You may also like
Bryant P26GY 1-Gang Rectangular Wallplate, Gray
The Bryant P26GY wallplate is a 1-Gang cover plate featuring a single rectangular opening, finished in a neutral gray designed to blend with a wide range of wall colors and interior finishes. Sized to fit one standard electrical wiring device box, this wallplate is intended to conceal wiring connections and give switches or receptacles that use a rectangular, Decora-style cutout a clean, finished appearance. As part of the Bryant wiring device lineup, the P26GY is built to be used alongside Bryant switches, receptacles, and other rectangular-opening devices, helping installers maintain a consistent look across a job. It is well suited to residential, commercial, and light-industrial wiring projects where a simple, single-gang cover is required.
Key Features
- 1-Gang Configuration: Sized to fit a single standard electrical wiring device box, making it suitable for single-switch or single-receptacle locations.
- Rectangular Opening: Features one rectangular cutout designed to accommodate Decora-style rocker switches, GFCI and AFCI receptacles, and other wiring devices that use a rectangular opening.
- Gray Finish: A neutral gray color that coordinates with a wide range of wall colors, trim, and surrounding wiring devices for a clean, unobtrusive look.
- Low-Profile Design: Sits flush against the wall surface to fully conceal the device opening, mounting screws, and box edges once installed.
- Bryant Device Compatibility: Designed to be used with Bryant wiring devices that share the same rectangular opening configuration, supporting a matched device-and-plate installation.
- Single-Piece Cover: A one-piece wallplate construction intended for straightforward installation over a single wiring device opening.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Residential Switch and Receptacle Cover Applications
- Commercial and Light-Industrial Wiring Device Installations
- Single-Gang Electrical Box Finishing
- New Construction Wiring Projects
- Renovation and Wiring Device Replacement Work
- Decora-Style Rectangular Device Coordination
Why Bryant?
Bryant is a recognized name in electrical wiring devices, and the P26GY wallplate is designed to complement Bryant's line of rectangular-opening switches and receptacles. Selecting a matched Bryant wallplate and wiring device combination helps installers maintain consistent fit, alignment, and finished appearance across a project. For contractors and electricians standardizing on Bryant wiring devices, the P26GY offers a straightforward, single-gang cover option finished in gray to suit a broad range of installations.
Manufacturer Resources
Bryant Full Line Catalog
Product Specs
- list_batch:
- BRY-20260909
- Product Type:
- Decorator Wallplate
- Configuration:
- 1-Gang
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Wallplates
- Product Color:
- Gray
Bryant P26GY – Frequently Asked Questions
1) Will the Bryant P26GY wallplate fit a Decora style rocker switch or a GFCI receptacle?
Yes. The P26GY is a single-gang plate with one rectangular cutout, which is the opening Decora style rockers, GFCI and AFCI receptacles use. It will not cover a standard toggle switch or a duplex receptacle, those need a toggle or duplex cutout plate instead.
2) What covers a toggle switch instead of a Decora rocker, if the Bryant P26GY has the wrong opening?
The Bryant P26GY has a single rectangular opening sized for Decora-style rocker switches and rectangular-face receptacles, so it will not fit a standard toggle. For a toggle switch opening, the Pass & Seymour SPJ Series junior-jumbo thermoset wall plate is cut for a toggle, and the Mulberry 41020 is a 1-gang toggle switch plate from the 4102 Series in gas burner red for equipment identification.
3) I need the same style plate but for two or three gangs - what are the options?
The Bryant P26GY is a 1-gang configuration. For wider boxes, the Pass & Seymour TP703LA is a 2-gang nylon wall plate in light almond from the TradeMaster line, the Pass & Seymour TP126-LA is a Trademaster two-gang combination nylon plate, and the Eaton 7729V-SP is a decorator triple-gang cover.
4) What color is the Bryant P26GY, and can I match it across a whole building?
Gray. It is a neutral gray meant to sit alongside Bryant switches and receptacles in the same color, so if you are standardizing a floor or a building on gray devices, ordering the plates under the same model number keeps the finish consistent across openings.
5) What is the exact part number to order for the Bryant gray 1-gang Decora wallplate?
Order Bryant P26GY. That is the manufacturer part number for the gray single-gang rectangular-opening plate, and it is the only configuration sold under it, so there is no color or gang suffix to specify.
6) Do I need to cover a blank opening or a phone jack? Is the P26GY the right plate?
No. The P26GY has an open rectangular cutout, so it will not blank off an unused box. For a blank cover, the Pass & Seymour WPB Series brushed aluminum blank plate does that job. For voice or data, the Eaton 35324W plate carries a 4-conductor Type 625B4 modular jack and the Eaton 3533-4W is a surface mount RJ11/RJ14 telephone jack plate.
7) What should I use if the box has no device in it at all?
The Bryant P26GY has a rectangular device cutout, so it will leave an open hole over an empty box. A blank plate is the right part there - the Pass & Seymour WPB Series blank wallplate in brushed aluminum closes off the opening with no cutout.
8) Is there a metal wallplate alternative for higher-abuse areas?
The Bryant P26GY is a one-piece plate in gray. Where a steel plate is preferred, the Mulberry 76432 and 76532 are cold rolled steel 2-gang combination wallplates in white, from the 764 and 765 Series respectively, and the Mulberry 76103 is a steel Princess size 3-gang plate with three duplex receptacle openings. Those are multi-gang, so confirm the box configuration before substituting.
9) I need a combination plate with a switch and a receptacle opening - does the Bryant P26GY do that?
No. The P26GY is single-gang with one rectangular opening, so it covers one device only. Combination plates that pair two different openings include the Cooper Wiring Devices 2138WBOX, a 21 Series thermoset combination wallplate in white, and the Pass & Seymour TP126-LA, a Trademaster two-gang combination nylon plate.
10) Will an oversized plate cover a rough cut-in better than the Bryant P26GY?
The P26GY is a standard-size one-piece plate that sits flush and conceals the box edges when the opening is cut cleanly. Where drywall is chewed up around the box, an oversized plate covers more wall - the Pass & Seymour SPJ Series is a junior-jumbo thermoset plate, though its opening is cut for a toggle switch rather than a rectangular Decora device.
11) Can I use the Bryant P26GY on a commercial job, or is it residential only?
Both. It is a straightforward single-gang cover used in residential, commercial and light-industrial wiring device installations, including new construction and device replacement work on renovations.
12) Does the Bryant P26GY hide the box edges and mounting screws once it is on?
It does. The plate sits flush to the wall and conceals the device opening, the mounting screws and the edges of the box. It is a one-piece cover, so there is no separate frame or snap-on trim to order with it.
13) My other plates on the job are light almond or white - what matches instead of gray?
The Bryant P26GY is finished in gray. If the job standard is a different color, the Pass & Seymour TP703LA is light almond nylon and the Pass & Seymour TP126-LA is a light almond Trademaster nylon plate; the Cooper 2138WBOX and the Mulberry 76103 are white. Note those are 2-gang and 3-gang parts, so match the gang count to the box as well as the color.
How fast can I get the Bryant P26GY delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant P26GY come with a warranty?
Absolutely. The Bryant P26GY is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant P26GY?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bryant P26GY from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.