You may also like
Klein Tools 1613-35 Chicago® Grip for Bare Copper Wire
Model: KLN-1613-35
Chicago® Grip for Bare Copper Wire
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
When used on/near energized lines, ground, insulate, or isolate grip before...
Klein Tools
$398.89
$348.89
Klein Tools 1656-30 Chicago® Grip for Bare Wire 0.31 to 0.53-Inch
Model: KLN-1656-30
Chicago® Grip for Bare Wire 0.31 to 0.53-Inch
Warnings
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Always match proper size and type of grip to...
Klein Tools
$430.23
$380.23
Klein Tools 1613-40H Chicago® Grip with Latch 0.37-Inch Cable
Model: KLN-1613-40H
Chicago® Grip with Latch 0.37-Inch Cable
Features
For larger conductors, see our grips with round inside-jaw contour
Sawtooth profile provides extra gripping power
Double V grooves give four-point...
Klein Tools
$457.13
$407.13
Klein Tools 1656-60 Chicago® Grip for Bare Wire 0.8 to 0.9-Inch
Model: KLN-1656-60
Chicago® Grip for Bare Wire 0.8 to 0.9-Inch
Warnings
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Before each use, clean jaw...
Klein Tools
$806.93
$756.93
Klein Tools 1656-40 Chicago® Grip for Bare Wire 0.5 to 0.7-Inch
Model: KLN-1656-40
Chicago® Grip for Bare Wire 0.5 to 0.7-Inch
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
When used on/near energized lines, ground, insulate, or isolate...
Klein Tools
$719.76
$669.76
Chicago® Grip for Bare Wire
1613-30 - spec sheet
Warnings
- Always match proper size and type of grip to application.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Features
- Made in USA
- Works within 0.08 to 0.20-Inch (2.0 to 5.1 mm) cable diameter range
- Max Safe Load of 1500-Pound (680 kg)
- Lightweight, cost-effective grip for solid and stranded #8 AWG to #6 AWG bare copper wire
- Single ''V'' groove jaw with 3-Inch jaw length
1613-30 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.08" to 0.2" (2.03 to 5.08 mm)
- Cable Type:
- Copper, ACSR, Steel
- Depth:
- 4.5000 in
- Height:
- 1.4670 in
- Hot Latch:
- No
- Jaw Length:
- 3" (7.6 cm)
- Jaw Type:
- Single V
- Locking Handle:
- Yes
- Maximum Safe Load:
- 1500 lb (680 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 1.4580 lbs
- Width:
- 4.5000 in