Bussmann CCPB Series Two-Pole ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$684.95
Bussmann CCPB Series Two-Pole Class CF Fusible Disconnect, 600V

Bussmann CCPB Series Two-Pole Class CF Fusible Disconnect, 600V

(No reviews yet) Write a Review

Model: CCPB-2-100CF

In Stock (leaves warehouse same day if ordered before 3pm ET)

$684.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bussmann CCPB Series Two-Pole Class CF Fusible Disconnect, 600V

The Bussmann CCPB Series two-pole Class CF fusible disconnect is a genuine Eaton series CCPB UL98 fusible disconnect switch engineered for finger-safe, code-compliant power distribution. This family is available in amp ratings from 20A to 100A, all rated 600V with a 200KA interrupt rating for dependable overcurrent protection in demanding industrial and commercial electrical systems. A Lock-On provision supports safe lockout/tagout procedures, while the finger-safe design helps protect personnel during service and inspection. This Class CF fusible disconnect is well suited to panelboards, switchboards, and other enclosures where compact, code-compliant disconnect switches are required.

Key Features

  • Two-Pole Configuration: Class CF two-pole design for balanced multi-phase disconnection in 600V systems.
  • Amp Rating Range: Available in 20A, 40A, 60A, 70A, 90A, and 100A ratings to match a wide range of circuit protection needs.
  • Voltage Rating: Rated 600V for reliable performance across industrial and commercial power distribution systems.
  • 200KA Interrupt Rating: High short-circuit current rating supports demanding fault-current environments.
  • Finger Safe Design: Reduces the risk of accidental contact with live parts during operation and service.
  • Lock-On Provision: Built-in provision supports lockout/tagout procedures for safe maintenance.
  • UL98 Fusible Disconnect: Designed and constructed to UL98 standards for enclosed switches.
  • Genuine Bussmann/Eaton Part: Manufactured within the Eaton Bussmann CCPB series for guaranteed fit and performance.

Certifications & Compliance

  • UL98 Fusible Disconnect Standard
  • CE Marked

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Industrial Power Distribution Panels
  • Commercial Electrical Switchgear
  • Motor Control Centers
  • Lockout/Tagout Safety Applications
  • Panelboard and Switchboard Wiring

Why Bussmann?

Bussmann by Eaton engineers the CCPB Series to UL98 fusible disconnect standards, combining finger-safe protection with a Lock-On provision for safer, code-compliant electrical work. With a 600V rating, 200KA interrupt rating, and amp ratings spanning 20A to 100A, this genuine Bussmann CCPB disconnect switch family delivers the dependable performance electrical professionals expect from Eaton's Bussmann brand. Choosing genuine Bussmann components helps ensure proper fit, function, and compliance when servicing or upgrading Class CF fusible disconnect installations.

Manufacturer Resources

Product Specs

Product Width:
.12 IN
Compliances:
CE Marked
Certifications:
Contact Manufacturer
Department:
Electrical
Product Type:
Fusible Disconnect Switch
Configuration:
Two-Pole
Voltage Rating:
600V
Amperage Rating:
20A - 100A
Standards:
UL98
Product Group:
Wiring Devices

Bussmann CCPB-2-100CF – Frequently Asked Questions

1) What amp ratings does the Bussmann CCPB two-pole disconnect come in?
The CCPB-2 family covers 20A, 40A, 60A, 70A, 90A and 100A, all two-pole and all rated 600V. The part numbers run CCPB-2-20CF, CCPB-2-40CF, CCPB-2-60CF, CCPB-2-70CF, CCPB-2-90CF and CCPB-2-100CF. Pick the rating to match the branch circuit and the Class CF fuse you intend to install.
2) Will the CCPB disconnect take Class CF fuses, or do I need standard Class J?
The CCPB-2 is built around Class CF fuses, which is what the CF suffix on every part number means (CCPB-2-60CF, for example). The fuse block geometry is specific to the CF form factor, so a conventional Class J or Class R fuse body is not what this switch is prepped for. Order the matching Class CF fuse at the same amp rating as the switch.
3) Can I use this Bussmann disconnect on a 480V three-phase system?
The CCPB-2 is rated 600V, so it is within rating for 480V work, but it is a two-pole device. On a three-phase, three-wire feeder you need three poles switched, so a two-pole unit is the wrong choice there. Two-pole suits single-phase 240/480V circuits or line-to-line loads. Check the pole count against your circuit before ordering.
4) What is the short circuit current rating on the Bussmann CCPB fusible disconnect?
200KA interrupting rating, which is what lets it sit on service-entrance-adjacent gear and in high available fault current locations without a separate series-rating study driving you to something else. That rating is a function of the Class CF fuse doing the interrupting, so it holds only with the correct CF fuse installed.
5) Does the CCPB disconnect support lockout/tagout for maintenance?
It has a Lock-On provision built into the switch, so it can be secured as part of a LOTO procedure. The body is also finger-safe, which reduces exposure to live parts when a tech opens the panel to inspect or change a fuse. Both are useful where facility electrical safety programs require it.
6) Is the Bussmann CCPB a UL listed disconnect switch?
The CCPB Series is built to UL98, the standard covering enclosed and dead-front switches, and the units are CE marked. UL98 is the standard a specifier typically calls out when a fusible disconnect is required in a panelboard or switchboard assembly.
7) Where does a Class CF fusible disconnect like the CCPB actually get installed?
It is a compact disconnect meant to go inside gear rather than to hang on a wall as a standalone enclosure: panelboards, switchboards, motor control centers, and industrial distribution panels. If you need a weatherproof or wall-mounted safety switch with its own enclosure, this is not that product. The CCPB is the device you mount on the bus or DIN inside an existing assembly.
8) I need a single-pole or three-pole version of the CCPB, is this it?
No. Every part number in the CCPB-2 range, from CCPB-2-20CF up to CCPB-2-100CF, is a two-pole switch. The 2 in the model number is the pole count. For one or three poles you need a different CCPB configuration, not this one.
9) Is a 70A or 90A option available, or do I have to jump from 60A to 100A?
Both are stocked as their own part numbers: CCPB-2-70CF and CCPB-2-90CF. That fills the gap between the 60A and 100A units, which matters when a motor circuit or feeder calculation lands between the common steps and you would otherwise oversize the disconnect.
How fast can I get the Bussmann CCPB-2-100CF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann CCPB-2-100CF come with a warranty?
Absolutely. The Bussmann CCPB-2-100CF is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann CCPB-2-100CF?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bussmann CCPB-2-100CF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!