Camden SureWave CM-332 Series ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$304.00
$263.65

Camden SureWave CM-332 Series 2 Relay /44 Hand Icon/Wheelchair Symbol Faceplate Touchless Switch

(No reviews yet) Write a Review

Model: CM-332/44S
From the CM-332 Series Collection
$304.00
$263.65
Selected Finish is
Selected Tri-Color Light Ring is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$304.00
$263.65
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SUREWAVE CM-332 SERIES HAND ICON/WHEELCHAIR SYMBOL FACEPLATE TOUCHLESS SWITCH

CM-332 touchless switches provide ‘state of the art’ door activation and control while eliminating the spread of germs.

These line powered touchless switches offer an adjustable operating range, selectable motion sensing and relay operating modes, hold open timer(s), REX and door position inputs, and the option for a light ring and wireless transmitter.

SPECIFICATIONS

  • Finish options
    • Black - CM-332/44N, CM-332/44W
    • Stainless Steel - CM-332/44S, CM-332/44S-SGLR, CM-332/44SW, CM-332/44SW-SGLR
  • Light Ring
    • Plug-in light ring for single gang, double gang, and 6" round stainless steel faceplates
    • Red/Green /Blue controlled by switch or remotely
  • Mounting Plate Size Options
    • Single Gang - CM-332/44S, CM-332/44S-SGLR
    • /N - Narrow - CM-332/44N
    • /W - Double Gang - CM-332/44SW, CM-332/44SW-SGLR, CM-332/44W

Product Specs

Series:
CM-332
Contact Rating:
3 Amps @ 30 V
Relay Action:
Multi Function
Relay Operating Modes:
Event, Toggle
Inputs:
REX, DPS
Warranty:
3 Year Limited
Wireless Communication:
Yes
Subcategory:
Hands Free Switches
Sensor:
Active Infrared Air
Number of Relays:
2
Application:
Indoor
Commercial/Residential:
Commercial
Product Type:
Hands Free Switches
Power:
40 mA
Fail-safe / Fail-secure:
Field Selectable
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Voltage:
12VAC/DC/24VDC/24VAC
Product Length:
5.25"
Product Height:
2"
Product Category:
Electronic Access Control
Product Weight:
0.4
Product Width:
5.5"
Collection:
CM-332 Series
Department:
Door Hardware

Camden Door Controls CM-332/44S – Frequently Asked Questions

1) What voltage does the Camden SureWave CM-332 touchless switch run on, and can I power it off my existing door operator?
The CM-332 is line powered and accepts 12VAC/DC, 24VDC or 24VAC, so it can be fed from the accessory power output on most low voltage operators or access control power supplies. Current draw is 40 mA, which is light enough that it rarely upsets an existing power budget. Its relay contacts are rated 3 amps at 30 V.
2) Why would I choose the 2 relay CM-332 instead of a single relay touchless switch?
Two relays let one wave do two jobs at once, which is the usual reason to spec it: one relay releases the electric strike or mag lock while the second triggers the automatic operator, or one drives the door and the other signals the access control panel. The relays are multi function with Event and Toggle operating modes, so each can be set for a momentary pulse or a latching on/off action. If you only need a single dry contact to fire an operator, a one relay switch covers it.
3) Will the CM-332 touchless switch fit a standard single gang electrical box?
Yes. The /44 faceplate comes in single gang, narrow, and double gang sizes, so you can match whatever back box is already in the wall. Pick narrow when you are mounting on a door jamb or a mullion that will not take a full single gang plate, and double gang where an existing two gang box is being reused.
4) Can the Camden CM-332 be mounted outside at an exterior entrance?
No. The CM-332 is rated for indoor commercial use only. For a weather exposed push side actuator you need an outdoor rated wave switch or a sealed push plate instead.
5) Does the CM-332 have the wheelchair symbol required for a barrier free entrance?
The /44 faceplate is printed with both a hand icon and the wheelchair symbol, which is the marking barrier free door actuators are normally specified with. Pairing it with the tri-color light ring gives a visual cue that the wave was registered.
6) What does the tri-color light ring option on the CM-332 actually do?
The plug-in light ring illuminates red, green or blue and can be driven by the switch itself or remotely from the access control side, so it can show locked/unlocked status rather than just activation. It is available for single gang, double gang and 6 inch round stainless faceplates. Choose it at time of order; every faceplate size and both finishes are offered with or without it.
7) Can I wire a request to exit device and a door position switch into the CM-332?
Both inputs are on board. The CM-332 accepts REX and DPS connections, so a second exit device can trigger the same relay output and the door contact can tell the switch when the door has closed. That lets the hold open timer reset on door position instead of running the full time out on every activation.
8) Is the CM-332 fail safe or fail secure when power drops?
Field selectable. You set the relay for fail safe or fail secure operation at install, which means the same switch works on a fail safe mag lock opening and on a fail secure electric strike opening without ordering a different part.
9) How does the CM-332 sense a hand, and can I change how close you have to get?
It uses an active infrared sensor that reads a hand in the air in front of the plate, with no contact required. The operating range is adjustable, and motion sensing can be selected, so you can tighten the range in a tight corridor where passing traffic would otherwise cause false activations or open it up at a busy accessible entrance.
10) Is there a wireless version of the Camden CM-332 so I don't have to run wire across the opening?
A wireless transmitter is offered as an option on the CM-332, which removes the run back to the operator or controller. The switch itself still needs its 12VAC/DC or 24VAC/DC supply at the box, so plan a local power feed even when you go wireless on the signal side.
11) What finishes does the CM-332 /44 faceplate come in for matching the rest of my hardware?
Two finishes: black and stainless steel. Stainless is offered across single gang, narrow and double gang sizes; black is available in all three sizes as well, with or without the light ring.
How fast can I get the Camden Door Controls CM-332/44S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Camden Door Controls CM-332/44S come with a warranty?
Absolutely. The Camden Door Controls CM-332/44S is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Camden Door Controls CM-332/44S?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Camden Door Controls CM-332/44S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.