Bryant BRY5362CR 125V Receptac...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$56.97
Bryant BRY5362CR 125V Receptacle, 15A-20A Rated

Bryant BRY5362CR 125V Receptacle, 15A-20A Rated

(No reviews yet) Write a Review

Model: BRY5662IG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$56.97
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bryant BRY5362CR 125V Receptacle, 15A-20A Rated

The Bryant BRY5362CR is a 125V-rated electrical receptacle engineered for dependable power connections in residential and commercial wiring systems, available in 15A and 20A Motor FLA ratings to match the specific electrical demand of the circuit it serves. Bryant is a well-established name in electrical wiring devices, and this receptacle is built to deliver safe, consistent electrical service at the point of use. Its 125V rating makes it suitable for standard general-purpose circuits commonly found throughout homes, offices, and light commercial facilities, while the 15A-20A Motor FLA range lets electricians and contractors match the receptacle to the connected motor load on the circuit. Electricians, contractors, and facility maintenance teams specify Bryant devices for straightforward installation and dependable long-term performance in everyday electrical systems, whether the project is new construction, a renovation, or a routine wiring device replacement.

Key Features

  • Voltage Rating: 125V, suitable for standard general-purpose electrical circuits found in typical residential and commercial wiring.
  • Motor FLA Rating: Available in 15A and 20A ratings, allowing the receptacle to be matched to the full-load amperage of the connected circuit and motor.
  • Bryant Build Quality: Manufactured by Bryant, a long-recognized supplier of electrical wiring devices for residential and commercial construction projects.
  • Straightforward Installation: Configured as a standard receptacle for quick installation in new construction, renovation, or replacement wiring projects, helping keep labor time down on the job.
  • Everyday Versatility: Suited to a wide range of common 125V electrical connection needs in homes, offices, and light commercial spaces.
  • Professional-Grade Reliability: Built to perform consistently under the everyday demands of active electrical circuits over the life of the installation.
  • Standard Wiring Device Footprint: Sized and configured to fit standard outlet boxes and wallplates typically used in North American electrical systems.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Residential Electrical Wiring
  • Commercial Building Electrical Systems
  • General-Purpose Power Outlets
  • New Construction and Remodel Projects
  • Facility Maintenance and Replacement Wiring
  • Office and Light Commercial Buildouts

Why Bryant?

Bryant has long been a trusted name in electrical wiring devices, valued by professionals for reliable, code-compliant performance on the job. Specifying a Bryant BRY5362CR receptacle means choosing a device built for the everyday demands of residential and commercial electrical systems, available in 15A and 20A Motor FLA ratings to fit the job at hand, from routine outlet replacements to full building wiring projects. For electricians, contractors, and facility managers, the Bryant BRY5362CR offers a dependable option for standard 125V electrical connections, backed by a manufacturer with a long track record in the electrical wiring device category. When a project calls for a straightforward, dependable 125V receptacle in either the 15A or 20A Motor FLA rating, the Bryant BRY5362CR is built to meet that everyday requirement.

Product Specs

list_batch:
BRY-20260909
Product Type:
Duplex Receptacle
Voltage Rating:
125V
Amperage Rating:
15A-20A
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets

Bryant BRY5662IG – Frequently Asked Questions

1) What is the difference between the Bryant 5362CR and the 5662IG receptacle?
They are the two amperage choices in the same Bryant 125V receptacle family. Order BRY5362CR for the 20A rating and BRY5662IG for the 15A rating. Both are 125V devices, so the decision comes down to the branch circuit and breaker they are landing on: a 20A circuit gets the 20A device, a 15A circuit the 15A device.
2) I have a 277V lighting circuit, can I use a 125V Bryant receptacle on it?
No. This device is rated 125V only. A 277V circuit needs a 277V-rated receptacle, for example the Pass & Seymour 5762 duplex self-grounding spec-grade receptacle, rated 15A 277V. Putting a 125V device on 277V is a hazard, not a downrate.
3) Can I use this receptacle for a motor load, and how do I pick between the 15A and 20A version?
Yes, it carries a 15A-20A amperage rating, so you match the device to the full-load amperage of the connected motor and the circuit feeding it. If the motor FLA and circuit are 20A, take BRY5362CR; at 15A, take BRY5662IG. Do not use the 15A device to serve a 20A circuit.
4) Can the Bryant BRY5362CR be used in a hazardous or wet industrial location?
It is a standard 125V wiring device for general-purpose residential and commercial circuits, not a classified-location fitting. For hazardous areas use a device built for it, such as the Appleton FSQC series interlocked explosionproof receptacle, or the Appleton U-Line ECS factory-sealed 15 and 20 amp 3-pole plug and receptacle set, which covers the same 15 and 20 amp range in a factory-sealed assembly. Confirm the area classification on the drawings before choosing between them.
5) What is the closest equivalent to the Bryant BRY5362CR 20A 125V isolated ground receptacle from another manufacturer?
The Pass & Seymour IG5362-I is the nearest match. It is a heavy-duty spec-grade isolated ground duplex receptacle rated 20A 125V, the same amperage and voltage the Bryant BRY5362CR carries in its 20A configuration. Both are duplex devices intended for isolated-ground branch circuits where the ground terminal is kept separate from the yoke, so the substitution is a direct one on a standard outlet box. Verify the required device color on the job, since isolated-ground devices are commonly specified in a particular color for identification.
6) If I only need a standard 15A 125V duplex receptacle and not an isolated ground device, what should I use instead?
The Eaton Arrow Hart heavy-duty industrial duplex receptacle in 15A 125V, NEMA 5-15R, gray, covers a straight general-purpose 15A 125V duplex opening without the isolated-ground construction. The Bryant BRY5362CR family is rated 125V and offered in 15A and 20A, so the Eaton matches the 15A end on voltage and amperage while being a conventional grounded device rather than one with an isolated ground terminal. Use the Eaton where the circuit does not call out an isolated ground on the drawing.
7) Will a Pass & Seymour 5762 work in place of the Bryant BRY5362CR?
No. The Pass & Seymour 5762 is a duplex self-grounding specification receptacle rated 15A 277V. The Bryant BRY5362CR is a 125V device, so the two are on different voltage systems and the 277V unit belongs on a 277V branch circuit, not a standard 125V general-purpose one. The blade configuration differs accordingly and a 125V cord cap will not mate with it.
8) Can I use a Bryant BRY5362CR receptacle on a 120V household circuit?
Yes. The receptacle is rated 125V, which is the standard rating for the nominal 120V general-purpose branch circuits used in North American homes, offices and light commercial space. A 125V device rating is the normal spec on a 120V circuit, not a mismatch.
9) Will the Bryant BRY5362CR fit a standard outlet box and wallplate?
It uses the standard North American wiring device footprint, so it mounts in standard outlet boxes and takes standard wallplates. No special box or plate is needed for a straight replacement of an existing device.
10) I need an isolated ground receptacle for IT equipment. Is there an option?
For an isolated ground 20A 125V duplex, the Pass & Seymour IG5362-I is the spec-grade IG device we carry. Use an IG receptacle only where the branch circuit actually has a separate insulated equipment grounding conductor run back to the panel ground; otherwise a standard 20A 125V device is the right part.
11) Is this receptacle heavy enough for an industrial plant floor?
The Bryant 125V receptacle is built for residential, commercial and light commercial circuits, offices, buildouts and maintenance replacements. Where you want a device explicitly graded for hard industrial duty, the Eaton Arrow Hart 5262W is an industrial specification grade 15A 125V duplex in the 5-15R configuration, and the Eaton 816W is a commercial specification grade 15A single receptacle.
12) I need a locking receptacle for the same equipment run - what are my options?
Locking devices are a separate family from the straight-blade Bryant BRY5362CR. The Pass & Seymour Turnlok 30A non-NEMA single receptacle and the Eaton 7379 industrial locking receptacle rated 50A, 600V/250V AC/DC in black both use twist-lock engagement and higher current ratings than the 15A and 20A the Bryant is offered in. Match the cord cap on the equipment to the locking configuration before ordering, since these are not interchangeable with a 125V straight-blade outlet.
13) Is there a 20A 125V receptacle that will shut the outlet off on a schedule for energy code compliance?
The Pass & Seymour PLT26351 is a heavy duty spec grade plug load timer receptacle rated 20A 125V, matching the 20A 125V rating of the Bryant BRY5362CR while adding integral timed control of the outlet. Use it where a controlled-receptacle requirement appears on the plans; use the Bryant where an always-on isolated ground or general-purpose outlet is what the circuit calls for.
14) Is there a single-receptacle alternative rather than a duplex at 15A?
Two single-outlet options exist. The Eaton 816W is a commercial specification grade single receptacle rated 15A, and the Eaton 6450W is a heavy-duty industrial specification grade decorator single receptacle accepting #14-10 AWG conductors. Both give one outlet per yoke instead of the two the Bryant BRY5362CR duplex provides, which is the usual choice when a dedicated piece of equipment should be the only load on the device.
How fast can I get the Bryant BRY5662IG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant BRY5662IG come with a warranty?
Absolutely. The Bryant BRY5662IG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant BRY5662IG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bryant BRY5662IG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!