You may also like
Klein Tools 1656-50H Chicago® Grip with Latch 0.86-Inch Capacity
Model: KLN-1656-50H
Chicago® Grip with Latch 0.86-Inch Capacity
Features
Made in USA
When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example - S1684-5H)
When stick is...
Klein Tools
$856.57
$806.57
Klein Tools 1656-40H Chicago® Grip with Latch 0.74-Inch Capacity
Model: KLN-1656-40H
Chicago® Grip with Latch 0.74-Inch Capacity
Features
When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire
Made in USA
Hot-line grips for both...
Klein Tools
$815.67
$765.67
Klein Tools 1656-30H Chicago® Grip with Latch 0.53-Inch Capacity
Model: KLN-1656-30H
Chicago® Grip with Latch 0.53-Inch Capacity
Features
When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example - S1684-5H)
When stick is removed, latch...
Klein Tools
$506.20
$456.20
Klein Tools 1656-60H Chicago® Grip with Latch 0.96-Inch Capacity
Model: KLN-1656-60H
Chicago® Grip with Latch 0.96-Inch Capacity
Warnings
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Grips are to be used for temporary installation, not for...
Klein Tools
$870.59
$820.59
Klein Tools 1656-50 Chicago® Grip for Bare Wire .7 to .8-Inch
Model: KLN-1656-50
Chicago® Grip for Bare Wire .7 to .8-Inch
Features
Made in USA
Manufactured from drop-forged, heat-treated steel for excellent durability
Jaw design helps reduce slippage to make pulling cables...
Klein Tools
$768.20
$718.20
Chicago Grip w/Latch, Bare Conductors to 0.4-Inch
1656-20H - spec sheet
Warnings
- Always match proper size and type of grip to application.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Do not exceed rated capacity.
Features
- Made in USA
- When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire
- Grip may be placed on wire with hot-line stick
- Hot-line grips for both bare and insulated conductors
- Standard hot-line grips are not supplied with springs or lock-open features
- When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example - S1684-5H)
1656-20H - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.2" to 0.4" (5.08 to 10.16 mm)
- Cable Type:
- Copper, ACSR, AAC
- Depth:
- 8.0000 in
- Height:
- 2.2500 in
- Hot Latch:
- Yes
- Jaw Length:
- 4" (10.2 cm)
- Jaw Type:
- Round
- Locking Handle:
- Yes
- Maximum Safe Load:
- 4500 lb (2041 kg)
- Spring:
- No
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 0.1000 lbs
- Width:
- 6.0000 in