You may also like
Bryant 8666TSP Watertight Hospital-Grade Plug, N6-15P
The Bryant 8666TSP is a watertight, hospital-grade attachment plug engineered in the N6-15P configuration for demanding healthcare and wet-location environments. Its watertight housing is built to resist moisture intrusion, washdown exposure, and the general wear that comes with heavy daily use in clinical and industrial settings. The hospital-grade rating means the 8666TSP is built to meet the elevated reliability and durability standards required in hospitals and other medical facilities, where dependable power connections are critical. As a heavy-duty cord-cap connector, the 8666TSP provides a secure, dependable termination point for equipment that requires the N6-15P blade configuration, helping ensure a consistent, code-appropriate connection wherever it is installed.
Key Features
- Watertight Construction: a sealed plug housing resists moisture intrusion, keeping internal contacts protected in wet, damp, or washdown-prone areas.
- Hospital-Grade Rating: engineered to hospital-grade standards, the 8666TSP is built for the demanding reliability requirements of healthcare and clinical facility environments.
- N6-15P Configuration: the plug's N6-15P blade configuration is designed to mate correctly and securely with compatible receptacles for a proper electrical connection.
- Heavy-Duty Attachment Plug: a rugged plug body is designed to hold up to the demands of frequent connect/disconnect cycles in cord-connector applications.
- Secure Cord Termination: provides a dependable, code-appropriate termination point for cord sets used with compatible equipment.
- Bryant 8666TSP Model: part of Bryant's lineup of watertight, hospital-grade plugs built for professional electrical use.
Certifications & Compliance
- Hospital Grade construction, rated for use in hospital and healthcare facility settings.
- Watertight, wet-location rated housing suitable for damp and washdown-prone areas.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Hospital and healthcare facility equipment cords requiring hospital-grade reliability.
- Wet-location and washdown-area installations where a watertight seal is required.
- Medical equipment power connections in clinical and patient-care settings.
- Commercial and industrial cord-connector applications where a heavy-duty plug is needed.
- Facility maintenance and equipment replacement projects specifying the N6-15P configuration.
Why Bryant?
Bryant is a trusted name in professional-grade electrical devices, and the 8666TSP reflects that standard with watertight, hospital-grade construction built for demanding environments. Facilities that require dependable performance under moisture exposure and heavy use turn to devices like the 8666TSP for a secure, code-appropriate connection. Electricians, contractors, and facility managers rely on Bryant devices for consistent, professional-grade performance in healthcare, commercial, and industrial settings alike.
Manufacturer Resources
Bryant Full Line Catalog
Product Specs
- list_batch:
- BRY-20260909
- Product Type:
- Straight Blade Plug
- Configuration:
- N6-15P
- Grade:
- Hospital Grade
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Plugs & Connectors
Bryant 8666TSP – Frequently Asked Questions
1) What receptacle does the Bryant 8666TSP plug mate with?
The Bryant 8666TSP is built in the NEMA N6-15P configuration, so it mates with a 6-15R receptacle or connector body. That is a 2-pole, 3-wire grounding 250V 15A pattern, so it will not go into a standard 5-15R 125V outlet. If your equipment cord runs on 120V, you need a 5-15P instead.
2) Is the Bryant 8666TSP plug OK for a washdown area?
Yes. The 8666TSP has a watertight, wet-location rated housing that resists moisture intrusion, which is the point of the sealed body: it keeps the internal contacts protected in damp and washdown-prone areas. That is what separates it from a standard dry-location cord cap.
3) Does the 8666TSP meet a hospital-grade requirement for patient-care equipment cords?
It is a Hospital Grade device, rated for use in hospital and healthcare facility settings, so it satisfies a spec calling for hospital-grade cord caps. It is the watertight version, which is what you want when the same cord also sees moisture or washdown, for example kitchen, lab, or sterile processing equipment.
4) I need a hospital-grade plug but my equipment is 125 volt, not 250. What should I use instead?
The 8666TSP is a 6-15P pattern, which is a 250V configuration, so it is the wrong plug for a 125V cord. For 125V hospital-grade work, look at the Leviton 8215-CAT tamper-resistant hospital-grade plug in NEMA 5-15P, or the Leviton 8315-CT in NEMA 5-20P if the cord is on a 20A circuit. Both are hospital grade; neither is described as watertight, so they are for dry locations.
5) What other hospital-grade plugs are available if the equipment cord uses a 125-volt configuration instead of N6-15P?
The Bryant 8666TSP is a hospital-grade plug built in the NEMA N6-15P configuration, which is the 250-volt 2-pole 3-wire blade pattern. For 125-volt cords, two hospital-grade alternatives are the Leviton 8215-CAT, a tamper-resistant hospital-grade plug in NEMA 5-15P, and the Leviton 8315-CT, a tamper-resistant hospital-grade plug in NEMA 5-20P. Match the plug to the receptacle configuration on the wall, since 5-15P, 5-20P and N6-15P blades are not interchangeable.
6) Is an industrial-grade 250-volt plug an acceptable substitute for the Bryant 8666TSP in a patient-care area?
The Bryant 8666TSP carries a hospital-grade rating along with watertight construction, which is what healthcare specifications call for in patient-care spaces. The Leviton 5666-C is a 3-wire 2-pole polarized straight blade plug rated 250-volt 1-phase with an industrial grade designation, so it covers the same voltage class but not the hospital-grade designation. If the specification on the job calls out hospital grade, the 8666TSP is the one that meets it; the 5666-C suits general industrial 250-volt cord work.
7) Is the Bryant 8666TSP a cord-mounted plug or a panel device?
It is a cord cap, an attachment plug you wire onto the end of a flexible cord set. The body is built for repeated connect and disconnect cycles, which is what you get on portable equipment. If you need the mating half on the cord instead, you want a 6-15R connector body rather than this plug.
8) Will the 8666TSP work on a 20-amp cord?
No. The N6-15P blade pattern is a 15A configuration, so it should terminate a 15A cord on a 15A rated circuit; a 6-20P has a different blade geometry and will not interchange. For a 20A straight-blade cord cap on 125V, the Pass and Seymour EHU angled plug is rated 20A 125V, though it is not a hospital-grade or watertight device.
9) What plug should be used instead of the Bryant 8666TSP when a straight-entry plug will not clear the wall behind equipment?
The Bryant 8666TSP is a straight-body watertight attachment plug, so it projects straight out from the receptacle. Where clearance is tight, an angled body is the alternative: the Pass and Seymour PS5366-SSAN is an angled straight blade plug rated 20A 125V in the EHU series, and the Leviton 275-E is a commercial grade 4-wire 3-pole angle plug. Both change the cord exit direction rather than the electrical rating, so confirm the configuration matches your receptacle before substituting.
10) Which plugs look like alternatives to the Bryant 8666TSP but are not watertight hospital-grade devices?
Several straight blade cord plugs sit next to the Bryant 8666TSP but are built to different standards. The Eaton Arrow Hart AH5266 Ultra Grip plug is rated 15A 125V and carries an industrial specification grade designation. The Pass and Seymour PS5965Y is a MaxGrip M3 nylon cord plug in yellow. The Leviton 275-E is a commercial grade device. None of those carry the hospital-grade rating the 8666TSP does, and the 8666TSP's watertight housing is what makes it the choice for washdown and damp locations.
11) Does the Bryant 8666TSP offer tamper resistance like the Leviton hospital-grade plugs?
The Bryant 8666TSP is specified as a watertight hospital-grade plug in the N6-15P configuration, with the sealed housing being its distinguishing feature for wet and washdown areas. The Leviton 8215-CAT and 8315-CT are hospital-grade plugs described as tamper-resistant, in NEMA 5-15P and 5-20P respectively, and both are supplied in packs of 100. If a behavioral-health or pediatric spec calls for tamper resistance on a 125-volt cord, those are the ones written for it; for a 250-volt N6-15P cord needing moisture protection, the 8666TSP is the fit.
12) Do I order the Bryant 8666TSP in a finish or color option?
There is one configuration to order: model 8666TSP, the watertight hospital-grade N6-15P plug. No color, finish, or amperage choices to make on it. If you want a color-coded cord cap for equipment identification, something like the Pass and Seymour PS5965Y MaxGrip M3 nylon plug in yellow covers that, though it is not a hospital-grade watertight device.
13) For a facility buying plugs in bulk to standardize cord sets, how does the Bryant 8666TSP compare to case-quantity hospital-grade options?
The Bryant 8666TSP is ordered by its single model, MPN 8666TSP, as a watertight hospital-grade N6-15P plug. Where the standardization program covers 125-volt cords, the Leviton 8215-CAT (NEMA 5-15P) and 8315-CT (NEMA 5-20P) are hospital-grade plugs supplied in packs of 100, which suits stocking one configuration across many carts and beds. A mixed facility often stocks both: the case-pack 125-volt plugs for general equipment and the 8666TSP for 250-volt or wet-location cords.
How fast can I get the Bryant 8666TSP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant 8666TSP come with a warranty?
Absolutely. The Bryant 8666TSP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant 8666TSP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bryant 8666TSP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.