Cantex PVC FSC 1-Gang Device B...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$18.59
Cantex PVC FSC 1-Gang Device Box

Cantex PVC FSC 1-Gang Device Box

(No reviews yet) Write a Review

Model: 5133463

In Stock (leaves warehouse same day if ordered before 3pm ET)

$18.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Cantex PVC FSC 1-Gang Device Box

The Cantex PVC FSC 1-Gang Device Box is a fabricated single-gang PVC device box designed for use in non-metallic conduit systems where a durable, corrosion-resistant enclosure is required for wiring devices. Built from rigid PVC, this 1-gang box is available in hub sizes ranging from 1/2" through 3/4", making it a straightforward fit for standard residential, commercial, and light industrial installations that rely on PVC conduit runs. As a non-metallic alternative to steel or malleable iron boxes, this Cantex FSC device box resists corrosion, rust, and the effects of moisture exposure, which makes it a practical choice for both above-ground and underground PVC conduit applications where long-term durability matters. Whether your rough-in calls for a 1/2" hub or a 3/4" hub connection, the same rugged PVC construction and 1-gang configuration carry through the entire size range, giving contractors a consistent, code-familiar enclosure for switches and receptacles across a PVC conduit system.

Key Features

  • Trade Size Range: Available in 1/2" and 3/4" hub sizes for direct connection to matching PVC conduit runs.
  • Configuration: 1-gang design accommodates a single wiring device, such as a switch or receptacle.
  • Durable Construction: Fabricated from rigid PVC for corrosion resistance and long service life in a variety of installation environments.
  • Non-Metallic Design: PVC construction eliminates the risk of rust and corrosion common to metal boxes, particularly valuable in damp or below-grade conduit systems.
  • Lightweight and Easy to Handle: PVC material is lighter than metal alternatives, simplifying transport and installation on the job site.
  • Compatible with PVC Conduit Systems: Designed to integrate seamlessly with Schedule 40 and Schedule 80 PVC conduit and fittings commonly used in electrical rough-in work.

Technical Specifications

  • Trade Size: 1/2" - 3/4"
  • Configuration: 1-Gang
  • Material: PVC
  • Product Type: FSC Device Box

Typical Applications

  • PVC Conduit and Raceway Systems
  • Single-Gang Switch and Receptacle Installations
  • Residential and Commercial Electrical Rough-In
  • Underground and Below-Grade PVC Conduit Runs
  • New Construction and Renovation Wiring Projects

Why Cantex?

Cantex is a recognized manufacturer of PVC conduit and related fittings built for the demands of professional electrical installation. This FSC 1-gang device box reflects that same commitment to durable, corrosion-resistant PVC construction, giving contractors and electricians a reliable, non-metallic option for single-gang device installations across the 1/2" and 3/4" hub sizes offered. Choosing Cantex PVC products helps ensure consistent compatibility across your PVC conduit system from the raceway to the device box.

Manufacturer Resources

Product Specs

Product Type:
FSC Device Box
Configuration:
1-Gang
Department:
Electrical
Product Subgroup:
Electrical Boxes
list_batch:
CAN-20260924
Product Material:
PVC
Product Size:
1/2"
Product Size:
3/4"
Trade Size:
1/2" - 3/4"
Product Group:
Boxes & Enclosures

Cantex 5133463 – Frequently Asked Questions

1) What hub sizes does the Cantex PVC FSC 1-gang device box come in?
Two hub sizes, 1/2 inch and 3/4 inch. The 3/4 inch box is MPN PVCFSC34. Pick the hub that matches the trade size of the PVC conduit you are running into the box, since the hub is sized for direct connection to that conduit rather than to a separate connector.
2) Will a Cantex FSC box connect to Schedule 40 and Schedule 80 PVC conduit?
Yes. The FSC box is built to integrate with Schedule 40 and Schedule 80 PVC conduit and fittings in the matching trade size, 1/2 inch or 3/4 inch. Because both schedules share the same outside diameter at a given trade size, one hub takes either.
3) Can I use a PVC FSC box for an outdoor or below-grade conduit run?
That is one of its intended uses. Rigid PVC does not rust or corrode, so the box holds up in damp locations and on underground or below-grade PVC conduit runs where a steel or malleable iron box would eventually fail. For a wet location you still need the matching weatherproof cover and gasket; the box is sold as the enclosure only.
4) How many devices will a 1-gang FSC box hold?
One. The 1-gang configuration takes a single wiring device, a switch or a receptacle. If the opening calls for a switch and a receptacle side by side, you need a 2-gang FS/FSC body instead.
5) What is the difference between an FSC box and an FS box?
Both are device bodies for threaded conduit systems. FSC is the through-feed version: it has hubs on opposite ends so conduit can enter one side and continue out the other, which is what you want mid-run. An FS body is the dead-end version, with a single hub for terminating a run. For a switch or receptacle in the middle of a continuous PVC raceway, the FSC is the body to order.
6) Does the Cantex FSC device box come with a cover?
No. What ships is the PVC box body in the 1/2 inch or 3/4 inch hub size. Covers, gaskets and the device itself are separate line items, so add a single-gang PVC cover (blank, switch or duplex, depending on what goes in it) to the same order.
7) Is a PVC device box lighter than a cast metal FS box for overhead work?
Yes, noticeably. PVC weighs less than steel or malleable iron, which matters when you are hanging a long run of bodies overhead or carrying a box of them up a ladder. The trade-off is that PVC is not a grounding path, so a non-metallic system needs an equipment grounding conductor pulled through the raceway.
8) I am standardizing the device boxes across a property on PVC conduit. Does the Cantex FSC come the same in both sizes?
Same box, same rigid PVC construction, same 1-gang configuration across both the 1/2 inch and 3/4 inch hub versions. Only the hub size changes, so covers and devices stay common across the building and your crews see one part on every opening.
How fast can I get the Cantex 5133463 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Cantex 5133463 come with a warranty?
Absolutely. The Cantex 5133463 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Cantex 5133463?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Cantex 5133463 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!