You may also like
Manufacturer Resources
Product Specs
- Approval Marks:
- CSA certificate
- Automatic Restart:
- Yes
- Ballast Factor Nom :
- 0.88
- Ballast Type:
- Electronic Fluorescent
- Base Model:
- ICN2P60N
- Color Input Terminals:
- No terminals
- Color Output Terminals:
- No terminals
- Connector Type:
- No connector
- Crestfactor Nom :
- 1.6
- Ean Upc Product:
- 7.81087E+11
- Emc Immunity Standard:
- FCC Non-Consumer
- Housing Dimensions:
- 9.5" x 1.3" x 1.0"
- Housing Material:
- Metal
- Housing Type:
- N
- Hum And Noise Level:
- A
- Ignition Method:
- Instant Start
- Ignition Time Nom :
- 0.1 s
- Input Current Max :
- 1.13 A
- Input Current Min :
- 0.48 A
- Input Frequency:
- 50 to 60 Hz
- Input Power Nom :
- 135-132 W
- Input Voltage:
- 120 to 277 V
- Lamp Connection:
- Parallel
- Lamp Type:
- F96T12
- Material Nr 12nc :
- 9.13701E+11
- Max Ballast Lamp Distance Remote Wiring:
- 20'
- Max Ballast Lamp Distance Tandem Wiring:
- Any = 20'
- Max Ballast Lamp Distance Through Wiring:
- Any = 20'
- Net Weight Piece :
- 350.000 g
- Number Of Lamps:
- 1/2 piece/unit
- Numerator Packs Per Outer Box:
- 10
- Numerator Quantity Per Pack:
- 1
- Order Code:
- 9.13701E+11
- Order Product Name:
- CENTIUM ICN2P60N35I
- Power Factor Nom :
- 0.99
- Rated Lamp Power:
- 75 W
- Remote Wiring Configuration Allowed:
- Yes
- Suitable For Outdoor Use:
- Yes
- T Case Maximum Nom :
- 70 °C
- Tandem Wiring Configuration Allowed:
- Yes
- Through Wiring Configuration Allowed:
- Yes
- Total Harmonic Distortion Usa:
- 10%
- Ul Recognized:
- No
- Wire Gauge Nom :
- 18AWG mm
- Wire Length By Color:
- See data sheet
- Wire Striplength:
- 0.50/0.375 mm
- Wire Type:
- Solid
Philips Lighting 9.13701E+11 – Frequently Asked Questions
1) What lamps does the Philips CENTIUM ICN2P60N35I ballast run?
It runs F96T12 lamps rated at 75 W each, one or two lamps per ballast. Lamps are wired in parallel, so if one lamp fails the other keeps burning. If your fixture has 8-foot T8 or T12HO lamps instead, this is not the right ballast.
2) Will this Philips CENTIUM 8-foot ballast work on 120V and 277V?
Yes. The ICN2P60N35I is a universal-voltage ballast, 120 to 277 V at 50 to 60 Hz, so the same part covers 120 V residential/light commercial panels and 277 V commercial lighting circuits. Input current runs 0.48 A minimum to 1.13 A maximum depending on voltage and lamp count, and nominal input power is 132-135 W on a two-lamp load.
3) Will this ballast fit inside my existing 8-foot strip fixture channel?
The metal housing measures 9.5 x 1.3 x 1.0 inches, which is the standard small-can electronic ballast footprint that drops into most 8-foot strip and industrial channels. It ships with no input or output terminals and no connector, so it is a flying-lead ballast: 18 AWG solid wire that you splice with wire nuts. Piece weight is 350 g.
4) How far can the ballast be from the lamps if I remote-mount it?
Remote mounting is allowed up to 20 feet between ballast and lamp. Tandem and through-wiring configurations are both permitted as well, each with the same 20-foot limit on any lead. That lets one ballast feed lamps in an adjacent fixture in a row of channels.
5) Can I use this Philips ballast in an outdoor or unheated sign and canopy fixture?
It is rated suitable for outdoor use, and it restarts automatically after a lamp is replaced or power is cycled. Keep the case at or below 70 C max at the case temperature point, which is what governs whether it survives a tight enclosure or a hot canopy.
6) Is this an instant start or rapid start ballast, and does that matter for my application?
Instant start, with a nominal 0.1 second ignition time. Instant start draws the least input power and is the usual choice for spaces where lights run long hours and are not switched frequently. In a space on occupancy sensors that cycles the lights many times a day, a programmed or rapid start ballast gives longer lamp life.
7) Is the power quality good enough for a commercial building with harmonic limits?
Power factor is 0.99 nominal and total harmonic distortion is 10 percent, which meets the under-20-percent THD threshold commonly specified for commercial and institutional lighting. Crest factor is 1.6, and the sound rating is Class A, the quietest grade, so it is suitable for offices, classrooms, and libraries.
8) What approvals does this Philips electronic fluorescent ballast carry?
It holds a CSA certificate and meets the FCC Non-Consumer EMC immunity standard, which is the commercial/industrial FCC class rather than the tighter residential one. That EMC class is worth noting if the fixtures go into a residential building where radio interference is a concern.
9) How does the CENTIUM ICN2P60N35I ship, and how many come in a case?
Each pack holds one ballast, and an outer box holds 10 packs, so a full case is 10 ballasts. Order code and product name on the box read CENTIUM ICN2P60N35I under Philips material number 913701261901. Useful if you are standardizing a warehouse or parking structure relamp and buying by the case.
10) What wire strip length should I use when splicing this ballast in?
Strip the 18 AWG solid leads to the 0.50/0.375 mm specification given for the ballast. Because it comes with no input or output terminals, every connection is a field splice, so plan on wire nuts or push-in connectors for both the line side and each lamp lead.
How fast can I get the Philips Lighting 9.13701E+11 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Philips Lighting 9.13701E+11 come with a warranty?
Absolutely. The Philips Lighting 9.13701E+11 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Philips Lighting 9.13701E+11?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Philips Lighting 9.13701E+11 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.