Command Access MLRK1-CAL Motor...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$575.00
$420.67
Command Access Command Access MLRK1-CAL Motorized Latch Retraction Kit for Cal Royal 2200 & 9800 Series Exit Device CAT MLRK1-CAL

Command Access MLRK1-CAL Motorized Latch Retraction Kit for Cal Royal Exit Devices with Smart Module Technology

(No reviews yet) Write a Review

Model: MLRK1-CAL

In Stock (leaves warehouse same day if ordered before 3pm ET)

$575.00
$420.67
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Command Access MLRK1-CAL Motorized Latch Retraction Kit for Cal Royal Exit Devices with Smart Module Technology

Professional Electrification Solution for Cal Royal 2200 & 9800 Series Exit Devices

The Command Access MLRK1-CAL Motorized Latch Retraction Kit provides a practical and cost-effective way to convert mechanical Cal Royal 9800 & 2200 series exit devices to electrified latch retraction devices while maintaining UL listing. This easy-to-install motor-driven kit operates on 24 to 28 VDC with low current draw of 215mA hold current in standard torque mode. The kit features PTS technology allowing for 1/4" electronic adjustment and supports wire runs up to 300' with 18ga wire for flexible installation options.

Professional Features & Benefits

  • Cal Royal Series Compatibility: Specifically designed for Cal Royal 2200 & 9800 series exit devices for seamless integration and maintained UL listing.
  • Smart Module Technology: MM4S Smart Module provides on-board diagnostics with audible feedback for adjustment and power issues with remote accessibility for easy servicing.
  • PTS Electronic Adjustment: 5-second electronic adjustment capability with approximately 1/4" adjustment range for easy post-installation fine-tuning.
  • Dual Torque Operation: Field switchable between standard torque (900mA peak, 215mA hold) and high torque mode (2A peak, 250mA hold) for various application requirements.
  • Extended Wire Run Capability: Supports up to 300' wire runs with 18ga wire allowing centralized power supply placement for installation convenience.
  • Electric Dogging Function: Continuous duty rated electric dogging with auto re-engage if push pad is pulled from dogged position for enhanced security.
  • Quick Connect Installation: 8' cable with Quick Connect for MM4S module enables easy power connection and simplified installation process.
  • Comprehensive Warranty: 3-year "no-hassle" warranty provides added confidence and protection for professional installations.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Electronic: Yes
  • Parts and Accessories Type: Replacement Parts
  • Product Attribute: Parts and Accessories
  • Product Category: Electronic Access Controls
  • Product Group: Electronic Access Controls
  • Product Subgroup: Parts and Accessories
  • Product Type: Exit Device Trim
  • Product Voltage: 24 to 28 VDC
  • Series: MLRK1-CAL Series
  • Subcategory: Exit Device Trim
  • Warranty: 3 Year Warranty

Professional Applications

  • Commercial Building Access Control Upgrades
  • Educational Facility Security Systems
  • Healthcare Institution Access Management
  • Retail Establishment Exit Control
  • Industrial Facility Security Integration
  • Government Building Access Systems
  • Multi-Tenant Property Security

Why Choose Command Access Quality?

Command Access MLRK1-CAL motorized latch retraction kits deliver professional-grade reliability with UL-listed performance and smart module technology for demanding commercial applications. The 3-year "no-hassle" warranty and field-switchable torque modes ensure dependable operation where reliable access control is essential. Engineered for easy installation and post-installation adjustment to meet specific application requirements.

Manufacturer Resources

Command Access Catalog

Product Specs

Product Group:
Electronic Access Controls
Series:
MLRK1-CAL Series
Product Subgroup:
Parts and Accessories
Subcategory:
Exit Device Trim
Commercial/Residential:
Commercial
Product Type:
Exit Device Trim
Electronic:
Yes
Warranty:
3 Year Warranty
Parts and Accessories Type:
Replacement Parts
Product Attribute:
Parts and Accessories
Product Voltage:
24 to 28 VDC
Product Category:
Electronic Access Controls
Department:
Door Hardware

Command Access MLRK1-CAL – Frequently Asked Questions

1) Will the Command Access MLRK1-CAL motorized latch retraction kit fit my Cal Royal exit device?
The MLRK1-CAL kit is built specifically for Cal Royal 2200 and 9800 series exit devices. It converts a mechanical device of those series to electric latch retraction, and the device keeps its UL listing after the conversion. If your device is another Cal Royal series or another brand, this is the wrong kit.
2) What power supply do I need for a Command Access MLRK1-CAL latch retraction kit?
Run it on 24 to 28 VDC. Current draw depends on the torque mode you set: standard torque pulls 900mA peak and 215mA hold, high torque pulls 2A peak and 250mA hold. Size the supply for peak inrush on every door you are driving, not the hold current, and pick the mode before you calculate the load.
3) How far can I run wire from the power supply to the MLRK1-CAL kit?
Up to 300 feet with 18ga wire. That lets you put one centralized power supply in an electrical or IT room and feed doors across a floor instead of mounting a transformer above each opening. The kit also ships with an 8 foot cable and a Quick Connect for the MM4S module, so the door-side connection is plug-in rather than field-terminated.
4) Should I order the MLRK1-CAL with REX or the standard version?
Two versions are sold: standard, and with REX (request-to-exit). Take the REX version when the access control panel or alarm needs a signal that someone pushed the pad from the inside, which is the usual case on a card-reader door or a monitored egress opening. The standard kit gives you motorized retraction and electric dogging with no exit signal back to the panel.
5) Do I have to replace my Cal Royal exit devices to add card reader access control?
No. The MLRK1-CAL is a retrofit kit that electrifies the Cal Royal 2200 or 9800 device already on the door, so a building standardized on those devices can be converted opening by opening instead of buying new electrified exit devices. It is sold as a replacement part for commercial use, motor driven, with the UL listing maintained through the conversion.
6) What happens to a door with an MLRK1-CAL kit when the power goes out?
Motorized latch retraction is a fail-secure arrangement by nature: the motor pulls the latch in on 24 to 28 VDC, and with no power the latch stays projected and the door stays locked from the outside. The push pad still works mechanically, so free egress from the inside is unaffected. Plan for that if the opening is on an access control system that needs to unlock on a power loss.
7) Can I use the MLRK1-CAL for electric dogging during business hours?
Yes, and it is rated continuous duty for it, so you can leave the latch retracted all day on a storefront or school entry and re-secure on a schedule. If someone pulls the push pad while it is dogged, the kit auto re-engages rather than leaving the opening in an unknown state.
8) How do you adjust a Command Access MLRK1-CAL after it is installed on the door?
There is a 5 second electronic adjustment (PTS) with roughly 1/4 inch of range, so minor latch travel corrections are made electronically instead of pulling the device back off the door. The MM4S smart module adds on-board diagnostics with audible feedback for adjustment and power problems, and it is remotely accessible for servicing. That matters on a large site where a tech would otherwise be diagnosing a dead door with a meter.
9) When should I switch the MLRK1-CAL to high torque mode?
Torque mode is field switchable on the kit. Standard torque (900mA peak, 215mA hold) covers a normal opening; high torque (2A peak, 250mA hold) is the setting for devices that need more force to pull the latch, such as an opening under stack pressure or a device with heavier latch loading. Confirm your power supply can deliver the 2A peak per door before you switch it.
How fast can I get the Command Access MLRK1-CAL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Command Access MLRK1-CAL come with a warranty?
Absolutely. The Command Access MLRK1-CAL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Command Access MLRK1-CAL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Command Access MLRK1-CAL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!