You may also like
Bryant CBRS 125V Tamper-Resistant Duplex Receptacle, 15A-20A
Model: BRY-CBRS
Bryant CBRS 125V Tamper-Resistant Duplex Receptacle, 15A-20AThe Bryant CBRS Tamper-Resistant Duplex Receptacle is a 125V wiring device engineered to provide a secure, code-conscious power connection...
Bryant
Starting at
$14.93
Bryant Weather Resistant Duplex Receptacle, 20A 125V
The Bryant Weather Resistant Duplex Receptacle delivers dependable power connection points for general-purpose branch circuits in commercial and residential electrical systems. Rated 20A at 125V, this duplex receptacle features a weather-resistant design along with back and side wire terminals for flexible, efficient installation by electrical professionals. This family is available in Black, Brown, and Ivory finishes to coordinate with a wide range of wall plates and interior or exterior finishes. Electricians and contractors can rely on this receptacle for quick rough-in and consistent long-term operation in both everyday interior settings and locations exposed to moisture and the elements.
Key Features
- Electrical Rating: Rated 20A at 125V, suitable for standard general-purpose branch circuit applications in commercial and residential wiring.
- Weather Resistant Design: Engineered to withstand exposure to moisture, humidity, and outdoor conditions, adding durability beyond a standard interior-only receptacle.
- Duplex Configuration: Two integrated outlets allow simultaneous connection of multiple devices, cords, or equipment from a single receptacle location.
- Back and Side Wire Terminals: Supports both back-wire (push-in) and side-wire (screw terminal) connections, giving installers the flexibility to choose the fastest or most secure wiring method for the job.
- Available Finishes: Offered in Black, Brown, and Ivory to coordinate with a wide range of wall plates, trim kits, and interior finishes in commercial and residential spaces.
- Commercial-Grade Construction: Built by Bryant for consistent, reliable performance across repeated plug insertions and long-term use in demanding electrical systems.
- Standard Duplex Footprint: Sized to install into standard electrical boxes and accept standard duplex wall plates for straightforward retrofit or new-construction installation.
Technical Specifications
- Amperage Rating: 20A
Typical Applications
- Commercial and Residential Electrical Installations
- Outdoor and Weather-Exposed Receptacle Locations
- Duplex Outlet Replacement and Retrofits
- Renovation and New Construction Wiring Projects
- General-Purpose 20A Branch Circuits
- Covered Porches, Patios, and Other Exposed Areas Requiring Weather Resistant Devices
Why Bryant?
Bryant engineers its weather resistant receptacles for durability and code-compliant performance, combining rugged construction with flexible back and side wire terminals that speed installation without sacrificing reliability. The 20A, 125V rating gives electrical contractors a versatile receptacle for general-purpose circuits, while the weather-resistant construction extends its usefulness to areas exposed to moisture where a standard receptacle would fall short. Available in Black, Brown, and Ivory, this Bryant duplex receptacle gives professionals a dependable option that stands up to demanding environments and repeated daily use on commercial and residential jobs alike.
Manufacturer Resources
Bryant Full Line Catalog
Product Specs
- Product Type:
- Duplex Receptacle
- Amperage Rating:
- 20A
- Voltage Rating:
- 125V
- Connection Type:
- Back and Side Wire
- Configuration:
- Duplex
- list_batch:
- TOPAZ-20260727
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Receptacles & Outlets
Bryant CBRS15 – Frequently Asked Questions
1) Can a Bryant weather resistant duplex receptacle be used outdoors on a patio or exterior wall?
That is what the weather resistant construction is for. The Bryant 20A 125V duplex receptacle is built to take moisture, humidity and outdoor exposure, so it suits covered porches, patios and other damp or wet exposed locations where a standard interior-only device would fail early. It still needs to sit in an appropriate outdoor box with a cover; the device itself is the weather resistant part, not the enclosure.
2) Will this drop into an existing outlet box and take a standard duplex wall plate?
Yes. It uses the standard duplex footprint, so it installs in standard electrical boxes and accepts standard duplex cover plates. That makes it a straight swap for a failed or worn duplex outlet as well as a new-construction device.
3) Is a weather resistant receptacle the same thing as a GFCI receptacle?
No, and they are not interchangeable. The Bryant device is a weather resistant duplex, meaning the body and components tolerate moisture and outdoor exposure; it has no ground-fault protection of its own. Outdoor and other GFCI-required locations still need ground-fault protection, either a GFCI device or a GFCI breaker upstream. Weather resistance and GFCI protection are two separate requirements that often apply to the same outlet.
4) What is the closest 20A 125V duplex alternative to the Bryant weather resistant receptacle?
The Pass & Seymour IG5362-I is the nearest match on electrical rating and configuration: it is a heavy-duty spec-grade isolated ground duplex receptacle rated 20A 125V, the same 20A, 125V duplex arrangement as the Bryant weather resistant device. The difference is the isolated ground construction on the IG5362-I, which separates the equipment ground path for sensitive electronics, where the Bryant device is a standard weather resistant duplex with back and side wire terminals.
5) Is the Bryant weather resistant receptacle suitable for a hazardous or explosionproof location?
No. Weather resistant construction addresses moisture, humidity, and outdoor exposure, not classified hazardous atmospheres. For those areas the Appleton FSQC Series interlocked explosionproof receptacle, or the Appleton U-Line ECS factory-sealed 15 and 20 amp plug and receptacle set in a 3-pole arrangement, are the device types built for the duty. The Bryant device is intended for general-purpose 20A branch circuits including covered porches, patios, and other exposed areas.
6) I only need 15A on a 125V circuit - what should I use instead of the Bryant 20A weather resistant duplex?
For a 15A branch circuit, the Eaton Arrow Hart 5262W is a heavy-duty industrial duplex receptacle rated 15A 125V with a 5-15R face, in gray. The Bryant weather resistant duplex is rated 20A at 125V, so it is the choice where the circuit and the load call for 20A. Note the Eaton is an industrial specification grade device rather than a weather resistant one.
7) Will a 20A Bryant duplex receptacle work on a 15 amp branch circuit?
A 20A 125V device is rated at or above a 15A circuit, so it is electrically fine on a 15A branch, but the mismatch usually goes the other way in practice: use the 20A receptacle where the circuit and conductors are actually rated 20A. On a 20A circuit a 15A receptacle is not an acceptable single-outlet substitute. The Bryant device is rated 20A at 125V for general-purpose branch circuits.
8) Does this Bryant receptacle take push-in back wiring or screw terminals?
Both. The Bryant 20A duplex accepts back wire (push-in) and side wire (screw terminal) connections, so a crew doing volume rough-in can back-wire and still use the binding screws where a torqued screw termination is required or specified.
9) What colors does the Bryant weather resistant duplex receptacle come in, and what are the part numbers?
Three colors: Brown (CBRS15), Ivory (CBRS20I) and Black (CBRS20W). Order by those part numbers when you need the finish to match existing devices and plates across a building.
10) I have 277V lighting circuits in the building. Can I use this receptacle on those?
No. The Bryant duplex is rated 125V only and must stay on 120/125V branch circuits. For a 277V outlet the Pass and Seymour 5762 is a spec grade duplex self-grounding receptacle rated 15A 277V.
11) If one device per box is enough, is there a single receptacle instead of the Bryant duplex?
Yes. The Eaton 816W is a commercial specification grade single receptacle rated 15A, and the Eaton 6450W is a heavy-duty industrial specification grade decorator single receptacle accepting #14-10 AWG conductors. Both give one outlet per opening, where the Bryant device is a duplex configuration with two outlets at the same location.
12) Will a locking receptacle work in place of the Bryant 20A 125V duplex?
No - a twist-lock device takes a matching locking plug, not the straight-blade cord caps the Bryant 20A 125V duplex accepts. If the application genuinely calls for locking, the Pass & Seymour Turnlok 3330 is a 30A non-NEMA single receptacle, and the Eaton 7379 is an industrial locking receptacle rated 50A, 600V/250V AC/DC, in black, listed as extra heavy duty. Neither substitutes for a 125V duplex outlet serving general-purpose plug loads.
13) What other 20A 125V duplex options are there if I need the outlet to switch off automatically?
For plug-load control rather than weather resistance, the Pass and Seymour PLT26351 is a heavy duty spec grade plug load timer receptacle at 20A 125V. The Bryant weather resistant duplex has no timer or control function; it is a straight always-on outlet.
How fast can I get the Bryant CBRS15 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant CBRS15 come with a warranty?
Absolutely. The Bryant CBRS15 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant CBRS15?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bryant CBRS15 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.