You may also like
Callan Carlyle Passage Door Knobset
Passage Function: Passage lever sets have no locking function and are free turning on both sides. These are perfect for a hallway or closet where no locking is necessary.
Features:
- Meets BHMA security grade 3 requirements
- Made of durable zinc
- Fully reversible handing for left or right handed applications
- Designed for an easy one person installation
- Comes standard with a round corner latch faceplate and 1/2" throw
- Includes a limited lifetime warranty on mechanical parts and a five year warranty on finish
Specifications:
- Backset: Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-3/8" to 1-3/4"
- Handing: Reversible Left or Right
- Projection: 2-3/8"
- Latch Faceplate: Round Corner
- Cylinder: 5 Pin KW1
- Concealed Screws: No
- Material: Zinc
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- Carlyle
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Function:
- Passage
- Product Type:
- Knobsets
- Grade:
- Grade 3
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Passage/Hall/Closet
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Callan KE1011 – Frequently Asked Questions
1) Will the Callan Carlyle passage knob fit a 1-3/8 inch interior door?
Yes. The Carlyle passage knobset covers 1-3/8 inch through 1-3/4 inch doors, so it works on both older interior slabs and standard 1-3/4 inch doors without a spacer kit. Backset is adjustable between 2-3/8 and 2-3/4 inches, which are the two standard bored-door backsets, so one part number covers either prep.
2) Can I put a Carlyle passage knob into the holes left by an old knob without re-boring the door?
In most cases yes. The Carlyle passage set uses the standard 2-1/8 inch cross bore and 1 inch edge bore, which is the common bored-lock prep, and the adjustable backset picks up either a 2-3/8 or 2-3/4 inch centerline. The latch has a round corner faceplate, so if the existing latch mortise was cut for a square corner face you will need to square that pocket or use a corner shim.
3) Does a passage knob lock at all, or do I need a privacy set for a bathroom?
Passage means no lock. Both knobs on the Carlyle turn freely at all times, which is what you want on a hall, closet, laundry or pantry door. For a bathroom or bedroom you need a privacy function with a push-button or turn-button inside. Options ZenSupply carries include the Pamex FTF Baron privacy knob (Grade 3) and the Dexter C2000 privacy ball knob (Grade 2).
4) Will the Carlyle latch catch in my existing strike plate?
The Carlyle latch throws 1/2 inch, the normal projection for a residential bored latch, so it will engage a standard strike already mortised in the jamb provided that strike lines up with a 2-3/8 or 2-3/4 inch backset. If the old strike lip is bent or the gap at the jamb has grown, plan on resetting the strike rather than shimming the latch.
5) I need a passage knob for a commercial corridor with heavy traffic - what should I use instead of a residential Grade 3 set?
Step up to the Schlage D10S passage latch, a Grade 1 heavy duty cylindrical non-keyed knob lock in the D Series with an Orbit knob, or the Falcon X101 heavy duty Grade 1 cylindrical passage knobset, which is fire rated and covers doors 1-3/8 inch to 2-1/4 inch. The Callan Carlyle passage knobset is a Grade 3 residential set, so on a commercial corridor the Grade 1 sets are the ones written to that duty cycle.
6) My doors are thicker than 1-3/4 inch - which passage knob will fit?
The Corbin Russwin CK4310 passage/closet cylindrical lock is a Grade 1 non-keyed Global knob set covering 1-3/8 inch to 2 inch doors, and the Falcon X101 Grade 1 heavy duty passage knobset covers 1-3/8 inch to 2-1/4 inch. The Callan Carlyle passage knobset is built for doors 1-3/8 inch to 1-3/4 inch, so on a thicker slab those two carry the range.
7) What is the closest equivalent to the Callan Carlyle passage knobset from another brand?
The Pamex FTF Baron knob lockset in the passage function is the nearest match: it is a Grade 3 passage/hall/closet knob lockset for doors 1-3/8 inch to 1-3/4 inch thick, the same grade, function and door thickness range the Carlyle passage knobset covers. Both are non-locking sets meant for hallways and closets, so the swap is a matter of knob styling rather than prep or door range.
8) The door is a bedroom or bathroom and needs to lock - what takes the place of a passage knobset?
Use a privacy set. The Pamex FTF Baron knob lockset in the privacy function is Grade 3 for doors 1-3/8 inch to 1-3/4 inch, matching the Carlyle passage knobset's grade and door range, and the Cal-Royal BER20 is a Grade 3 privacy knob lock with brass trim over the same 1-3/8 inch to 1-3/4 inch range. The Callan Carlyle passage knobset is free turning on both sides with no locking function, so it will not serve a bed or bath door.
9) The opening needs a key - what is the keyed counterpart to a passage knob at the same grade?
The Cal-Royal BER00 is a Grade 3 entrance/office knob lock with a Kwikset keyway for doors 1-3/8 inch to 1-3/4 inch, and the Pamex FTF Baron in the entrance/office function is Grade 3 over the same door range. Both hold the grade and door thickness range of the Callan Carlyle passage knobset while adding a keyed outside knob, which the Carlyle passage function does not have.
10) Do I have to order the Callan Carlyle knob left or right handed?
No handing to specify. The Carlyle passage knobset is fully reversible and works on a left or right hand door as it comes out of the box, so you can order one part number for a whole floor of doors and sort swings on site.
11) What finishes does the Callan Carlyle passage knob come in, and can I match it across a whole building?
Six finishes: US10B oil rubbed bronze, US10BE edged bronze, US15 satin nickel, US15A antique nickel, US19 black, and antique silver. That is the full range, so a property manager standardizing hall and closet doors across units can pick one and repeat it.
12) I need matching passage and keyed entry knobs for the same house. Does the Carlyle passage set come keyed?
No. The Carlyle passage function has no cylinder and cannot be keyed. For the keyed openings, ZenSupply carries Grade 3 entry knobs including the Cal-Royal BER00 entrance/office knob with a Kwikset keyway and the Kwikset 400P-CP keyed entry knob, both rated for 1-3/8 to 1-3/4 inch doors, plus the Delaney Belton and Delaney Galway Grade 3 entrance knobsets. Knob styling will not match exactly across brands, so pick the entry set first if appearance matters.
13) Do I need a passage knob or a dummy knob on a closet door?
If the door has a latch and needs to stay shut, you want the passage set: the Carlyle knob retracts a 1/2 inch latch into a strike. If the door is held by a ball catch, a magnetic catch, or is a false or inactive leaf, you only need a dummy knob that is screwed to the face and does not turn. ZenSupply carries dummy knobs such as the Cal-Royal BA40 and the Schlage A170 single dummy trim.
14) What is the closest alternative to the Callan Carlyle passage knob if I want something similar?
Closest like for like is the Pamex FTF Baron passage knob, also Grade 3 and rated for 1-3/8 to 1-3/4 inch doors. Bravura's Albany and Lynchburg round trim passage knobsets are Grade 2 in the same residential styling family. If you want a step up in duty for the same function, the Dexter C2000 Grade 2 passage ball knob and the Corbin Russwin CK4410 Grade 2 passage knob both cover 1-3/8 to 1-3/4 inch doors.
15) Is a dummy knob the same as a passage knob?
No. A dummy knob is a fixed pull with no latch behind it - the Schlage A170 single dummy trim is a Grade 2 non-keyed knob lock in the dummy function, and the Bravura Biloxi with round trim is a Grade 2 dummy knobset. The Callan Carlyle passage knobset is a latching set that turns to retract a latch with a 1/2 inch throw and an adjustable 2-3/8 inch or 2-3/4 inch backset, so it holds a door closed where a dummy will not.
16) What is a Grade 2 passage knob alternative if the spec calls for a higher grade than residential?
The Dexter C2000 Series passage cylindrical ball knob lock is Grade 2, non-clutching and non-keyed for doors 1-3/8 inch to 1-3/4 inch, the Arrow MK01 is a Grade 2 non-keyed passage cylindrical knob lock in the MK Series over the same door range, and the Corbin Russwin CK4410 is a Grade 2 passage/closet cylindrical lock with a Global knob in the CK4400 Series, also 1-3/8 inch to 1-3/4 inch. All three hold the same passage function and door thickness range as the Callan Carlyle knobset at a higher BHMA grade.
17) I want a hall and closet knob that matches an existing Kwikset keyway across the house - what pairs with it?
The Kwikset 200P Polo passage door knob is an interior hall and closet lock supplied with a 6AL latch and RCS round corner strike, and the 200P-CP comes with a round corner adjustable latch and round corner strike. The Callan Carlyle passage knobset uses a 5 pin KW1 cylinder on its keyed siblings and ships with a round corner latch faceplate, so it sits in the same Kwikset keyway family as the keyed Polo sets such as the 400P-CP Grade 3 keyed entry knob.
18) What is a solid brass passage knob alternative to a zinc set?
The Omnia 434/PA traditional egg-shaped knob latchset is a passage/hall/closet set of solid brass construction with a 3 inch projection. The Callan Carlyle passage knobset is made of zinc with a 2-3/8 inch projection, so the Omnia is the solid brass route where the trim material is being specified, at a deeper projection off the face of the door.
19) Can I use a storeroom knob where a passage knob is called for?
No, they behave differently. The Sargent 6G04 is a Grade 2 storeroom/closet knob lock with a single cylinder and the Sargent 8XG04 is a Grade 1 heavy duty storeroom/closet knob lock with a 2-3/4 inch backset; storeroom sets keep the outside knob locked and require a key to enter. The Callan Carlyle passage knobset is free turning on both sides with no locking function, so a storeroom set changes how the door is used rather than simply substituting for it.
20) I am doing a whole house and need entry and passage knobs that look alike - what covers both?
The Schlage Residential F500 Plymouth with Georgian knob combo pack ships with adjustable backsets and dual strikes for doors 1-3/8 inch to 1-3/4 inch, giving matched functions in one pack. Within the Delaney line the Belton, Galway and Olivia are Grade 3 entrance knobsets, matching the Grade 3 of the Callan Carlyle passage knobset for keyed openings in the same house.
21) How far does the Callan Carlyle knob stick out from the door face?
Projection is 2-3/8 inches from the door face. That matters where a door swings back against a wall or a cabinet, or where two knobs face each other in a tight corner: allow at least that much clear space plus a hand behind the knob.
22) What is the Carlyle knob made of, and will the screws show?
Zinc construction, and the mounting screws are exposed on the interior rose rather than concealed. If you want a clean rose with no visible fasteners on a feature door, look at a solid brass set such as the Omnia 434/PA passage knob latchset instead.
23) Can one person install the Callan Carlyle knobset, and does the latch come with it?
It is a one-person install: the knobset ships with the latch and its round corner faceplate, and mounts through the standard 2-1/8 inch cross bore without a helper holding the outside knob. Set the backset first at 2-3/8 or 2-3/4 inches to match the hole in the door edge, then fit the latch, then the knobs and screws.
24) Is there a decorative passage knob with a rose trim rather than a plain round trim?
The Baldwin Estate 5011 Colonial passage knob comes with a 5058 rose, and the Baldwin Estate 5000 Baltimore knob passage lock is preconfigured with a 5048 rose, a 2-3/8 inch backset and a full lip strike. The Callan Carlyle passage knobset is a zinc set with a round corner latch faceplate and an adjustable 2-3/8 inch or 2-3/4 inch backset, so the Baldwin sets are the decorative-rose option where the Baldwin 5000 is fixed at 2-3/8 inch.
25) Which Bravura passage knobsets are comparable to a Carlyle hall and closet set?
Bravura offers the Albany with round trim and the Lynchburg with round trim, both Grade 2 passage/hall/closet knobsets, and the Dallas with rectangle trim, a Grade 2 passage knobset in a US4 satin brass finish. The Callan Carlyle passage knobset is Grade 3 in the same passage/hall/closet function and comes in finishes including US15 satin nickel, US10B oil rubbed bronze and US19 black.
26) Is there a keyless combination knob that gives passage function?
The Lockey 3830 is a mechanical keyless combination knob lock with an auto-locking passage function for doors 1 3/16 inch to 2 inch. It differs from the Callan Carlyle passage knobset, which is a mechanical passage set with no locking function at all and no code entry, fitting doors 1-3/8 inch to 1-3/4 inch.
How fast can I get the Callan KE1011 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Callan KE1011 come with a warranty?
Absolutely. The Callan KE1011 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Callan KE1011?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Callan KE1011 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.