Command Access MLRK1-KAW17 Mot...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$575.00
$420.67
Command Access MLRK1-KAW17 Motor Latch Retract Kit for Kawneer 1686/1786 Series

Command Access MLRK1-KAW17 Motor Latch Retract Kit for Kawneer 1686/1786 Series with 24VDC Operation

(No reviews yet) Write a Review

Model: MLRK1-KAW17

In Stock (leaves warehouse same day if ordered before 3pm ET)

$575.00
$420.67
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Command Access Motor Latch Retract Kit for Kawneer 1686/1786 Series with 24VDC Operation

Field-Installable Motorized Latch Retraction Solution

The Command Access MLRK1-KAW17 Motor Latch Retract Kit provides robust, field-installable motorized latch retraction specifically designed for Kawneer 1686/1786 series exit devices. This kit operates on 24VDC +/- 10% with 900mA peak current and 215mA hold current, utilizing a custom assembly to maximize pulling force. The system features Next Generation MM5 Smart Module technology with on-board diagnostics and supports wire runs up to 300 feet with 18ga wire for flexible installation options.

Professional Features & Benefits

  • Kawneer Series Compatibility: Specifically engineered for Kawneer 1686/1786 series exit devices with custom assembly design for maximum pulling force.
  • 24VDC Power Operation: Standard 24VDC +/- 10% operation with system protection that shuts down when voltage exceeds 28VDC for safe operation.
  • Extended Wire Run Capability: Supports up to 300 feet wire runs with 18ga wire, allowing centralized power supply placement for installation convenience.
  • Next Generation MM5 Smart Module: On-board diagnostics with audible feedback for adjustment and power issues, plus 1 Touch "PTS" Push to Set technology for quick post-installation adjustment.
  • Low Torque Mode: Capable of pulling all devices including tall vertical rod doors with electric dogging rated for continuous duty operation.
  • Auto Re-Engage Safety: Automatically re-engages if push pad is pulled from dogged position for enhanced security.
  • Quick Connect System: 8-inch cable with robust Quick Molex Connect for MM5 module connection to incoming power.
  • Manufacturer Warranty: 3-year "No Hassle" warranty for added confidence and protection.

Technical Specifications

  • Commercial/Residential: Commercial
  • Department: Door Hardware
  • Parts and Accessories Type: Replacement Parts
  • Product Attribute: Parts and Accessories
  • Product Category: Parts and Accessories
  • Product Group: Parts and Accessories
  • Product Subgroup: Motorized & Solenoid Latch Pullback Kits
  • Product Type: Latch Pullback Kits
  • Series: MLRK1-KAW17 Series
  • Subcategory: Exit Device Trim

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Command Access Quality?

Command Access motorized latch retraction products deliver professional-grade reliability with custom assembly construction and Next Generation MM5 Smart Module technology. The 3-year "No Hassle" warranty provides added confidence for demanding commercial applications. Engineered for demanding commercial applications where dependable automated exit device operation is essential.

Manufacturer Resources

Command Access Catalog

Product Specs

Product Group:
Parts and Accessories
Series:
MLRK1-KAW17 Series
Subcategory:
Exit Device Trim
Commercial/Residential:
Commercial
Product Type:
Latch Pullback Kits
Product Subgroup:
Motorized & Solenoid Latch Pullback Kits
Parts and Accessories Type:
Replacement Parts
Product Attribute:
Parts and Accessories
Product Category:
Parts and Accessories
Department:
Door Hardware

Command Access MLRK1-KAW17 – Frequently Asked Questions

1) Will the Command Access MLRK1 motor latch retract kit work on a Kawneer exit device?
The MLRK1-KAW17 kit is built specifically for Kawneer 1686 and 1786 series exit devices, using a custom assembly to maximize pulling force on those devices. It is not a universal kit. If the door has a different manufacturer's device on it, this is the wrong part number and you want the Command Access MLRK1 variant built for that device family.
2) What voltage and current does the Kawneer motorized latch retraction kit need from the power supply?
Power it at 24VDC +/- 10 percent. Draw is 900mA peak on the retract stroke and 215mA hold once the latch is pulled back, so size the supply on the peak figure across every door on the circuit, not the hold figure. The kit shuts itself down if voltage climbs above 28VDC, so an unregulated supply that drifts high will take the door offline rather than damage the motor.
3) How far can I run wire from the power supply to a Command Access MLRK1-KAW17 latch retract kit?
Up to 300 feet on 18ga wire. That is what lets you put one power supply in an electrical or IT room and feed exit devices at the far end of a corridor instead of dropping a supply near each opening. Longer than 300 feet or thinner than 18ga and you are outside what the kit is rated for.
4) Do I have to send the exit device out to be factory electrified, or can this be installed in the field?
Field-installable. The MLRK1-KAW17 is a retrofit kit that converts an existing Kawneer 1686/1786 exit device to motorized latch retraction on the opening, so you are not pulling the device off the door and shipping it to a factory or buying a whole new electrified device. That is the main reason to choose a latch retract kit over replacing the device.
5) Will a motor latch retraction kit pull a tall vertical rod door, or do I need something stronger?
It handles them. The kit has a low torque mode capable of pulling all devices including tall vertical rod doors, and the electric dogging is rated for continuous duty, so a door that sits dogged open through a whole business day is a normal application rather than an edge case.
6) How is the Command Access latch retract kit adjusted after it is installed on the door?
Adjustment is a one-button operation. The Next Generation MM5 Smart Module has 1 Touch PTS (Push to Set) technology, so you set the pull after the mechanical install instead of dialing it in by trial. The module also runs on-board diagnostics with audible feedback, so an adjustment problem or a power problem announces itself at the door rather than leaving you chasing it back at the supply.
7) What happens if someone pushes or pulls the panic bar while the door is electrically dogged?
The kit auto re-engages. If the push pad is pulled out of the dogged position, the motor re-engages on its own rather than leaving the opening sitting unlatched, so the door goes back to secure without anyone resetting it. For a property manager or facility with public-side doors on a scheduled unlock, that is the behavior that keeps the building from staying open after hours by accident.
8) How does the Kawneer latch retract kit connect to incoming power at the door?
Through an 8 inch cable with a Quick Molex Connect that plugs into the MM5 module. You land your 24VDC feed on the connector rather than hard-wiring into the module, which keeps swapping a module later to a plug-and-unplug rather than a re-termination.
9) Is the MLRK1-KAW17 a commercial-duty part or is it meant for residential doors?
Commercial. The MLRK1-KAW17 is a commercial replacement part for exit device hardware, and the applications it is built around are office buildings, schools, healthcare, retail, industrial and warehouse space, multi-tenant residential buildings, and government facilities. It is not a residential product, and there is no residential Kawneer 1686/1786 equivalent to fall back on.
How fast can I get the Command Access MLRK1-KAW17 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Command Access MLRK1-KAW17 come with a warranty?
Absolutely. The Command Access MLRK1-KAW17 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Command Access MLRK1-KAW17?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Command Access MLRK1-KAW17 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!