Boshart HT No-Lead Bronze Hydrant Tee, INS x INS x MPT

Boshart HT No-Lead Bronze Hydrant Tee, INS x INS x MPT

The Boshart HT No-Lead Bronze Hydrant Tee is a bronze hydrant fitting used to connect a water supply line to an underground yard hydrant. Available in a range of sizes from 3/4" to 1", this tee is configured INS x INS x MPT (inlet x inlet x male pipe thread), giving plumbers and installers a compact, code-aware branch fitting purpose-built for hydrant rough-in work below grade across the sizes in this family. Manufactured to no-lead standards, it is intended for potable water supply connections where lead-free bronze construction is required, and it is built to the durability expectations of underground utility service regardless of size selected. The tee's tapped and extra-long tapped ports are 1/4" on every size in the range, giving installers a dedicated auxiliary connection point on the fitting body for drainage, sensing, or accessory hookups common to yard hydrant installations. This is a rough-in, behind-the-scenes plumbing component — it is installed underground at the hydrant riser and water line junction, not a visible or decorative fixture, so specification and installation should be handled by a qualified plumber or contractor familiar with buried hydrant assemblies. Whether the project calls for the 3/4" or 1" version, the fitting shares the same bronze construction, no-lead compliance, and INS x INS x MPT configuration.

Key Features

• Configuration: INS x INS x MPT connection pattern, purpose-built for tying a water line into an underground hydrant.
• Size Range: Available in 3/4" and 1" sizes to match hydrant riser and water line requirements.
• Durable Construction: Bronze body for corrosion resistance in buried, wet-service applications.
• No-Lead: Manufactured to no-lead specification for use in potable water supply lines.
• Tapped Port: Tapped and extra-long tapped connections are 1/4", providing an auxiliary access point on the fitting across every size in the family.
• Underground Hydrant Application: Designed specifically to connect the water line to a hydrant located below grade.

Technical Specifications

• Country of Origin: Taiwan
• Prop 65 Warning: Lead
• Packaging: 10 ea
• Available Sizes: 3/4", 1"

Typical Applications

• Underground Yard Hydrant Water Line Connections
• Residential and Commercial Buried Water Service Rough-In
• Hydrant Riser Assembly and Branch Fitting Installations
• Potable Water Supply Line Tie-Ins
• New Construction and Underground Utility Repair Work

Why Boshart?

Boshart builds this hydrant tee from bronze to no-lead specification, giving contractors a corrosion-resistant, potable-water-appropriate fitting for buried hydrant connections in both 3/4" and 1" sizes. The INS x INS x MPT configuration with its 1/4" tapped port is engineered specifically for the demands of underground hydrant rough-in work, making it a practical choice for plumbers standardizing on reliable, purpose-built bronze fittings for below-grade water service installations regardless of which size the job requires.