or angle stop is the simpler part.
6) Why choose a quarter-turn stop over a multi-turn one for rental units?
A quarter-turn handle gives a positive open or closed position you can read at a glance, which matters on a service call or a unit turn where you're verifying a dozen shut-offs quickly. Multi-turn stops give no visual indication and their washers tend to be what fails after years of sitting untouched. The 08SVT is a 1/4 turn design.
7) Can I use the 08SVT tee stop behind a wall or in a rough-in?
Yes, it's intended for rough-in and appliance shut-off work, including low-pressure supply isolation behind walls or under fixtures. If you bury it, keep in mind any shut-off needs to stay accessible for service, so plan an access panel or place it in a cabinet.
8) How many Boshart 08SVT supply stops come in a pack?
They're packaged 10 each per pack, which suits rough-in work or stocking a service van rather than a single replacement.
How fast can I get the Boshart 08SVT-05PF02CPN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Boshart 08SVT-05PF02CPN come with a warranty?
Absolutely. The Boshart 08SVT-05PF02CPN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Boshart 08SVT-05PF02CPN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Boshart 08SVT-05PF02CPN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!