Callan Kendall Grade 3 Entranc...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$69.00
$60.50
Callan Callan Kendall Grade 3 Entrance Leverset with Deadbolt Combo CLN-KI3001R

Callan Kendall Grade 3 Entrance Leverset with Deadbolt Combo

(No reviews yet) Write a Review

Model: KI3001R
$69.00
$60.50
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$69.00
$60.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Callan Kendall Grade 3 Entrance Leverset

Keyed Entry (Single Cylinder) Function: Keyed entry (single cylinder) door lever sets are keyed on the exterior with an associated thumb turn on the inside that can quickly and easily lock or unlock the latch mechanism. Single cylinder units are commonly used on a front, side or back entrance but can also be found on interior doors as well, depending on application.

Features:

  • Meets BHMA security grade 3 requirements
  • Made of durable zinc
  • Fully reversible handing for left or right handed applications
  • Designed for an easy one person installation
  • Comes standard with a round corner latch faceplate and 1/2" throw
  • Includes a limited lifetime warranty on mechanical parts and a five year warranty on finish
  • Meets the requirements for the American's with Disabilities Act (ADA)

Specifications:

  • Backset: Adjustable 2-3/8" or 2-3/4"
  • Cross Bore: 2-1/8"
  • Edge Bore: 1"
  • Door Thickness: 1-3/8" to 1-3/4"
  • Handing: Reversible Left or Right
  • Projection: 2"
  • Latch Faceplate: Round Corner
  • Cylinder: 5 Pin KW1
  • Concealed Screws: No
  • Material: Zinc

Technical Specification Download

Manufacturer Resources

Product Specs

Subcategory:
Leversets
Series:
Kendall
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Commercial/Residential:
Residential
Lock Function:
Combo Entrance
Product Type:
Leversets
Grade:
Grade 3
Product Attribute:
Cylindrical Locks
Product Function:
Entrance
Product Category:
Mechanical Locks
Department:
Door Hardware

Callan KI3001R – Frequently Asked Questions

1) Will the Callan Kendall entrance leverset and deadbolt combo fit a 1-3/8 inch door?
Yes. The Kendall keyed entry lever and deadbolt combo covers doors from 1-3/8 to 1-3/4 inches, so it works on both older interior doors and standard exterior doors. Standard prep too: 2-1/8 inch cross bore and a 1 inch edge bore.
2) Does the Callan Kendall lever work with a 2-3/4 inch backset, or only 2-3/8?
Both. The Kendall ships with an adjustable latch that sets to either 2-3/8 or 2-3/4 inches, which are the two backsets you will find on a bored door, so you do not need to measure before ordering.
3) Is the Callan Kendall keyed entry lever handed, or does one part number cover both left and right doors?
One part covers both. The Kendall lever is fully reversible for left or right hand doors, so a property manager can stock a single item for a building rather than splitting the order by swing.
4) What keyway does the Callan Kendall come in, and can I get it keyed alike with the rest of my doors?
Two keyways are offered on the Kendall: KW1 5-pin and SC1 5-pin, both 5 pin cylinders. Keying is specified at order as keyed different or keyed alike, so a landlord replacing several units can put the whole set on one key. Pick the keyway that matches the keys already in circulation on the property.
5) Will the Callan Kendall latch drop into my existing strike?
The Kendall uses a 1/2 inch throw latch with a round corner faceplate. If the door already has a round corner latch prep and the frame strike is set for a 1/2 inch throw, it drops straight in. A square corner mortise in the door edge would need the prep changed or the faceplate swapped.
6) What keyed lever should be used instead of the Callan Kendall on a commercial opening that needs a higher ANSI grade?
Step up to a Grade 2 or Grade 1 keyed lever. The Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever handle and a 1-3/8 inch to 2 inch door thickness range. The Falcon B511CP6D is a Grade 2 medium duty cylindrical lever with an entry/office function. For Grade 1, the Dexter C1000 entry/office lever is a clutching keyed lock rated Grade 1 for doors 1-3/8 inch to 1-3/4 inch. The Kendall itself is a Grade 3 residential lock.
7) What is the closest cross-brand equivalent to the Callan Kendall Grade 3 keyed entrance leverset?
The Master Lock BC Series RL01 is the nearest match in the group: it is a Grade 3 keyed entry lever lockset with a return style lever, the same Grade 3 rating and entrance function the Kendall carries. The Cal-Royal AUS00 is also Grade 3 with an entrance/office function and a 1-3/8 inch to 1-3/4 inch door thickness range, matching the Kendall's 1-3/8 inch to 1-3/4 inch range. The difference to weigh is the AUS00 uses a solid brass forged body where the Kendall is zinc.
8) Which keyed lever fits a door thicker than 1-3/4 inches, since the Callan Kendall stops there?
The Kendall covers 1-3/8 inch to 1-3/4 inch doors. For thicker stock, the Deltana 6201 Manchester, 6411 Morant and 6431 Linstead entry levers each cover 1-3/8 inch to 2 inch doors. The Hager 2525 Grade 2 entry lock also spans 1-3/8 inch to 2 inch. Confirm the cross bore and backset on the door before ordering, since these are different platforms rather than a trim swap.
9) Which alternative to the Callan Kendall works if the building keys on a Schlage keyway?
The Kendall can be ordered with an SC1 5-pin keyway as well as KW1 5-pin standard, so it can key into a Schlage-keyed building directly. If a higher grade is wanted on the same keyway, the Cal-Royal AG00 entrance lever uses a 6-pin Schlage C keyway keyed different with a 2-3/8 inch backset for doors 1-3/8 inch to 1-3/4 inch. The Kendall uses an adjustable 2-3/8 inch or 2-3/4 inch backset, so it drops into either bore spacing.
10) What is the difference between a keyed entry lever with a deadbolt and a plain entry lever?
The Kendall combo pairs a keyed entry lever with a deadbolt, so you get a latch for everyday use plus a separate bolt for real security on an exterior opening. The lever alone is keyed outside with a thumbturn inside. If the door only needs to close and latch without locking, a passage set like the Kwikset 200BRNL Breton is the right type instead, and for a bath or bedroom a privacy set such as the Kwikset 300BRNL Breton.
11) Does the Callan Kendall lever meet ADA requirements?
Yes, the Kendall lever meets the requirements of the Americans with Disabilities Act, which is why a lever rather than a knob is specified on accessible units and common-area doors.
12) Is there a simpler non-keyed lever to pair with the Callan Kendall on interior doors of the same job?
Yes. For interior doors that only need to latch, the Kwikset 200BRNL RDT Breton passage lever is Grade 3 for doors 1-3/8 inch to 1-3/4 inch, the same door thickness range the Kendall covers. For bed and bath doors, the Kwikset 300BRNL RDT Breton privacy lever is Grade 3 over the same 1-3/8 inch to 1-3/4 inch range. Both are non-keyed, so no keyway or keying selection is involved, where the Kendall is keyed and takes a KW1 or SC1 5-pin cylinder.
13) What locks like a Callan Kendall entrance leverset but is not a substitute for it?
Several levers in the same size family are not keyed entry locks. The Falcon B101 and Falcon K101 are passage locks, which latch but never lock. The Arrow MK02-TA is a privacy lock for bed and bath. The Cal-Royal AG05 is a storeroom lever with a deadlocking latchbolt, which stays locked from the outside with no thumb turn to leave it unlocked. The Baldwin Estate 5103 half dummy levers do not latch at all. The Kendall is a keyed entry combo with a deadbolt and an inside thumb turn that unlocks the latch.
14) What keyless option replaces a Callan Kendall keyed entrance leverset when keys are the problem in a rental?
For openings where handing out keys is the issue, the Delaney LP250 is a Grade 2 electronic keypad leverlock, and the Lockey 2835 is a mechanical pushbutton keyless lever with passage function and ADA compliance for doors 1 3/16 inch to 2 inch. The Lockey 1150 mechanical keypad lever set has an adjustable backset and covers 1-1/8 inch to 2 inch doors. The trade is that the Kendall is a keyed entry set taking a KW1 or SC1 5-pin cylinder, so it can be keyed alike into an existing key system while a keypad lock cannot.
15) What should be used instead of a Callan Kendall on a school or institutional door that needs classroom or storeroom control?
Those functions call for a different lock. The Dexter C1000 classroom lever is a Grade 1 clutching keyed lock for doors 1-3/8 inch to 1-3/4 inch, and the Dexter C1000 classroom security version adds the second cylinder for locking from inside. For a stockroom or utility door, the Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt over the same 1-3/8 inch to 1-3/4 inch range, and the Hager 2580 is a Grade 2 storeroom lock with the Withnell lever for doors 1-3/8 inch to 2 inch. The Kendall is a Grade 3 entrance function intended for residential use.
16) How does the Callan Kendall differ from the Arrow HK11-BB entrance lock?
Both are entrance function locks covering 1-3/8 inch to 1-3/4 inch doors, and the Arrow HK11-BB uses a conventional cylinder with a turn-pushbutton. The visible difference is trim: the HK11-BB is a ball knob, while the Kendall is a lever set with fully reversible handing and meets ADA requirements. On openings where an ADA-compliant lever is required, the knob is not an equal swap.
17) What finishes does the Callan Kendall entrance lever and deadbolt combo come in?
Two: US15 Satin Nickel and US10BE Edged Bronze. If you are matching hinges and other trim across a building, those are the two colorways to work from.
18) How far does the Callan Kendall lever stick out from the door face?
Projection is 2 inches off the door face. Worth checking where a door swings back against a wall or where a second door or a bath vanity sits close to the opening.
19) What is the Callan Kendall leverset made of, and are the screws exposed?
The Kendall is zinc, and the mounting screws are exposed rather than concealed on the rose. If a job spec calls for concealed fasteners on the interior side, this one will not meet it.
20) Can one person install the Callan Kendall lever, or does it take two?
One. The Kendall is built for single-person installation on a standard bored door, 2-1/8 inch cross bore and 1 inch edge bore, with the latch adjusting to 2-3/8 or 2-3/4 inch backset on the door.
How fast can I get the Callan KI3001R delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Callan KI3001R come with a warranty?
Absolutely. The Callan KI3001R is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Callan KI3001R?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Callan KI3001R from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!