You may also like
Klein Tools 1656-30H Chicago® Grip with Latch 0.53-Inch Capacity
Model: KLN-1656-30H
Chicago® Grip with Latch 0.53-Inch Capacity
Features
When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example - S1684-5H)
When stick is removed, latch...
Klein Tools
$506.20
$456.20
Klein Tools 1656-50H Chicago® Grip with Latch 0.86-Inch Capacity
Model: KLN-1656-50H
Chicago® Grip with Latch 0.86-Inch Capacity
Features
Made in USA
When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example - S1684-5H)
When stick is...
Klein Tools
$856.57
$806.57
Klein Tools 1656-40H Chicago® Grip with Latch 0.74-Inch Capacity
Model: KLN-1656-40H
Chicago® Grip with Latch 0.74-Inch Capacity
Features
When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire
Made in USA
Hot-line grips for both...
Klein Tools
$815.67
$765.67
Klein Tools 1656-20H Chicago Grip w/Latch, Bare Conductors to 0.4-Inch
Model: KLN-1656-20H
Chicago Grip w/Latch, Bare Conductors to 0.4-Inch
Warnings
Always match proper size and type of grip to application.
When used on/near energized lines, ground, insulate, or isolate grip before...
Klein Tools
$445.49
$395.49
Klein Tools 1656-30 Chicago® Grip for Bare Wire 0.31 to 0.53-Inch
Model: KLN-1656-30
Chicago® Grip for Bare Wire 0.31 to 0.53-Inch
Warnings
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Always match proper size and type of grip to...
Klein Tools
$430.23
$380.23
Chicago® Grip with Latch 0.96-Inch Capacity
1656-60H - spec sheet
Warnings
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Always match proper size and type of grip to application.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Features
- When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example - S1684-5H)
- Standard hot-line grips are not supplied with springs or lock-open features
- Made in USA
- When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire
- Hot-line grips for both bare and insulated conductors
- Grip may be placed on wire with hot-line stick
1656-60H - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.86" to 0.96" (21.84 to 24.38 mm)
- Cable Type:
- ACSR, AAC, Copper
- Depth:
- 12.5000 in
- Height:
- 2.0000 in
- Hot Latch:
- Yes
- Jaw Length:
- 5.5" (14 cm)
- Jaw Type:
- Round
- Locking Handle:
- Yes
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Spring:
- No
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 0.1000 lbs
- Width:
- 7.7500 in