Chicago® Grip for Bare Copper Wire
1613-35 - spec sheet
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Always match proper size and type of grip to application.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Features
- Made in USA
- Pulls #6 to #8 AWG bare copper wire with max safe load of 4500-Pound (2100 kg)
- Hot latch version available (Cat. No. 1613-35H)
- Single V groove jaw contour
- Locking loop handles allow the jaws to be held in an open position for easy placement on wire or cable
1613-35 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.1285" to 0.162" (3.3 to 4.06 mm)
- Cable Type:
- Copper, ACSR
- Depth:
- 7.6500 in
- Height:
- 1.8000 in
- Hot Latch:
- No
- Jaw Length:
- 4.188" (10.6 cm)
- Jaw Type:
- Single V
- Locking Handle:
- Yes
- Maximum Safe Load:
- 4500 lb (2041 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 2.9400 lbs
- Width:
- 4.0500 in