Cal-Royal PUL203 Solid Bar Rou...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$21.33
Cal-Royal Cal-Royal PUL203 Solid Bar Round Pull 3/4" Diameter, 2-1/4" Projection, 8" CTC CAL-PUL203

Cal-Royal PUL203 Solid Bar Round Door Pull with 3/4" Diameter, 2-1/4" Projection, 8" CTC

(No reviews yet) Write a Review

Model: PUL203-US28
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$21.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Cal-Royal PUL203 Solid Bar Round Door Pull with 3/4" Diameter, 2-1/4" Projection, 8" CTC

The Cal-Royal PUL203 is a solid bar round door pull engineered for durable, everyday use on commercial doors. Featuring a 3/4" diameter bar, 2-1/4" projection, and 8" center-to-center (CTC) mounting, this pull is built from Stainless Steel, Brass and Aluminum material for solid, dependable construction. It uses a Type 1 thru-bolt mount designed for 1 ¾" thick doors, making it a straightforward upgrade or replacement for commercial door trim applications.

Key Features

  • Bar Diameter: 3/4" solid round bar for a comfortable, secure grip.
  • Projection: 2-1/4" projection provides adequate clearance for hand access.
  • Mounting Centers: 8" CTC hole spacing for standard door pull installations.
  • Mounting Type: Type 1 thru-bolt mount designed specifically for 1 ¾" thick doors.
  • Heavy-Duty Construction: Made from Stainless Steel, Brass and Aluminum material for solid, long-lasting performance.
  • Solid Bar Design: Solid construction resists bending and wear in high-traffic commercial settings.
  • Individually Packed: Each unit is individually packed for protection during shipping and easy inventory handling.
  • Easy Installation: Designed for easy installation using the thru-bolt mounting method.
  • Finish Options: Architectural finishes available to match surrounding door hardware.

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Series: Door Pulls Series
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Door Pulls
  • Subcategory: Door Pulls
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Cal-Royal PUL203?

Cal-Royal door pull products deliver dependable, professional-grade performance with solid Stainless Steel, Brass and Aluminum construction built to withstand daily commercial use. The PUL203's solid bar design and Type 1 thru-bolt mounting make it a reliable choice for facility managers and installers seeking straightforward, long-lasting door hardware for demanding commercial environments.

Product Specs

Product Group:
Door Trim and Accessories
Series:
Door Pulls Series
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Subcategory:
Door Pulls
Commercial/Residential:
Commercial
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Cal-Royal PUL203-US28 – Frequently Asked Questions

1) What is the hole spacing on the Cal-Royal PUL203 pull, and will it land on my existing holes?
Mounting centers are 8 inches on the PUL203, so it drops onto an opening already drilled for 8 inch CTC pull. If the door you're replacing was bored on any other spacing, the existing holes won't line up and you'll be patching or re-prepping the leaf. Measure center of hole to center of hole before you order.
2) What's the closest equivalent to the Cal-Royal PUL203 from another brand?
The Ives 8102HD is the nearest match in shape and grip: a heavy duty straight pull on the same 3/4 inch round bar, though it's listed at 1-1/2 inch clearance rather than the PUL203's 2-1/4 inch projection, so it stands closer to the door face. If you want a thicker bar, the Ives 8103HD is a 1 inch round straight pull with through bolt mounting, and the ABH AB3300 is a straight flat end pull at 1 inch diameter.
3) What is a close equivalent to the Cal-Royal PUL203 round door pull with a 3/4 inch bar?
The Ives 8102HD heavy duty straight door pull also uses a 3/4 inch round bar, matching the PUL203's 3/4 inch solid bar diameter. The Ives 8102HD is listed with 1-1/2 inch clearance, where the PUL203 carries a 2-1/4 inch projection, so if hand clearance behind the grip matters on the opening, the two are not identical. Both are straight solid bar pulls intended for commercial doors.
4) The opening needs an offset pull rather than a straight one - what takes the place of the Cal-Royal PUL203?
The Cal-Royal PUL203 is a straight solid bar round pull, so for an offset grip look at the Ives 8169, a C style offset solid door pull with a 1 inch diameter and heavy duty mounting, or the ABH AB3330, an offset round end pull available with custom length options. The ABH AB3310 is an offset flat end pull in a commercial grade surface mount configuration, which differs from the PUL203's thru-bolt mounting.
5) Which door pull should I specify when the opening has to be ADA compliant?
The Ives 8145EZHD is a 45 degree offset door pull with heavy duty mounting hardware described as ADA compliant in the EZ series. The Cal-Royal PUL203 is a solid bar round pull with a 3/4 inch bar and 2-1/4 inch projection for commercial door trim; if the drawing calls out ADA specifically, the 8145EZHD carries that callout.
6) How much hand clearance does the Cal-Royal PUL203 give behind the bar?
Projection is 2-1/4 inches, measured off the door face, on a 3/4 inch solid round bar. That's enough room to get a gloved hand behind it on a commercial opening. Where the pull sits close to a jamb, a sidelite frame, or a door in a pair that swings past adjacent trim, check that 2-1/4 inches of standoff clears whatever is beside it.
7) What finishes does the Cal-Royal PUL203 round pull come in?
Four finishes: US3 polished brass, US10B antique bronze oiled, US28 satin aluminum clear anodized, and US32D satin stainless steel. For matching a building already standardized on brushed hardware, US32D is the usual commercial pick; US28 pairs with anodized aluminum storefront entrances rather than with steel or wood doors.
8) Do I need one PUL203 per door, or a pair back to back?
The PUL203 is a single pull with 8 inch centers and Type 1 thru-bolt mounting, so it's ordered per side. Thru-bolt hardware needs something to bolt against on the far face, which on most commercial installs is a push plate or a second pull. If you want a matched grip on both faces, order two and specify the same finish for each.
9) Should I use a straight round bar pull like the Cal-Royal PUL203 or an offset pull?
A straight bar sits parallel to the door face and is the plain choice for entrances, corridor doors, and any opening where the user just grabs and pulls. Offset pulls angle the grip away from the door and suit doors where you're pulling at an angle or need more knuckle room off the stile. If you want offset instead, ZenSupply carries the ABH AB3310 flat end offset pull, the AB3330 offset round end pull with custom length options, the Ives 8169 C style offset pull at 1 inch diameter, and the Ives 8145 45 degree offset.
10) Is the Cal-Royal PUL203 heavy enough for a high traffic entrance, or is it a residential pull?
It's a commercial pull. Solid bar construction in stainless steel, brass and aluminum, not a hollow tube, which is what keeps it from bending or working loose under constant use in offices, schools, healthcare, retail and warehouse openings. For a residential or decorative interior door where appearance leads, the Emtek Art Nouveau, Arts and Crafts, Baden and Brisbane 8 inch pulls are the cast decorative alternatives.
11) I need a longer pull than 8 inches for a full-height glass or storefront door. What are my options?
The PUL203 is fixed at 8 inch centers, so it won't span a tall entrance stile the way a ladder pull does. For longer grips, ZenSupply carries the Deltana SSP1210 12 inch contemporary pull as a single side unit, and 24 inch back-to-back sets in both the Deltana SSPOBB24 modern offset and the SSPORBB24 round offset. The ABH AB3330 offset round end series also lists custom length options.
12) Do the Trimco 1001 and 1070 plates substitute for the Cal-Royal PUL203?
No. The Trimco 1001-1 is a heavy duty push plate measuring 3 inches by 12 inches and the Trimco 1041 is a half-round push plate 8 inches by 16 inches - flat plates for the push side, not a grip. The Trimco 1070 series is a classic push/pull plate at 3-1/2 inches by 15 inches, which combines a plate with a pull rather than being a bar on its own. The Cal-Royal PUL203 is a 3/4 inch solid round bar with a 2-1/4 inch projection you actually grasp, so it fills the pull side of the opening; a push plate covers the opposite leaf.
13) Is there a slimmer through-bolted stainless pull than the Cal-Royal PUL203?
The ABH AB7200 is a solid stainless steel flat end pull handle with a 7/8 inch diameter and through-bolt mounting. The Cal-Royal PUL203 is a solid bar round pull with a 3/4 inch diameter using a Type 1 thru-bolt mount, and is offered in US32D satin stainless steel among its finishes. Both mount through the door, so the swap is about bar diameter and end style rather than a different prep.
14) Is the Trimco 1035 restroom pull the same thing as a Cal-Royal PUL203?
They are different parts. The Trimco 1035 is the Ultimate Restroom Pull, a heavy duty pull built for restroom door use. The Cal-Royal PUL203 is a general purpose solid bar round pull with a 3/4 inch bar, 2-1/4 inch projection, and 8 inch center-to-center mounting used across commercial office, educational, healthcare, retail, and government openings. If you are standardizing hardware across a building, the PUL203 covers the general openings and the 1035 addresses the restroom application specifically.
15) What is the difference between a flat end pull and the Cal-Royal PUL203's round bar?
The difference is the end treatment where the bar meets the door. The ABH AB3300 and AB7200 are flat end pull handles, at 1.00 inch and 7/8 inch diameter respectively, and the ABH AB3310 is an offset flat end pull. The Cal-Royal PUL203 is a solid bar round pull with a 3/4 inch diameter bar and a 2-1/4 inch projection. The ABH AB3330 is an offset round end pull, so round and flat end styles exist on both straight and offset bodies.
16) How is the Cal-Royal PUL203 packaged if I'm ordering several for a building?
Each PUL203 is individually packed, so units arrive protected and can be counted and staged per door without breaking down a bulk carton. Useful when you're standardizing several openings and want the same finish across a floor.
How fast can I get the Cal-Royal PUL203-US28 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cal-Royal PUL203-US28 come with a warranty?
Absolutely. The Cal-Royal PUL203-US28 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cal-Royal PUL203-US28?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Cal-Royal PUL203-US28 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!