Bryant Single Grounding Recept...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$19.73
Bryant Single Grounding Receptacle, Industrial Grade

Bryant Single Grounding Receptacle, Industrial Grade

(No reviews yet) Write a Review

Model: BRY5258

In Stock (leaves warehouse same day if ordered before 3pm ET)

$19.73
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bryant Single Grounding Receptacle, Industrial Grade

The Bryant Single Grounding Receptacle is a dedicated, non-duplex wiring device engineered for secure, code-compliant power connections in professional electrical work. This family is available across Bryant model numbers 5258, 5284, and 5684, each built to a specific straight-blade configuration so installers can match the correct receptacle to the equipment being connected. As a single grounding receptacle rather than a shared duplex outlet, each model provides a dedicated connection point for equipment requiring its particular plug pattern, keeping circuits clearly isolated and simplifying both installation and future troubleshooting. Bryant designs these receptacles to deliver dependable, repeatable performance in commercial and industrial settings where consistent contact engagement, secure plug retention, and safe grounding are essential to reliable equipment operation.

Key Features

  • Model Selection: Offered in Bryant model numbers 5258, 5284, and 5684, each corresponding to a specific straight-blade receptacle configuration.
  • Grounding Receptacle: Incorporates a dedicated grounding contact, supporting safe, code-compliant power connections for connected equipment.
  • Single Receptacle Design: A dedicated single-outlet configuration rather than a shared duplex outlet, keeping individual circuits clearly isolated by device.
  • Bryant Engineering: Manufactured by Bryant, a recognized name in professional-grade wiring devices used across commercial and industrial installations.
  • Secure Contact Engagement: The straight-blade contact design is built to hold mating plugs firmly in place, helping to reduce accidental disconnects during use.
  • Straightforward Specification: Each model number allows for clear specification, ordering, and replacement matching for its specific receptacle configuration.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications for each model (5258, 5284, 5684).

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Dedicated-Circuit Power Connections for Specific Equipment Plug Types
  • Panelboard and Distribution Wiring Upgrades
  • Renovation and New Construction Projects
  • Replacement of Existing Single Grounding Receptacles
  • Facility and Maintenance Electrical Repairs

Why Bryant?

Bryant is an established name in professional-grade electrical devices, and this single grounding receptacle family reflects that standard across its 5258, 5284, and 5684 models, each with a dedicated grounding contact for safe, dependable connections. Specifying Bryant means choosing a receptacle built for the demands of commercial and industrial electrical work, where correct plug engagement and secure grounding directly support safe, reliable equipment operation. Shop the full Bryant receptacle lineup at ZenSupply for consistent, code-compliant electrical devices backed by a trusted manufacturer name.

Manufacturer Resources

Bryant Full Line Catalog

Product Specs

Product Type:
Receptacle
Configuration:
NEMA 6-15R
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets
list_batch:
BRY-20260909

Bryant BRY5258 – Frequently Asked Questions

1) What single receptacle works for standard 125V equipment instead of a NEMA 6-15R device?
The Bryant 5684 is built to the NEMA 6-15R straight-blade pattern, which is a 250V two-pole configuration and will not accept an ordinary 125V cord cap. For a standard 125V single outlet, the Eaton 816W is a commercial specification grade single receptacle rated 15A, and the Eaton 6450W is a heavy-duty industrial specification grade decorator single receptacle that lands #14-10 AWG conductors. Both keep the one-outlet, dedicated-circuit format while serving the common 125V plug pattern.
2) I need two outlets on the circuit, not one. What should I use instead of the Bryant 5684?
The Bryant 5684 is a single (non-duplex) grounding receptacle, so it gives one dedicated connection point per device. If the opening calls for two, the Eaton 5262W is a heavy-duty industrial duplex receptacle in 15A 125V NEMA 5-15R, and the Pass & Seymour 26352W is a 20A 125V heavy-duty spec grade decorator duplex in white. Note that both of those are 125V patterns rather than the 6-15R pattern the 5684 uses.
3) For a patient care area or a wet location, what should I specify rather than the Bryant 5684?
The Bryant 5684 is a straight-blade grounding receptacle for general commercial and industrial circuits. Where hospital grade and ground-fault protection are required, the Pass & Seymour 2097HGI is a hospital grade 20A duplex self-test GFCI receptacle in ivory. For a hazardous or explosionproof location, Appleton offers the FSQC Series interlocked explosionproof receptacle and the U-Line ECS factory-sealed 15 and 20 amp 3-pole plug and receptacle set.
4) Is the Bryant 5684 a duplex or a single outlet?
Single. The 5684 gives one receptacle face rather than two, so the circuit feeds one piece of equipment and nothing else can be plugged in beside it. That is what you want on a dedicated branch circuit for a 6-15R load, and it makes the circuit obvious to whoever troubleshoots it later.
5) Does the Bryant 5684 have a ground contact, or is it an older ungrounded device?
It is a grounding receptacle with a dedicated grounding contact, so the equipment ground conductor lands on the device and carries through to the plug's U-blade. It is not an ungrounded two-wire outlet.
6) Which Bryant model numbers are sold under this receptacle group, and how do I order the right one?
Three Bryant models are offered: 5284, 5684 and 5258. Order by the model number itself, since that is the identifier Bryant uses on the device and on the replacement match. If you are replacing an existing Bryant device, read the number molded on the face or strap and specify the same one.
7) What are the alternatives if a straight-blade 6-15R is not what my equipment needs?
Depends on the cord cap on the equipment. For a twist-lock connection instead of straight blade, look at the Pass & Seymour Turnlok 30A non-NEMA single receptacle or the Eaton 7379 industrial locking receptacle rated 50A, 600V/250V AC/DC. For a hazardous location, Appleton's FSQC Series interlocked explosionproof receptacle is the type used. The Bryant 5684 is a straight-blade, non-locking device and will not hold a locking plug.
8) My units need tamper-resistant outlets. Does the Bryant 5684 cover that?
The Bryant 5684 is described as a single grounding receptacle in the NEMA 6-15R pattern, without a tamper-resistant shutter feature. For dwelling-unit openings where tamper resistance is required, the Pass & Seymour 3232TRW Trademaster tamper-resistant duplex receptacle in white is the device to specify. Keep the 5684 for the dedicated 6-15R equipment circuits, since the Trademaster is a duplex 125V device and will not mate with a 6-15P plug.
9) Is the Bryant 5684 suitable for commercial and industrial work, or is it a residential device?
Bryant positions the 5684 for commercial and industrial installations, including dedicated-circuit power for 6-15R equipment, panelboard and distribution wiring upgrades, renovation and new construction, and straight replacement of existing single grounding receptacles in facility maintenance work.
How fast can I get the Bryant BRY5258 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant BRY5258 come with a warranty?
Absolutely. The Bryant BRY5258 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant BRY5258?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bryant BRY5258 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!