Ives

60/61 BASE DOOR STOPS Simple to install - only a screwdriver required;Packed disassembled for quick installation;Available in three sizes to accommodate varying areas of installation and doortrim...

60/61 BASE DOOR STOPSSimple to install - only a screwdriver required;Packed disassembled for quick installation;Available in three sizes to accommodate varying areas of installation and door trim...

Ives 5BB1HW 5 KNUCKLE, BALL BEARING, HEAVY WEIGHT FULL MORTISE HINGERecommended for heavier weight doors (>150 lbs);Recommended for high frequency usage (400 cycles per day);Made with four ball...

5BB1 5 KNUCKLE BALL BEARING FULL MORTISE HINGE Recommended for medium weight doors (<150 lbs);Recommended for medium frequency usage (<400 cycles per day);Made with two ball bearing...

3CB1 BRASS/STAINLESS 3 KNUCKLE, CONCEALED BEARING FULL MORTISE HINGERecommended for medium weight doors (<150 lbs); Recommended for medium frequency usage (<400 cycles per day); Made with two...

262 FLUSH BOLT - 6" SQUARE ENDAn exceptionally smooth working flush bolt with sharp, crisp lines;Double action spring design provides automatic holding of brass bolt in projected or retracted...

Ives WS406 407CCV WALL STOP Constructed in sturdy yet economical wrought base of brass or stainless steel construction; Feature concealed tamper-proof mounting; Shipped factory preassembled...

Ives WS401/402CCV (CONCAVE) WALL BUMPERS Constructed in heavy - Duty Cast Brass; Special retainer ring makes rubber tamper resistant; Grey rubber bumper; WS401/402CCV ���������...

FS450 FLOOR STOP & MANUAL DOOR HOLDER - DRYWALL/WOOD Manual type floor holder ideal for interior or exterior use;Accommodates door undercut up to 2-1/2";Replaceable black non-marring rubber...

FS455 4" KICK DOWN HOLDERUnits provide simple hold and release, activated with a touch of the foot;Stainless steel spring;Replaceable black non-marring rubber shoes have corrugated bottoms to provide...

60/61 BASE DOOR STOPSSimple to install - only a screwdriver required;Packed disassembled for quick installation;Available in three sizes to accommodate varying areas of installation and door trim...

70 HINGE PIN DOOR STOPSEconomical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not...

70 HINGE PIN DOOR STOPSEconomical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable; ...

60/61 BASE DOOR STOPS Simple to install - only a screwdriver required;Packed disassembled for quick installation;Available in three sizes to accommodate varying areas of installation and doortrim...

FS448 FLOOR STOP - DRYWALL AND WOODIdeal for interior or exterior use;Accommodates door undercut up to 2-1/2";Replaceable black non-marring rubber tip;FS448 is packed with fasteners for drywall/wood...

FS17 DOME STOPOne piece dome stop for use with thresholds;Heavy-duty cast dome stops constructed of brass;Units are packed with fasteners sufficient for mounting in all types of floor construction,...

Ives DP2 DUST PROOF STRIKE - ROUND FACE PLATE This floor and/or threshold Ives dust proof strike DP2 with 1 5/8" x 3 1/2" face plate is designed for use with the bottom bolt of all flush bolts The...

COR7G/COR9G GRAVITY COORDINATORSWhen active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to...

IVES DP1 DUST PROOF STRIKE - ROUND FACE PLATE Designed for use with the bottom bolt of all flush bolts; Spring-loaded plunger returns to floor or threshold level anytime flush bolt is retracted,...

FB358 TOP OR BOTTOM BOLTSWhen the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive...