Codelock CL2210 Electronic Mor...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$328.38
Codelock CL2210 Electronic Mortise Deadbolt

Codelock CL2210 Electronic Mortise Deadbolt

(No reviews yet) Write a Review

Model: CL2210BS

In Stock (leaves warehouse same day if ordered before 3pm ET)

$328.38
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

CODELOCKS

CL2210 Electronic Mortise Deadbolt

The CL2210 is a medium duty electronic lock. The outside knob turns freely without operating the latchbolt. When a valid code is entered and the blue LED lights burn, the knob will retract the latchbolt. The key will open the door for management functions. Code Free Mode can be programmed at the keypad using the Master Code.

Key Features

  • Mortise deadbolt
  • Rapid retrofit for basic single code mechanical locks
  • On door programming via Master Code in seconds
  • Allows up to 80 User Codes
  • Allows up to 10 One-Time User Codes
  • Over 80,000 operations from 2 x AA cells (supplied)
  • Non handed
  • PVD low maintence finish 
  • Key override as standard 

 

The lock can store up to 80 different User Codes. Codes may be 4, 5 or 6 digits long. Programming is via the keypad, using the Master Code. The lock has fitted as standard two alarm release terminals:

  • REM1 is used to open the lock from a reception desk button or answer phone
  • REM2 can be linked to an alarm system which, when activated by a momentary contact, will release the door for 30 minutes.This allows emergency personnel to enter the room to rapidly check that no one has been trapped and overlooked

Installation Instructions

CL2000 Brochure

Installation Template

Manufacturer Resources

Product Specs

Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Product Type:
Deadbolts
Subcategory:
Mortise Deadbolt Electronic Door Locks
Commercial/Residential:
Commercial
Electronic:
Yes
Lock Type:
Mortise
Lock Function:
Deadbolt
Orientation:
Vertical
Power:
2X AA
Product Attribute:
Electronic Locks
Product Function:
Deadbolt
Product Finish:
Brushed Steel
Latch Type Specification:
Mortise Latchbolt
Product Category:
Electronic Locks
Product Substrate:
Zinc Alloy
Department:
Door Hardware

Codelocks CL2210BS – Frequently Asked Questions

1) Does the Codelocks CL2210 need to be ordered for a left or right hand door?
No handing to specify. The CL2210 electronic mortise deadbolt is non handed, so the same unit works on a left or right hand opening. That makes it simpler for a property manager standardizing across a building with doors swinging both ways.
2) Can I get into a Codelocks CL2210 if the batteries die or someone forgets the code?
Key override comes as standard on the CL2210, so a mechanical key opens the door for management functions. The keypad runs on 2 x AA cells (supplied) and gives over 80,000 operations, so battery replacement is an occasional task rather than a routine one.
3) How many people can I give codes to on a Codelocks CL2210?
Up to 80 User Codes, plus 10 One-Time User Codes for one-off access like a contractor or a viewing. Codes can be 4, 5 or 6 digits, and all programming is done at the keypad using the Master Code, no software or wiring to a panel.
4) Can the CL2210 be released remotely from a reception desk or tied into a fire alarm?
Yes, it ships with two alarm release terminals. REM1 lets a reception desk button or answer phone open the lock. REM2 links to an alarm system, and a momentary contact there releases the door for 30 minutes so emergency personnel can sweep the room. That is the feature that makes it usable in a hotel, care setting or student accommodation.
5) Will the CL2210 replace an existing mechanical push-button code lock?
That is what it is built for. Codelocks lists the CL2210 as a rapid retrofit for basic single code mechanical locks, so if you already have a single-code mechanical keypad on the door the changeover is direct. Codelocks publishes an installation template and installation instructions for the door prep, so check your existing cutout against the template before you pull the old lock.
6) Is the CL2210 a mortise lock or does it fit a bored door prep?
It is a mortise unit with a mortise latchbolt, so the door needs a mortise pocket, not a standard 2-1/8 inch cross bore. If your doors are prepped for a tubular deadbolt instead, a bored product like the Dexter DB2000 single cylinder Grade 2 deadbolt (1-3/8 to 1-3/4 inch doors) fits that prep. Use the Codelocks installation template to confirm the pocket before ordering.
7) What is the closest electronic deadbolt alternative to the Codelocks CL2210?
The CL2210 is a battery powered electronic mortise deadbolt running on 2 x AA cells with keypad code entry and key override. If you want another electronic deadbolt, the Delaney KP400 is a Grade 2 electronic deadbolt with a programmable remote, and the Dormakaba Saffire LX-D is an RFID electronic deadbolt with BLE and electronic lock override. The KP400 and Saffire use different credential methods - remote and RFID card - while the CL2210 is keypad code driven with up to 80 user codes.
8) We need credential-based access for a multifamily building instead of keypad codes - what deadbolt should we look at?
For card-credentialed multifamily openings, the Dormakaba Nova-D is an RFID multihousing smart electronic deadbolt, and the Dormakaba Saffire LX-D is an RFID electronic deadbolt with BLE and electronic lock override. The Codelocks CL2210 is a keypad code lock storing up to 80 user codes plus 10 one-time codes, with key override, so it suits openings where you hand out numbers rather than cards.
9) Is the DynaLock 1300 mortise electric deadbolt an alternative to the Codelocks CL2210?
They solve different problems. The DynaLock 1300 is a heavy duty mortise electric deadbolt, meaning it is released by a wired access control system rather than by anyone at the door. The CL2210 is a standalone battery lock on 2 x AA cells, programmed at the keypad with the Master Code, though it does have REM1 and REM2 terminals so a reception button or alarm system can release it. Choose the 1300 if the bolt must be controlled entirely by the panel and wired power is available.
10) Is the CL2210 heavy duty enough for a commercial entrance door?
It is a medium duty electronic lock rated for commercial use, with a zinc alloy body and a PVD low maintenance finish in brushed steel. For a high-traffic main entrance carrying constant public use, a mechanical Grade 1 deadbolt such as the Design Hardware D1 Series double cylinder is the heavier option. The CL2210 suits interior and secondary commercial doors where coded access matters more than maximum cycle duty.
11) Should I use a keypad deadbolt like the CL2210 or a card-based electronic lock?
The CL2210 is a standalone keypad unit: codes are issued and cancelled at the door with the Master Code, no credentials to buy or distribute. If you need RFID cards or phone access instead, the Dormakaba Saffire LX-D is an RFID electronic deadbolt with BLE and electronic lock override, and the Dormakaba Nova-D is an RFID multihousing smart deadbolt. Keypad suits small portfolios and shared doors; RFID suits properties already running a credential system.
12) Can the CL2210 be left unlocked during business hours?
Yes. Code Free Mode is programmed at the keypad using the Master Code, which lets the knob retract the latchbolt without a code being entered, then you take it back out of Code Free Mode to secure the door again. Useful for an office or clinic door that needs to be open during the day and coded after hours.
13) Does the outside knob on the CL2210 stay locked until a code is entered?
The outside knob spins free and does not move the latchbolt. Enter a valid code, the blue LED lights, and the knob then retracts the latchbolt. A key opens the door for management functions regardless.
14) What is a simpler Grade 1 keyed deadbolt to use where the CL2210's code management is not needed?
Where you only need a key and a turn, Grade 1 keyed options include the Accentra D111 single cylinder deadbolt with a 2-3/8 inch backset for 1-3/8 to 1-3/4 inch doors, the Falcon D111 heavy duty Grade 1 classroom deadbolt with adjustable backset, and the Deltana CL200LM Grade 1 single cylinder deadbolt. The CL2210 adds keypad code entry on 2 x AA cells with key override for management functions.
15) We need a deadbolt that also secures the hinge side or uses multipoint locking - what is the option?
The Detex DX Series is a hinge side locking deadbolt with multipoint security, which addresses openings where the hinge edge is the weak point. The Codelocks CL2210 is a single mortise deadbolt at the lock edge, non handed, with keypad code entry and key override.
16) Can we standardize a facility on interchangeable core keying and still use the CL2210?
The CL2210 uses a key override for management functions alongside its keypad codes, so its keying follows the Codelocks cylinder. If SFIC standardization is the driver, the Arrow E61 Grade 2 single cylinder deadlock ships with SFIC prep less core for 1-3/8 to 1-3/4 inch doors, and the Deltana CL200LAIC is a Grade 2 single deadbolt with a 2-3/4 inch backset prepped for an interchangeable core.
17) What is the difference between the CL2210 and a double cylinder deadbolt like the Callan 210S?
A double cylinder deadbolt is keyed on both faces - the Callan 210S is a Grade 3 double cylinder deadbolt, and the Design Hardware D1 is a Grade 1 extra heavy duty double cylinder deadbolt for 1-3/4 inch doors. The Codelocks CL2210 instead uses a keypad on the outside with a code releasing the bolt and a key override for management, so egress does not depend on carrying a key on the inside face.
18) What deadbolt should we use on an exit-only door where no key is wanted outside?
The Arrow E60 is a Grade 2 exit deadlock, non-keyed, with a blank plate outside and a thumbturn inside for 1-3/8 to 1-3/4 inch doors, and the Callan 205S is a Grade 3 one sided half-bore deadbolt. The Codelocks CL2210 is the opposite case - it carries an outside keypad so authorized people can code in from the exterior.
19) What finish does the Codelocks CL2210 come in?
Brushed steel is the only finish offered, and it is a PVD coating rather than a plated lacquer, so it holds up with little maintenance. If you need a matching aesthetic across a lobby, brushed steel reads close to satin stainless trim on adjacent hardware.
20) Is the Kaba Ilco 4500 a substitute for the Codelocks CL2210?
The Kaba Ilco 4500 Series is a heavy duty professional deadbolt, a mechanical unit, while the CL2210 is an electronic deadbolt with keypad programming for up to 80 user codes and 10 one-time codes on 2 x AA cells. If the reason you are buying is rotating codes for short term occupants, the 4500 will not do that job; if it is a straight keyed bolt, it will.
How fast can I get the Codelocks CL2210BS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Codelocks CL2210BS come with a warranty?
Absolutely. The Codelocks CL2210BS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Codelocks CL2210BS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Codelocks CL2210BS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!