You may also like
Burndy YA36L11 Hylug Copper Compression Lug, 600 kcmil, 1-Hole, 1/2" Stud
Model: BUR-YA36L11
Burndy YA36L11 Hylug Copper Compression Lug, 600 kcmil, 1-Hole, 1/2" StudThe Burndy YA36L11 is a Hylug™ copper compression lug engineered for 600 kcmil copper conductors, featuring a 1-hole, 1/2"...
Burndy
$36.78
Burndy YA34LTC38FX HYLUG 350 kcmil 1-Hole Copper Compression Lug
The Burndy YA34LTC38FX is a HYLUG™ 1-hole copper compression lug engineered for terminating 350 kcmil G,H,I,K,M conductors and 373 kcmil (925/#24 strand) 373 DLO flexible copper cable. Built from solid copper with a tin-plated finish, this standard-barrel lug features a 3/8" stud size, a skived and chamfered barrel end, and a straight tongue for dependable inline connections. Rated 600V minimum and suitable for use up to 35kV at 90°C, it is UL/CSA listed and identified by Die Index 19 with blue color-coded tooling.
Key Features
- Conductor Size: Designed for 350 kcmil G,H,I,K,M conductors and 373 kcmil (925/#24) 373 DLO flexible copper cable.
- Copper Construction: Solid copper body delivers superior conductivity and long-term corrosion resistance.
- Compression Termination: Standard barrel with skived, chamfered end and a 1-5/16" strip length; compresses with Die Index 19 tooling.
- 1-Hole Mounting: Single mounting hole with a 3/8" stud size, 0.40" hole diameter, and 1.55" pad width.
- Straight Tongue: Standard straight tongue configuration for inline bus and equipment connections.
- Voltage Rating: Rated 600V minimum, suitable for use up to 35kV.
- Tin-Plated Finish: Bright tin plating resists oxidation and maintains low-resistance connections.
Certifications & Compliance
- UL Listed
- Rated per UL/CSA Standards
- RoHS Compliance Status: CM
- Rated up to 35kV, 90°C
Technical Specifications
- Mounting Holes: 1
- Product Material: Copper
- Termination Method: Compression
- Insulated: Yes
- Conductor - Copper DLO Size: 373.7 (925/#24) DLO
- Conductor - Copper DLO Size Range: 373 kcmil
- Physical Attribute - Tongue Angle: Straight
- Sub Brand: HYLUG
- Plating Type: Tin
- Application: For Flex Conductor
- Feature - Barrel Style: Chamfered
- Dimension - Stud Size inch: 3/8
- Dimension - Outside Diameter inch: 1.06 in
- Rating - KVA: 35 kV
- Dimension - Pad Width inch: 1.55 in
- Dimension - B Length fraction: 1-1/4 in
- UPC: 781810134658
- Dimension - Length Overall inch: 2.87 in
- Dimension - Hole Size inch: 0.40 in
- Dimension - Strip Length inch: 1-5/16
- Connector Type: STANDARD BARREL
- Product Type: Terminal
- Die Index: 19
- UL Listed: Yes
- Standards - RoHS Compliance Status: CM
Typical Applications
- Electrical Panel and Switchgear Terminations
- Flexible Copper (DLO) Cable Connections
- Industrial and Commercial Power Distribution
- Motor and Generator Lead Terminations
- Medium-Voltage Connections up to 35kV
Why Burndy?
Burndy's HYLUG™ compression lugs are engineered from solid copper with precision skiving, chamfering, and tin plating to deliver low-resistance, code-compliant connections. Backed by UL/CSA listing and a 35kV, 90°C rating, the YA34LTC38FX provides the reliability professional electricians demand for demanding flex-conductor terminations.
Manufacturer Resources
YA34LTC38FX Spec Sheet
Product Specs
- Dimension - Pad Width inch:
- 1.55 in
- Trade Name:
- HYLUG™
- Termination Method:
- Compression
- Conductor - Copper DLO Size Range:
- 373 kcmil
- Conductor - Copper Flex H Size:
- 350 kcmil
- Sub Brand:
- HYLUG
- Conductor - Copper Flex M Size Range:
- 350 kcmil
- Conductor - Copper Flex M Size:
- 350 kcmil
- Plating Type:
- Tin
- Conductor - Copper Flex H Size Range:
- 350 kcmil
- Conductor - Copper Flex K Size:
- 350 kcmil
- Die Index:
- 19
- Product Material:
- Copper
- Insulated:
- Yes
- Dimension - B Length fraction:
- 1-1/4 in
- Conductor - Copper Flex G Size:
- 350 kcmil
- Standards - RoHS Compliance Status:
- CM
- Conductor - Copper Flex G Size Range:
- 350 kcmil
- Color Code:
- Blue
- Connector Type:
- STANDARD BARREL
- Feature - Barrel Style:
- Chamfered
- Dimension - Strip Length inch:
- 1-5/16
- Dimension - B Length inch:
- 1.27 in
- Application:
- For Flex Conductor
- Mounting Holes:
- 1
- list_batch:
- BURNDY-20260915
- Conductor - Material:
- Copper
- Voltage - Maximum:
- 35000
- Product Type:
- Compression Lug
- Conductor - Copper Flex I Size Range:
- 350 kcmil
- Rating - KVA:
- 35 kV
- Conductor - Copper DLO Size:
- 373.7 (925/#24) DLO
- Plating:
- Tin Plated
- Rating - Minimum Voltage:
- 600
- Department:
- Electrical
- Product Group:
- Wire Connectors & Terminals
- Product Subgroup:
- Lugs & Terminals
- UL Listed:
- Yes
- Certification - CSA Approved:
- Yes
- Feature - Barrel Type:
- Standard
- Physical Attribute - Tongue Angle:
- Straight
- Physical Attribute - Number of Holes:
- 1
- Certification - cULus:
- No
- Dimension - Outside Diameter inch:
- 1.06 in
- Certification - UL Recognized:
- No
- Certification - ETL:
- No
- Plated:
- Y
- Minimum Pack Quantity:
- 1
Burndy YA34LTC38FX – Frequently Asked Questions
1) Will the Burndy YA34LTC HYLUG lug take 350 kcmil flex copper and 373 DLO cable?
Yes on both. The YA34LTC is set up for 350 kcmil Class G, H, I, K and M flexible copper conductors, and it also takes 373.7 kcmil (925 strands of #24) DLO flexible copper cable. It is a flex-conductor lug, so that is the conductor family it is barreled for, not standard Class B stranded building wire.
2) Which stud size do I order, and what is the actual hole diameter on the 3/8 inch version?
Two stud sizes are offered: 3/8 inch stud (YA34LTC38FX) and 1/2 inch stud (YA34LTC12FX). On the 3/8 inch version the mounting hole measures 0.40 inch, which clears a 3/8 inch bolt or bus stud with normal room. Match the stud size to the pad or breaker lug landing you are bolting to, since the wire barrel is identical on both.
3) What die and tooling do I need to crimp this Burndy HYLUG?
Crimp it with Die Index 19 tooling, color coded blue. Any Burndy compression tool head that accepts the Index 19 die set will make the connection; the blue code is the quick visual check on the die and on the lug barrel so an inspector can confirm the right die was used.
4) How much insulation do I strip back before crimping this 350 kcmil compression lug?
Strip 1-5/16 inches of insulation. That matches the standard barrel depth, so the conductor bottoms out in the barrel and the full crimp length lands on copper. The barrel's B length is 1-1/4 inches (1.27 in), so a short strip leaves you crimping partly on jacket and a long one leaves bare strand exposed above the barrel.
5) Can I use this lug on a medium voltage termination, or is it 600V only?
It is rated 600V minimum and is suitable for use up to 35kV at 90 degrees C, so it is usable on medium voltage terminations as well as standard panel and switchgear work. The insulation system around it, not the lug, is what governs the rest of the MV termination.
6) Is the YA34LTC UL listed for inspection sign-off?
Yes. The HYLUG YA34LTC is UL Listed and rated per UL/CSA standards, and its RoHS compliance status is CM. That covers the usual inspector question on a 350 kcmil compression termination in commercial or industrial gear.
7) Will the pad fit between the other lugs on my bus bar?
The tongue pad is 1.55 inches wide with a single mounting hole, and overall length is 2.87 inches. Tongue angle is straight, so it lands flat and inline on a bus or equipment pad rather than turning 45 or 90 degrees. On tight multi-phase landings, check your 1.55 inch pad width against the hole spacing before you commit, because a straight one-hole tongue gives you no offset to dodge a neighbor.
8) Is the copper on this lug plated, and does that matter for aluminum bus or outdoor gear?
The body is solid copper with a bright tin plating. Tin plating slows oxidation on the pad and barrel and keeps contact resistance low over time, which is why it is the usual choice for terminations exposed to humidity or in gear that sees thermal cycling. This is a copper connector, so it is for copper conductors.
9) What does the skived and chamfered barrel actually do on a DLO termination?
The barrel end is chamfered, which lets the fine strands of DLO or Class M flex cable funnel in without birdcaging or a single strand catching outside the barrel. Skiving thins the barrel wall so the crimp forms cleanly with the Index 19 die. On 925-strand #24 cable that entry geometry is the difference between a full insertion and a partial one you cannot see after the crimp.
How fast can I get the Burndy YA34LTC38FX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Burndy YA34LTC38FX come with a warranty?
Absolutely. The Burndy YA34LTC38FX is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Burndy YA34LTC38FX?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Burndy YA34LTC38FX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.