Bryant 2828G Clock Hanger Rece...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$83.60
Bryant 2828G Clock Hanger Receptacle, NM5-15R Configuration

Bryant 2828G Clock Hanger Receptacle, NM5-15R Configuration

(No reviews yet) Write a Review

Model: 2828G

In Stock (leaves warehouse same day if ordered before 3pm ET)

$83.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bryant 2828G Clock Hanger Receptacle, NM5-15R Configuration

The Bryant 2828G Clock Hanger Receptacle is a specialty wiring device designed to provide a concealed power connection point for wall-mounted clocks in commercial, institutional, and educational facilities. Configured to the NM5-15R specification, this clock hanger receptacle combines a recessed mounting hook with an integrated electrical outlet, allowing a clock to hang directly over the unit while its power cord stays hidden from view. Built by Bryant, a recognized name in commercial-grade wiring devices, the 2828G model number identifies this device for straightforward specification, ordering, and replacement on any electrical supply order. Because the mounting hook and receptacle are combined into a single device, electricians can complete a wall clock circuit without adding separate hardware, saving time on both new installations and retrofit projects.

Key Features

  • Clock Hanger Configuration: Model 2828G pairs a recessed mounting hook with a wired receptacle so a wall clock hangs directly over its power connection point.
  • NM5-15R Configuration: Built to the NM5-15R receptacle configuration for compatibility with standard clock hanger mounting hardware.
  • Concealed Cord Routing: The hanger and outlet combination routes and conceals the clock's power cord behind the clock face for a clean, finished wall appearance.
  • Bryant Model 2828G: Identified by Bryant's 2828G catalog number for simple specification, quoting, and reordering.
  • Purpose-Built Application: Designed specifically for wall clock installations rather than general-purpose outlet use, simplifying device selection for this application.
  • Single-Device Installation: Combining the hanger and receptacle in one unit reduces the parts an electrician needs to source and install for a wall clock outlet.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Schools and Educational Facilities
  • Offices and Commercial Buildings
  • Hospitals and Healthcare Facilities
  • Hallways, Corridors, and Common Areas
  • Renovation and New Construction Wall Clock Installations
  • Facility Maintenance Replacement of Existing Clock Receptacles

Why Bryant?

Bryant is a long-established manufacturer of commercial and institutional wiring devices trusted by electrical contractors and facility managers for dependable, easy-to-specify hardware. The 2828G clock hanger receptacle reflects that same focus on purpose-built, code-conscious design, giving facilities a straightforward way to add a clean, concealed power connection wherever a wall clock is installed. Choosing the Bryant 2828G means specifying a device built for exactly this application, backed by Bryant's standing in the electrical trade and its long history of supplying wiring devices for commercial and institutional projects.

Manufacturer Resources

Bryant Full Line Catalog

Product Specs

list_batch:
BRY-20260909
Product Type:
Recessed Receptacle
Configuration:
NM5-15R
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets

Bryant 2828G – Frequently Asked Questions

1) What is a clock hanger receptacle and why would I use one instead of a regular outlet for a wall clock?
A clock hanger receptacle combines a recessed mounting hook with an electrical outlet in one device, so the clock hangs directly over its own power connection and the cord stays hidden behind the clock face. The Bryant 2828G is built for that job specifically. With a standard duplex outlet you would need a separate hook or bracket plus a visible cord drop; the 2828G lets an electrician finish a wall clock circuit with a single device.
2) I'm replacing an existing clock outlet in a school corridor. Is the 2828G a direct replacement?
If what is in the wall now is an NM5-15R clock hanger device, the 2828G matches that configuration and is a straight swap in the same application. Facility replacement of existing clock receptacles is one of the uses this device is built for. If the existing device is a general-purpose receptacle with a separate hook, you are changing device type, not just brand.
3) Is the NM5-15R configuration on the Bryant 2828G the same as a standard 5-15R?
No. The Bryant 2828G is built to the NM5-15R configuration, a non-standard clock hanger pattern intended to mate with clock hanger mounting hardware, not with a general-purpose cord cap. A standard 5-15R device is a different thing: the Eaton 5262W duplex receptacle is listed as 15A 125V, 5-15R. If the clock uses an NM5-15R hanger plug, the 2828G is the matching device; if it uses a normal parallel-blade plug, a 5-15R such as the 5262W is the correct receptacle.
4) If a wall outlet is needed for general 15A 125V use rather than hanging a clock, what should be specified instead of the Bryant 2828G?
The Bryant 2828G is a clock hanger receptacle in the NM5-15R configuration, combining a recessed mounting hook with an outlet so a clock hangs over its own power connection. For an ordinary wall outlet, the Eaton Arrow Hart heavy-duty industrial duplex receptacle 5262W is a 15A 125V 5-15R device in industrial specification grade, and the Eaton 816W is a commercial specification grade single receptacle rated 15A. Both accept standard straight-blade cord caps; neither provides the hanger hook the 2828G carries.
5) Can I use the Bryant 2828G as a general-purpose outlet for other equipment?
No. The 2828G is a purpose-built clock hanger device, not a general-purpose outlet, and its NM5-15R face is not the standard 5-15R most cords plug into. For ordinary 15A 125V duty use a spec-grade duplex such as the Eaton Arrow Hart 5262W, a 15A 5-15R industrial specification grade device.
6) What part number do I put on the purchase order for a Bryant clock hanger receptacle?
Order Bryant catalog number 2828G. That single model number covers the device; there are no finish or amperage variations to specify.
7) Our clocks run on 277V lighting circuits. Is a clock hanger receptacle the right device?
The 2828G is an NM5-15R clock hanger device, a 125V-class configuration, so it is not the part for a 277V clock feed. For 277V work ZenSupply carries the Pass & Seymour 5762 duplex self-grounding receptacle rated 15A 277V, though that is a standard duplex and not a clock hanger.
8) Do I need extra hardware or a separate hook to hang the clock?
No separate hook is needed. The mounting hook is recessed into the device itself and wired to the receptacle, which is the point of the design, so an electrician installs one device rather than sourcing a hanger bracket plus an outlet.
9) Can the Bryant 2828G clock hanger receptacle be used on a 277V clock circuit?
The Bryant 2828G is an NM5-15R clock hanger receptacle intended for the 15A clock circuits typical in schools, offices, and hospitals. Where the wall device sits on a 277V branch instead, the Pass & Seymour 5762 is a duplex self-grounding receptacle rated 15A 277V in specification grade. The 5762 is a conventional duplex outlet without a clock hanger hook, so it powers the clock by cord and plug rather than supporting its weight.
10) What receptacle should be used instead of the Bryant 2828G where the device has to be explosionproof or factory sealed?
The Bryant 2828G is a clock hanger receptacle for commercial, institutional, and educational interiors and is not a hazardous-location device. For classified areas, the Appleton FSQC series interlocked explosionproof receptacle and the Appleton U-Line ECS factory-sealed 15 and 20 amp 3-pole plug and receptacle set are built for that duty. Both are industrial enclosure-style devices rather than flush wall clock outlets.
11) For a healthcare or data area clock outlet needing isolated ground or timed control, what devices cover that instead of the Bryant 2828G?
The Bryant 2828G is a purpose-built NM5-15R clock hanger receptacle with no isolated-ground or switching feature. Where an isolated ground is specified, the Pass & Seymour IG5362-I is a heavy-duty spec-grade isolated ground duplex receptacle rated 20A 125V. Where the outlet must shut off on a schedule, the Pass & Seymour PLT26351 is a heavy duty spec grade plug load timer receptacle rated 20A 125V. Both are standard duplex wall devices, so the clock would hang on separate hardware.
12) Where does a clock hanger receptacle like this typically get specified?
Schools, offices, hospitals, and corridors and common areas, on both new construction and renovation wall clock installations. It is standard institutional spec wherever a wall clock needs power without a visible cord.
13) Is a locking receptacle like the Pass & Seymour Turnlok 3330 an alternative to the Bryant 2828G for securing a clock connection?
They solve different problems. The Bryant 2828G holds the clock itself on a recessed hook while its cord stays concealed behind the clock face. The Pass & Seymour Turnlok 3330 is a 30A non-NEMA single receptacle, and the Eaton 7379 is an industrial locking receptacle rated 50A, 600V/250V AC/DC; those twist-lock devices retain a mating plug under vibration or strain but provide no mounting support for a clock and are rated well above a clock circuit.
14) Would a single decorator receptacle work in place of the Bryant 2828G behind a wall clock?
A single receptacle powers the clock but does not hang it. The Bryant 2828G combines the mounting hook and the outlet in one device, so no separate hanger hardware is needed. The Eaton 6450W is a heavy-duty industrial specification grade decorator single receptacle accepting #14-10 AWG conductors, and the Eaton 816W is a commercial specification grade single receptacle rated 15A; either supplies the circuit, with clock support provided by other means.
How fast can I get the Bryant 2828G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant 2828G come with a warranty?
Absolutely. The Bryant 2828G is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant 2828G?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bryant 2828G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!