B-Line CABLE SUPPORT FITTING, SERIES 2,3,4&5, 5" / 6" HEIGHT, 9" WIDTH, 12" RADIUS, ALUMINUM

The 6A-09-CSF12 is built for 9 inch wide tray with a 6 inch loading depth (5 inch NEMA), and it is made for B-Line Series 2, 3, 4 and 5 cable tray. The fitting is formed to a 12 inch radius. If your tray run is a different width or a different series, you need the matching fitting instead, since the width and rail height have to line up with the tray rails for the splice to land correctly.

A cable support fitting carries the cables where they leave or drop out of the tray, so the cable bends over a formed radius instead of a sharp tray edge. On the 6A-09-CSF12 that radius is 12 inches, which is what protects large power or data cable from being kinked below its minimum bend radius at the exit point. If your run is straight tray with no drop-outs or terminations, you do not need one; if cables leave the tray to a panel, device or vertical drop, you do.

Order it as B-Line 6A-09-CSF12. That single number covers the aluminum 9 inch wide, 6 inch height (5 inch NEMA) support fitting with the 12 inch radius for Series 2, 3, 4 and 5 tray.

The listed item is the aluminum fitting itself. Splice plates and connection hardware for B-Line Series 2 through 5 tray are ordered separately, so check what your tray run already has on hand before the crew gets to the drop-out.