Bussmann MIC Series Fast-Actin...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$211.73
Bussmann MIC Series Fast-Acting Midget Fuse, 250V Ferrule End

Bussmann MIC Series Fast-Acting Midget Fuse, 250V Ferrule End

(No reviews yet) Write a Review

Model: MIC-1

In Stock (leaves warehouse same day if ordered before 3pm ET)

$211.73
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bussmann MIC Series Fast-Acting Midget Fuse, 250V Ferrule End

The Bussmann MIC Series is an Eaton Bussmann fast-acting Midget fuse engineered for control circuits, PLC circuits, and electronic circuits. This non-indicating, ferrule end x ferrule end fuse features a nickel-plated bronze endcap and fiber tube body, is rated 100 AIC at 250 Vac, and is CE marked. The MIC series is available in 1A, 2A, 3A, and 5A amp ratings, giving electricians and panel builders a single fast-acting fuse family to protect a range of low-current control and electronic loads at 250V.

Key Features

  • Amp Rating Range: Available in 1A, 2A, 3A, and 5A ratings to match the protection needs of control, PLC, and electronic circuits.
  • Fast-Acting Response: Fast-acting Midget fuse design clears overcurrent conditions quickly, protecting sensitive control and electronic components.
  • Durable Construction: Nickel-plated bronze endcap and fiber tube body deliver a rugged, corrosion-resistant fuse suited for standard-duty applications.
  • Ferrule End Termination: Ferrule end x ferrule end configuration for direct compatibility with standard Midget fuse holders and fuse blocks.
  • High Interrupt Rating: 100 AIC at 250 Vac interrupting rating supports reliable overcurrent protection in control circuit applications.
  • Non-Indicating Body: Standard non-indicating fuse construction for straightforward, drop-in replacement.
  • Voltage Rating: Rated 250V for use across standard control and electronic circuit voltages.

Certifications & Compliance

  • CE Marked

Technical Specifications

  • Voltage Rating: 250V
  • Product Width: .47 in
  • Compliances: CE Marked

Typical Applications

  • Control Circuit Protection
  • PLC and Programmable Controller Circuits
  • Electronic Circuit Protection
  • Industrial Automation and Control Panels
  • Standard-Duty Fuse Replacement

Why Bussmann?

Bussmann's MIC Series Midget fuses combine a nickel-plated bronze endcap and fiber tube body with a fast-acting response and a 100 AIC interrupting rating at 250 Vac, giving control panel builders and maintenance electricians a dependable, CE marked option for protecting control, PLC, and electronic circuits across the 1A to 5A range.

Manufacturer Resources

Product Specs

Connection:
Ferrule end x ferrule end
Packaging Type:
Standard
Department:
Electrical
Fuse Indicator:
Non-indicating
Voltage Rating:
250V
Product Width:
.47 in
Compliances:
CE Marked
Product Type:
Fuse
Amperage Rating:
1A-5A
Product Finish:
Nickel-Plated Bronze
Standards:
CE Marked
Product Group:
Fuses
Product Subgroup:
Other Fuses

Bussmann MIC-1 – Frequently Asked Questions

1) Can I use a 250V MIC fuse on a 480V control circuit?
No. The MIC Series is rated 250V, with a 100 AIC interrupting rating at 250 Vac. Use it on control and electronic circuits at or below 250V. For a 480V or 600V control circuit you need a 600V-rated midget fuse instead.
2) Is the MIC a fast-acting or time-delay fuse, and does that matter for a control transformer?
Fast-acting. The MIC clears overcurrent quickly, which is what you want ahead of PLC inputs, electronic boards and other sensitive components. It's the wrong choice where you expect a legitimate inrush surge, such as the primary of a control transformer or a motor starter coil circuit with high magnetizing current, because it can open on the inrush. Those applications call for a time-delay midget fuse.
3) I'm replacing a blown midget fuse in an existing control panel - how do I order the right MIC?
Match the amp rating printed on the old fuse and confirm it was a 250V fast-acting midget with ferrule ends. Then order the matching part: MIC-1 for 1A, MIC-2 for 2A, MIC-3 for 3A, MIC-5 for 5A. Never step up the amp rating to stop nuisance blowing; if a fuse keeps opening, the circuit or the fuse type is the problem, not the rating.
4) What amp ratings does the Bussmann MIC midget fuse come in?
Four ratings: 1A, 2A, 3A and 5A, ordered as MIC-1, MIC-2, MIC-3 and MIC-5. That range covers typical control transformer secondaries, PLC input/output circuits and small electronic loads. Anything above 5A needs a different Bussmann midget family.
5) Will I be able to tell at a glance which MIC fuse has blown in the panel?
No. The MIC is a non-indicating fuse, so there is no pop-up pin or flag to show it has opened. Troubleshooting means pulling the fuse and ringing it out, or metering across the holder. If you want visual indication on the panel door, specify an indicating midget fuse or a holder with a blown-fuse indicator.
6) Is the Bussmann MIC fuse CE marked for export panels?
The MIC Series is CE marked, which is the compliance it carries. That is the only marking stated for this family, so if a job spec calls out a different listing, verify against the spec before you build it into the panel.
7) What is the MIC fuse body made of, and will it hold up in a damp or industrial panel?
Construction is a fiber tube body with nickel-plated bronze endcaps. The nickel plating resists corrosion on the contact surfaces, which keeps holder clip contact clean in a typical industrial control panel. It's rated for standard-duty use, not for a sealed or submerged application.
How fast can I get the Bussmann MIC-1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann MIC-1 come with a warranty?
Absolutely. The Bussmann MIC-1 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann MIC-1?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bussmann MIC-1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!