You may also like
Boshart BPF-T No-Lead Brass Push-Fit Reducing Tee
The Boshart BPF-T is a No-Lead brass push-fit reducing tee built for potable water and hydronic heating rough-in where a fast, tool-free connection is needed. This family of reducing tees is available in three trade size configurations — 1" x 1" x 1", 3/4" x 1/2" x 3/4", and 3/4" x 3/4" x 3/4" — and joins copper, CPVC, and PEX pipe in any combination without soldering, flux, clamps, unions, or glue. That makes it a practical choice for behind-the-wall and underground installations, including locations with or without access panels. Because it requires no torch or curing time, it is especially useful for wet, hazardous, or hard-to-drain repair situations where traditional soldering is difficult or unsafe.
Key Features
- Trade Size Range: Available in 1" x 1" x 1", 3/4" x 1/2" x 3/4", and 3/4" x 3/4" x 3/4" reducing tee configurations, compatible with tube sizes 3/8" (0.5" O.D.), 3/4" (0.875" O.D.), and 1" (1.125" O.D.).
- Durable Construction: No-Lead brass body suitable for potable water and hydronic heating system applications.
- Push-Fit Connection: Tool-free installation with no soldering, flux, clamps, unions, or glue required, speeding up rough-in and repair work.
- Multi-Material Compatibility: Connects copper, CPVC, and PEX pipe in any combination, giving plumbers flexibility when transitioning between pipe materials on a single run.
- Rotatable After Assembly: Fittings can be rotated after connection, allowing for easier alignment and installation in tight spaces such as wall cavities and underground trenches.
- Application Versatility: Approved for use both underground and behind walls, with or without access panels, in new residential and commercial construction.
Technical Specifications
- Country of Origin: China
- Packaging: 12 ea
- Prop 65 Warning: Lead
Typical Applications
- Potable Water Distribution Rough-In
- Hydronic Heating System Installations
- New Residential and Commercial Construction
- Underground and Behind-Wall Pipe Runs
- Wet, Hazardous, or Hard-to-Drain Repair Situations
- Transitions Between Copper, CPVC, and PEX Piping
Why Boshart?
Boshart's BPF-T push-fit reducing tee family gives plumbers and contractors a No-Lead brass fitting that installs quickly without soldering, flux, or specialty tools, reducing labor time on both new construction and repair jobs. The ability to connect copper, CPVC, and PEX pipe interchangeably, combined with a rotatable joint for tight-space installations, makes this fitting a dependable option for rough-in plumbing behind walls or underground, across all three available size configurations. Choose Boshart for push-fit fittings engineered for reliable, code-relevant potable water and hydronic heating connections.
Manufacturer Resources
Product Specs
- list_batch:
- BOS-20260923
- Product Type:
- Tee
- Connection Type:
- Push-Fit
- Standards:
- No-Lead
- Department:
- Plumbing
- Product Subgroup:
- Fittings and Valves
- Product Material:
- Brass
- Product Group:
- Fitting
Boshart BPF-T070507NL – Frequently Asked Questions
1) Can I use a Boshart BPF-T push-fit tee to join copper to PEX and CPVC on the same run?
Yes. The BPF-T no-lead brass push-fit tee accepts copper, CPVC and PEX in any combination, so one tee can take a copper main, a CPVC branch and a PEX run-out without soldering, flux, clamps, unions or glue. That is the main reason plumbers reach for it on repair work where the existing pipe material changes partway down a run.
2) What size configurations does the Boshart BPF-T reducing tee come in?
Three: 1" x 1" x 1" (MPN BPF-T101007NL), 3/4" x 1/2" x 3/4" (BPF-T070507NL) and 3/4" x 3/4" x 3/4" (BPF-T070705NL). If you are branching a 3/4 inch main down to a 1/2 inch fixture drop, the 3/4 x 1/2 x 3/4 is the one to order; the other two are straight-through tees on a single trade size.
3) Can a push-fit brass tee be buried underground or closed up behind drywall without an access panel?
Yes. The Boshart BPF-T is approved for underground use and for behind-wall runs with or without an access panel, which is why it gets used for rough-in in new residential and commercial construction as well as buried repairs.
4) Is the Boshart BPF-T tee safe for potable water?
It is a no-lead brass body intended for potable water distribution and hydronic heating. Note the product also carries a Prop 65 lead warning, which is standard labeling on brass plumbing goods in California.
5) What tube outside diameters do these push-fit tees accept?
The BPF-T family fits 3/8 inch tube at 0.5 inch O.D., 3/4 inch tube at 0.875 inch O.D. and 1 inch tube at 1.125 inch O.D. Push-fit joints seal on the O.D., so measure the tube outside diameter rather than going by the label on the pipe before you pick the size.
6) Can I rotate the tee after I push the pipe in to line up a branch?
Yes, the fitting rotates after assembly. That matters in a wall cavity or a trench where you cannot spin the pipe itself, you set the depth first and then swing the branch to where you need it.
7) Do I need any special tools to install a Boshart BPF-T tee?
No torch, no flux, no solder, no glue and no clamping tool. It is a tool-free push connection, and with no curing time it works in wet, hazardous or hard-to-drain spots where soldering is not practical. A tube cutter and a deburr are all you want on hand for a clean square end.
8) How are Boshart BPF-T tees packaged for a multi-family or MRO stock order?
They are packed 12 each, which suits keeping a bin of 3/4 inch and 1 inch tees on the truck or in a maintenance crib for repair calls.
How fast can I get the Boshart BPF-T070507NL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Boshart BPF-T070507NL come with a warranty?
Absolutely. The Boshart BPF-T070507NL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Boshart BPF-T070507NL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Boshart BPF-T070507NL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.