Cal-Royal PUL211 Solid Bar Doo...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$42.38
Cal-Royal Cal-Royal PUL211 Solid Bar Pull Handle, 3/4" x 1/2" Ellipse, 1-3/4" Projection, 5-1/2" CTC CAL-PUL211

Cal-Royal PUL211 Solid Bar Door Pull Handle, 3/4" x 1/2" Ellipse, 1-3/4" Projection, 5-1/2" CTC

(No reviews yet) Write a Review

Model: PUL211-US26
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$42.38
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Cal-Royal PUL211 Solid Bar Door Pull Handle, 3/4" x 1/2" Ellipse, 1-3/4" Projection, 5-1/2" CTC

The Cal-Royal PUL211 is a solid bar door pull handle featuring a 3/4" x 1/2" ellipse cross-section, 1-3/4" projection from the door face, and 5-1/2" center-to-center mounting dimension. Constructed from stainless steel, brass, or aluminum, this pull is engineered with a Type 1 thru-bolt mount designed specifically for 1-3/4" thick doors, making it a dependable choice for commercial entry applications requiring a durable, low-maintenance grip solution.

Key Features

  • Bar Dimensions: 3/4" x 1/2" ellipse profile provides a comfortable, secure grip for daily commercial door traffic.
  • Projection: 1-3/4" projection from the door surface allows for easy, ergonomic hand clearance during operation.
  • Mounting Spread: 5-1/2" center-to-center hole spacing ensures straightforward alignment during installation.
  • Door Thickness Compatibility: Type 1 thru-bolt mounting is designed for 1-3/4" thick doors, a standard commercial door dimension.
  • Premium Material Options: Available in stainless steel, brass, and aluminum construction for durability across a range of commercial environments.
  • Architectural Finishes: Offered in architectural finishes to complement a variety of door hardware and design schemes.
  • Easy Installation: Simple thru-bolt design allows for straightforward, efficient mounting without specialized tools.
  • Individually Packaged: Each pull handle ships individually packed to protect the finish and ensure it arrives ready for installation.

Technical Specifications

  • Product Group: Door Trim and Accessories
  • Series: Door Pulls Series
  • Product Subgroup: Door Pulls, Push and Pull Plates
  • Product Type: Door Pulls
  • Subcategory: Door Pulls
  • Commercial/Residential: Commercial
  • Product Category: Door Trim and Accessories
  • Department: Door Hardware

Typical Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Cal-Royal PUL211?

Cal-Royal door pull products are built from stainless steel, brass, or aluminum for lasting durability in demanding commercial settings. The Type 1 thru-bolt mounting design and precise 5-1/2" CTC dimension ensure a reliable, secure fit on standard 1-3/4" thick doors. Engineered for easy installation and individually packaged for protection, the PUL211 delivers dependable, professional-grade performance for everyday commercial door hardware needs.

Product Specs

Product Group:
Door Trim and Accessories
Series:
Door Pulls Series
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Door Pulls
Subcategory:
Door Pulls
Commercial/Residential:
Commercial
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Cal-Royal PUL211-US26 – Frequently Asked Questions

1) Will the Cal-Royal PUL211 pull work on a 1-3/4 inch commercial door?
That is exactly what it's built for. The PUL211 uses a Type 1 thru-bolt mount sized for 1-3/4 inch thick doors, which is the standard commercial door thickness. On a thinner door the thru-bolt fasteners will run long and stand proud of the opposite face, so for a 1-3/8 inch residential or older interior door you want a pull specified for that range instead.
2) What is the hole spacing on the Cal-Royal PUL211 door pull?
Mounting holes are 5-1/2 inches center to center. If you're replacing an existing pull, measure the two holes already drilled in the door: match 5-1/2 inches and the PUL211 drops onto the same prep with no new boring. Anything else and you're patching and re-drilling the face.
3) Can I put a Cal-Royal PUL211 on a residential door that's 1-1/8 to 1-3/8 inches thick?
No. The PUL211's thru-bolt mount is sized for 1-3/4 inch doors. For thinner leaves, the Deltana OHP620 off-set handle pull is specified for 1-1/8 to 1-3/8 inch door thickness and is the right part for that opening.
4) I need a pull on both sides of the door, back to back - is the Cal-Royal PUL211 the right part?
The PUL211 is a single solid bar pull thru-bolted on a 1-3/4" thick door with 5-1/2" center-to-center holes, so it is specified one face at a time. If the opening calls for a matched pull on each face as a set, the Deltana OHP620 is an off-set handle pull supplied as a back-to-back set for doors 1-1/8" to 1-3/8" thick, and the Deltana SSPOBB24 and SSPORBB24 are 24" back-to-back offset pulls in modern square and round profiles. Watch the door thickness on the OHP620 - its 1-1/8" to 1-3/8" range does not cover the 1-3/4" door the PUL211 is built for.
5) What is a straight equivalent to the Cal-Royal PUL211 solid bar pull if I want a round bar instead of the ellipse profile?
The Cal-Royal PUL211 uses a 3/4" x 1/2" ellipse bar with a 1-3/4" projection and 5-1/2" center-to-center mounting. If you want the same solid-bar straight pull in a round section, the Ives 8102HD is a heavy duty straight door pull with a 3/4" round bar and 1-1/2" clearance, and the Ives 8103HD is a heavy duty straight pull with a 1" round bar and through bolt mounting. All three are straight solid-bar pulls that thru-bolt through the door; the difference is the grip section and the clearance behind the bar, which is what your hand feels and what a gloved hand needs.
6) The PUL211 does not give me enough hand clearance on a door with a closer arm in the way - what offset pull should I use instead?
The PUL211 is a straight bar with a 1-3/4" projection off the door face. When the approach to the grip is obstructed and you need the bar carried away from the door on legs, go to an offset pull: the Ives 8169 is a C style offset solid pull in 1" diameter with heavy duty mounting, the Ives 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware in the ADA compliant EZ series, and the ABH AB3310 is an offset flat end pull handle in a commercial grade surface mount. Offset pulls change the hole pattern in the door, so the 5-1/2" center-to-center layout of the PUL211 will not carry over.
7) How much hand clearance does the Cal-Royal PUL211 give behind the bar?
The bar stands 1-3/4 inches off the door face, so there's room for a full gloved hand behind it. The grip itself is a 3/4 by 1/2 inch ellipse rather than a round bar, which gives a flatter face against the palm on a door that gets pulled all day.
8) What finishes does the Cal-Royal PUL211 solid bar pull come in?
Five: US3 polished brass, US10B antique bronze oiled, US15 satin nickel, US26 polished chrome, and US32D satin stainless. For a building where you're matching existing lever and closer hardware, US32D is the usual commercial default and US26 the usual bright one. Order the same finish code across every opening and the pulls will read as one set.
9) Straight bar pull or offset pull for a commercial entry door?
A straight bar like the PUL211 mounts parallel to the door edge and is the simplest thing to align, at 5-1/2 inches center to center. An offset pull angles the grip away from the face, which suits doors where you want the hand pulling off-axis or where an ADA push/pull sequence is being detailed. If offset is what the drawing calls for, the Ives 8145EZHD is a 45 degree offset and the Ives 8169 a C style offset; the ABH AB3310 is an offset flat end pull.
10) Is the Cal-Royal PUL211 solid metal or a hollow tube?
Solid bar, not tube. Material is stainless steel, brass, or aluminum depending on the finish ordered. A solid section matters on high-traffic openings, where a hollow pull can dent or flex at the mounting posts over years of use.
11) I need a pull on one side and something to push on the other. What goes on the back of the door?
Since the PUL211 thru-bolts through the leaf, the opposite face is open for a push plate. The Trimco 1001-1 is a 3 by 12 inch heavy duty push plate, the Trimco 1041 a half-round push plate at 8 by 16 inches, and the Trimco 1070 Series push/pull plates run 3-1/2 by 15 inches. Match the finish code to the pull so the opening reads consistently.
12) Is the Cal-Royal PUL211 handed? Do I need to specify left or right?
No handing on the PUL211. It's a symmetrical straight bar, so the same part works on a left or right hand door and on either leaf of a pair. Decorative cast pulls can be handed (the Emtek Art Nouveau 8 inch pull is ordered by handing, for instance), but a straight bar is not.
13) What looks like a substitute for the Cal-Royal PUL211 but is not a pull at all?
Push and pull plates come up in the same searches and are not interchangeable with the PUL211. The Trimco 1001-1 is a heavy duty push plate at 3" x 12" and the Trimco 1041 is a half-round push plate at 8" x 16" - both are flat protective plates for the push face with no grip to pull on. The Trimco 1070 series classic push/pull plates at 3-1/2" x 15" combine a plate with an integral grip, which is a different look and a different hole pattern from the PUL211's 5-1/2" center-to-center bar. If the drawing calls for a bar you wrap a hand around on a 1-3/4" door, the PUL211 is the pull and the plates are not.
14) I need a longer pull than the 5-1/2" center-to-center Cal-Royal PUL211 for a glass front or storefront entry - what are the options?
The PUL211 is a short grip pull at 5-1/2" center-to-center. For the long vertical pulls typical of a glass front entrance, the Deltana SSP1210 is a 12" contemporary pull mounted single side, the Deltana SSPOBB24 is a 24" back-to-back modern offset pull, and the ABH AB3330 series offset round end pull is offered with custom length options if the opening needs a length the stock parts do not hit. Length changes the mounting hole layout, so confirm the hole centers against the door or glass prep before ordering.
15) Is there a stainless steel alternative to the Cal-Royal PUL211 for a washdown or high traffic commercial opening?
The PUL211 is built in stainless steel, brass, or aluminum and is offered in US32D satin stainless steel among its finishes. If you want a pull that is solid stainless throughout, the ABH AB7200 is a solid stainless steel flat end pull handle in 7/8" diameter with through-bolt mounting, and the ABH AB3300 is a straight flat end pull in 1.00" diameter. Both are through-bolted straight pulls like the PUL211, so the install method is familiar - the grip diameter and the end treatment are what change.
16) The opening is a restroom door where people do not want to touch the handle - is the PUL211 the right pull?
The PUL211 is a general commercial bar pull for entry doors in offices, schools, healthcare, retail, and multi-tenant residential. For a restroom door specifically, the Trimco 1035 Ultimate Restroom Pull is a heavy duty pull built for that opening, and it is the part to look at when the requirement is a restroom-specific grip rather than a standard bar. The PUL211 remains the straightforward choice where a plain 3/4" x 1/2" ellipse bar on 5-1/2" centers is what the door needs.
17) Do the Cal-Royal PUL211 pulls come packed individually or in bulk cartons?
Each PUL211 ships individually packed, so the finish stays protected in transit and on the job site. If you're buying a run of them for a building, they arrive as separate units rather than loose in a carton, which matters when the order is polished brass or polished chrome and scuffing is the risk.
How fast can I get the Cal-Royal PUL211-US26 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cal-Royal PUL211-US26 come with a warranty?
Absolutely. The Cal-Royal PUL211-US26 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cal-Royal PUL211-US26?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Cal-Royal PUL211-US26 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!