Command Access MLRK1-AR Motori...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$575.00
$347.00
Command Access MLRK1-AR Motorized Latch Retraction Kit for Adams Rite 82/84/86/88 Series with Smart Module Technology

Command Access MLRK1-AR Motorized Latch Retraction Kit for Adams Rite 82/84/86/88 Series with Smart Module Technology

(No reviews yet) Write a Review

Model: MLRK1-AR

In Stock (leaves warehouse same day if ordered before 3pm ET)

$575.00
$347.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Command Access MLRK1-AR Motorized Latch Retraction Kit for Adams Rite 82/84/86/88 Series

Electrification Kit for Adams Rite 8000 Series Exit Devices

The Command Access MLRK1-AR is a motorized latch retraction kit built for retrofitting Adams Rite 8000 series exit devices: models 82, 84, 86, and 88. The kit is field-installable with a single-hole installation and operates on 22-28 VDC. Two energy modes are selectable: standard torque (peak 1.3A, hold 170mA) and high torque (peak 2A, hold 250mA). Wire runs up to 300 ft are supported using standard 18AWG wiring. An optional REX (Request-to-Exit) variant is available for integrated egress sensing.

Features

  • Adams Rite Compatibility: Fits Adams Rite 82, 84, 86, and 88 series exit devices with no clearance conflicts.
  • MM4 Smart Module Technology: Onboard diagnostics with audible feedback for live adjustment and troubleshooting during installation and maintenance.
  • PTS Push-to-Set Technology: Post-installation adjustment completed in approximately 5 seconds with ~1/4 inch onboard control.
  • Dual Energy Mode Operation: Switchable between standard torque (peak 1.3A, hold 170mA) and high torque (peak 2A, hold 250mA) for power optimization.
  • Extended Wire Run: Supports up to 300 ft using standard 18AWG wiring for centralized power supply placement.
  • Continuous Duty Electric Dogging: Auto re-engagement when the push pad is disengaged for high-traffic applications.
  • Field-Installable: Single-hole, non-invasive drop-in installation with door-specific cutdown requirements (see installation guide).
  • 3-Year No Hassle Warranty: Manufacturer-backed coverage.

Technical Specifications

  • Application: Commercial
  • Operating Voltage: 22-28 VDC
  • Current Draw (Standard Torque): Peak 1.3A / Hold 170mA
  • Current Draw (High Torque): Peak 2A / Hold 250mA
  • Max Wire Run: 300 ft (18AWG)
  • Compatible Devices: Adams Rite 82, 84, 86, 88 Series
  • Smart Module: MM4
  • Warranty: 3 Year

Manufacturer Resources

Command Access Catalog

Product Specs

Product Group:
Electronic Access Controls
Series:
MLRK1-AR Series
Product Subgroup:
Parts and Accessories
Subcategory:
Exit Device Trim
Commercial/Residential:
Commercial
Product Type:
Exit Device Trim
Electronic:
Yes
Warranty:
3 Year Warranty
Parts and Accessories Type:
Replacement Parts
Product Attribute:
Parts and Accessories
Tags:
MLRK1-AR, MLRK1-AR-REX, motorized latch retraction, adams rite electrification
Product Voltage:
22 to 28 VDC
Product Category:
Electronic Access Controls
Department:
Door Hardware

Command Access MLRK1-AR – Frequently Asked Questions

1) Will the Command Access MLRK1-AR motorized latch retraction kit fit my Adams Rite exit device?
The MLRK1-AR is built for Adams Rite 8000 series exit devices, specifically the 82, 84, 86 and 88 models. It drops into those devices without clearance conflicts. If your push bar is any other brand or an Adams Rite series outside 82/84/86/88, this is the wrong kit.
2) Do I have to cut down the MLRK1-AR to match my door width?
Yes, the kit is cut to length on site and the amount depends on door width: 1 inch off for a 36 inch door, 7 inches for a 42 inch door, and 5.5 inches for a 48 inch door. Measure the door leaf before you start, because the cutdown is what makes the retraction assembly sit correctly in the push bar.
3) What power supply do I need for a Command Access MLRK1-AR latch retraction kit?
Run it on 22 to 28 VDC. Size the supply to the energy mode you pick: standard mode draws 1.3A peak and holds at 170mA, high torque mode draws 2A peak and holds at 250mA. Inrush is what sizes the supply, so budget for the peak per opening, not the hold current.
4) Should I order the MLRK1-AR with REX or the standard version?
Two versions ship: standard, and with REX (request-to-exit). Take the REX version if your access control panel needs to know when someone pushed the bar, for shunting an alarm or unlocking a mag on the same opening. If the panel only needs to pull the latch on a credential and egress sensing is handled elsewhere, the standard kit is enough. REX is factory-built into the kit, so decide at order time.
5) Can I electrify an existing Adams Rite push bar without replacing the door or the device?
That is what this kit is for. The MLRK1-AR is field installable into an existing Adams Rite 82/84/86/88 device with a single-hole installation and no change to the door structure, so an existing mechanical opening gets motorized latch retraction without pulling the door or buying a new exit device. Practical for retrofits where the doors and frames stay put and only the access control is being added.
6) How far can I run wire from the power supply to the door with the MLRK1-AR?
Up to 300 feet on standard 18AWG. That is long enough to keep the supply in the electrical or access control closet with the panel instead of putting a transformer above every opening, which is usually the reason people specify a motorized kit over a solenoid one.
7) What is the difference between low current and high torque mode on the MLRK1-AR?
The mode is switchable on the kit. Low current draw mode peaks at 1.3A and holds 170mA, which lets you put more openings on one supply. High torque mode peaks at 2A and holds 250mA and gives the motor more pull, which is what you want on a door under stack pressure, a heavy weatherstripped exterior leaf, or a device that binds. Start standard, move to high torque if the latch does not pull cleanly.
8) Can the MLRK1-AR hold the doors unlocked all day for business hours?
Yes. It provides continuous duty electric dogging, so the latch can stay retracted for a scheduled unlock period and re-engages automatically when the push pad is disengaged. That covers the common schedule case: doors free-swinging during open hours, latched on a timer after close.
9) How do you adjust a Command Access latch retraction kit after it is installed?
The MM4 Smart Module handles it. Onboard diagnostics give audible feedback so you can adjust live at the door instead of guessing, and PTS push-to-set takes about 5 seconds using roughly a quarter inch of onboard travel. That matters on a service call, since the adjustment is made with the device on the door rather than by pulling it back off.
10) Is the MLRK1-AR rated for a school, hospital, or other high-traffic commercial building?
It is a commercial-duty electrified kit, rated continuous duty, and Command Access lists it for exactly those uses: education, healthcare, government, retail, industrial and multi-tenant access control retrofits. For a facility standardizing openings, the appeal is that every existing Adams Rite 82/84/86/88 device can be brought onto the access control system with the same kit rather than a mix of replacement devices.
How fast can I get the Command Access MLRK1-AR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Command Access MLRK1-AR come with a warranty?
Absolutely. The Command Access MLRK1-AR is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Command Access MLRK1-AR?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Command Access MLRK1-AR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!