Bussmann CDS Series Type D Tim...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$206.63
Bussmann CDS Series Type D Time-Delay Fuse, 600V Knife Blade End

Bussmann CDS Series Type D Time-Delay Fuse, 600V Knife Blade End

(No reviews yet) Write a Review

Model: CDS100

In Stock (leaves warehouse same day if ordered before 3pm ET)

$206.63
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bussmann CDS Series Type D Time-Delay Fuse, 600V Knife Blade End

The Bussmann CDS Series Type D Time-Delay Fuse from Eaton Bussmann is engineered for reliable overcurrent protection in 600V electrical distribution systems. This time-delay, non-indicating fuse features Knife Blade End X Knife Blade End terminals for secure connection in compatible fuse blocks and disconnects. The CDS series is available across a wide amp rating range from 12A to 600A, giving specifiers flexibility to match circuit protection to load requirements on a single, dependable platform. Sourced through the Eaton Bussmann series lineup, this fuse is intended for professional electrical distribution and equipment protection applications that call for consistent, code-compliant circuit protection.

Key Features

  • Amp Rating Range: The Bussmann CDS Series is available in 16 amp ratings from 12A through 600A, covering 12A, 15A, 25A, 35A, 40A, 45A, 50A, 60A, 70A, 80A, 90A, 100A, 150A, 250A, 400A, and 600A options for precise circuit matching.
  • Type D Time-Delay Operation: Time-delay, Type D construction rides through momentary inrush and overload conditions while still opening on sustained faults, reducing nuisance fuse replacement.
  • Knife Blade End Terminals: Knife Blade End X Knife Blade End configuration provides a secure, low-resistance connection in compatible knife-blade fuse holders and switches.
  • 600V Rating: Rated for 600V applications, suited to industrial and commercial power distribution equipment.
  • Non-Indicating Design: Non-indicating fuse body keeps the design simple and cost-effective where blown-fuse indication is not required.
  • Eaton Bussmann Series: Part of the Eaton Bussmann series lineup, reflecting Eaton's fuse engineering and manufacturing standards.
  • Standard Packaging: Supplied in standard packaging for straightforward stocking and distribution.

Technical Specifications

  • Packaging Type: Standard
  • Fuse Indicator: Non-indicating
  • Compliances: Not Applicable

Typical Applications

  • Industrial and Commercial Power Distribution
  • Motor and Equipment Circuit Protection
  • Panelboard and Switchgear Protection
  • Switchboard and Motor Control Center Protection
  • OEM Electrical Equipment Protection
  • Renovation and New Construction Electrical Projects

Why Bussmann?

Bussmann fuses from Eaton are built for dependable overcurrent protection across industrial and commercial applications. The CDS Series' Type D time-delay construction and Knife Blade End terminals reflect engineering focused on secure connections and consistent performance, while the broad 12A to 600A rating range makes it easy to standardize on one dependable fuse platform for multiple circuit protection needs. For electrical professionals who need a trusted, code-compliant fuse across a wide range of amp ratings, the Bussmann CDS Series delivers consistent protection backed by Eaton's manufacturing standards.

Manufacturer Resources

Product Specs

Packaging Type:
Standard
Department:
Electrical
Fuse Indicator:
Non-indicating
Voltage Rating:
600V
Compliances:
Not Applicable
Interrupt Rating:
10 kAIC
Product Type:
Fuse
Series:
CDS
Amperage Rating:
12A - 600A
Connection Type:
Knife Blade
Product Group:
Fuses
Product Subgroup:
Other Fuses

Bussmann CDS100 – Frequently Asked Questions

1) Will a Bussmann CDS fuse fit my ferrule-style fuse holder?
No. The CDS Series is built with knife blade ends on both terminals, so it only drops into knife-blade fuse clips, blocks, and disconnects. A holder made for ferrule (cylindrical cap) fuses will not accept it. Check the clips in your switch before ordering.
2) Which amp ratings does the Bussmann CDS Series come in?
Sixteen ratings, 12A through 600A: 12, 15, 25, 35, 40, 45, 50, 60, 70, 80, 90, 100, 150, 250, 400, and 600 amps. Part numbers follow the rating directly, so a 60A is CDS60 and a 400A is CDS400. Note there is no 20A or 30A in the line, so if your circuit calls for those you will need a different series.
3) Can I use a 600V CDS fuse on a 240V or 480V circuit?
Yes. A fuse voltage rating is a maximum, so the 600V-rated CDS can be applied on any system at or below 600V, including 208V, 240V, and 480V. What you cannot do is use it above 600V.
4) Why would I choose a time-delay fuse instead of a fast-acting one for a motor circuit?
Motors, transformers, and similar inductive loads pull several times running current for a moment at startup. The CDS is a Type D time-delay fuse, so it rides through that inrush and short overloads without opening, then still clears on a sustained fault. A fast-acting fuse sized for running current would blow every time the motor starts. For purely resistive or electronic loads with no inrush, a fast-acting fuse is the better fit.
5) Will a blown Bussmann CDS fuse show any visual indication?
No. The CDS is a non-indicating fuse, so there is no pop-up pin or window to tell you which one opened. You will need a meter or a fuse tester to find the open leg. If your maintenance crew wants at-a-glance identification on a large switchboard, specify an indicating fuse instead.
6) I need to order a replacement Bussmann CDS fuse. How do I identify the right part number?
Read the amp rating off the fuse label and add it to the CDS prefix. CDS12 is the 12A, CDS100 the 100A, CDS250 the 250A, CDS600 the 600A. All ratings in the series share the same 600V, 10 kAIC, knife blade construction, so amperage is the only variable you need to match.
7) Can I standardize on the CDS Series across a whole facility's distribution gear?
For knife-blade 600V applications under 10 kA available fault current, yes. One series covers 12A branch circuits up to 600A mains, which keeps the spare parts crib to a single family. Typical placements are panelboards, switchboards, motor control centers, and OEM equipment. Where the fault duty is higher or the holders are ferrule type, you will still need a second fuse type on the shelf.
How fast can I get the Bussmann CDS100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann CDS100 come with a warranty?
Absolutely. The Bussmann CDS100 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann CDS100?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bussmann CDS100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!