Cantex

Cantex 5133646 PVC LL Conduit Body, 3" Schedule 40 FittingThe Cantex 5133646 is a 3" PVC LL-type conduit body, engineered as part of the Cantex PVCLL series of Schedule 40 PVC conduit fittings used...

Cantex PVCE12530DEG 1-1/4" PVC 30° ElbowThe Cantex PVCE12530DEG is a 1-1/4" PVC 30° elbow designed to change the direction of a conduit run by 30 degrees while maintaining a smooth,...

Cantex 5133841 PVC 90 Degree Elbow, 5 Inch Trade Size, 36 Inch RadiusThe Cantex 5133841 is a 5 inch PVC 90 degree elbow with a 36 inch radius, engineered for use in underground and above-ground...

Cantex 5315260 3" PVC Plug FittingThe Cantex 5315260 is a 3" PVC plug fitting engineered to cap and seal unused conduit openings in electrical raceway systems. Manufactured from rigid PVC, this plug...

Cantex 5121057 1-1/2" Schedule 80 PVC 90° Elbow, Electrical Conduit FittingThe Cantex 5121057 is a 1-1/2" Schedule 80 PVC 90° elbow engineered for electrical conduit systems that demand...

Cantex 5121008 Schedule 80 PVC 45° Elbow, 2"The Cantex 5121008 is a Schedule 80 PVC 45° elbow sized for 2" conduit runs, engineered to provide a durable, corrosion-resistant direction...

Cantex 4" PVC Service Entrance Head, Weatherproof Conduit FittingThe Cantex 4" PVC Service Entrance Head is a purpose-built weatherhead designed to terminate rigid PVC conduit runs at the point where...

Cantex 5133568 2" PVC T-Body Condulet Conduit FittingThe Cantex 5133568 is a 2" PVC T-shaped condulet conduit body designed to provide access points within rigid non-metallic conduit runs for...

Cantex 5133816 6-Inch Schedule 40 PVC 90° ElbowThe Cantex 5133816 is a 6-Inch Schedule 40 PVC 90° elbow (UL40 bend) engineered for use in underground and above-ground non-metallic conduit...

Cantex PVC Schedule 40 Expansion Coupling for Rigid ConduitThe Cantex PVC Schedule 40 Expansion Coupling is engineered to accommodate axial movement in rigid PVC conduit runs caused by thermal...

Cantex Non-Metallic PVC Meter Offset FittingThe Cantex Non-Metallic PVC Meter Offset Fitting is a rigid PVC electrical fitting engineered to route conduit runs out and around a meter base or panel...

Cantex PVC FSC 1-Gang Device BoxThe Cantex PVC FSC 1-Gang Device Box is a fabricated single-gang PVC device box designed for use in non-metallic conduit systems where a durable, corrosion-resistant...

Cantex PVC Junction Box, Non-Metallic Conduit EnclosureThe Cantex PVC Junction Box is a durable, non-metallic enclosure engineered for splicing, pulling, and protecting electrical conductors in...

"Cantex Non-Conductive PVC Two-Hole Conduit StrapThe Cantex PVC Two-Hole Conduit Strap is engineered to secure rigid PVC conduit runs to walls, ceilings, and structural framing across a range of...

"Cantex E983G Non-Metallic PVC Junction Box FamilyThe Cantex E983G is a family of non-metallic PVC junction boxes engineered to provide durable, corrosion-resistant enclosures for splicing and...

Cantex 51400 Series PVC Female Adapter, Threaded Conduit FittingThe Cantex 51400 Series PVC Female Adapter is a family of conduit fittings engineered to transition rigid PVC conduit runs to threaded...

Cantex EZ20SB EZ Box® 1-Gang Non-Metallic Steel Stud BoxThe Cantex EZ20SB is a 1-Gang non-metallic residential stud box built for straight blade device installations on steel stud framing...

Cantex EZ20CN Polycarbonate Residential Ceiling Box, 4-Inch x 2.3-InchThe Cantex EZ20CN is a non-metallic residential ceiling box built from durable polycarbonate, engineered for reliable...

Cantex EZ06DXA Cold-Weather PVC Cement, PintThe Cantex EZ06DXA Cold-Weather PVC Cement is a pint-sized solvent cement formulated for bonding PVC conduit and fittings in low-temperature job-site...

Cantex E950JH PVC Reducer Fitting, 2" x 1-1/2"The Cantex E950JH is a PVC reducer fitting sized 2" x 1-1/2", engineered to transition between conduit runs of differing trade sizes within a single...