Thomas & Betts WJT-5035 Condui...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$60.37
$11.81
Thomas & Betts WJT-5035 Conduit and Voltage Marker Cards - Vinyl

Thomas & Betts WJT-5035 Conduit and Voltage Marker Cards - Vinyl

(No reviews yet) Write a Review

Model: WJT-5035
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$60.37
$11.81
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Conduit and Voltage Marker Cards - Vinyl

  • Features

    • OSHA compliant.
    • Manufactured of rugged Self-Sticking Vinyl with high-contrast black printing on safety orange background.
    • Helps prevent mistakes and trial and error searching during electrical service work.

  • Notes

    • Order Multiple 25 cards.
    • Character height 1 7/8 inches.

Manufacturer Resources

Product Specs

Inner Package:
25
Legend:
Three Phase
Markers Per Sheet:
1
Order Multiple:
25
Outer Package:
600
Package Height:
8
Package Length:
11
Package Width:
9.5
Product Group:
Cable Management & Identification
Rohs Compliance:
Yes
T B Sold In Uom:
Each
T B Weight Per Uom:
15.63 lbs. per 1000
Department:
Electrical
Product Subgroup:
Wire Markers & Labels
Product Color:
Black on Orange
Product Style:
A - 2 1/4" x 9"
Product Type:
Safety Label & Tag

Thomas & Betts WJT-5035 – Frequently Asked Questions

1) What does the Thomas & Betts WJT-5035 marker card actually say on it?
The legend reads "Three Phase" in black lettering on a safety orange background, with a character height of 1-7/8 inches. Each card carries one marker, so it is a single-legend card rather than a sheet of mixed legends.
2) How big is each WJT-5035 conduit marker card, and will it wrap a conduit run?
It is a Style A card, 2-1/4 inches by 9 inches. That 9 inch length is what lets it wrap around conduit or run along a raceway, and the 1-7/8 inch characters stay readable from the floor on overhead runs.
3) Can I buy a single WJT-5035 marker card, or is there a minimum quantity?
These are ordered in multiples of 25. The inner pack is 25 cards and the full case carries 600, so a facility standardizing on Three Phase markers across a building can order case quantity.
4) Do I need adhesive or a carrier to install these voltage markers?
No separate adhesive, tape, or clip is needed. The WJT-5035 is self-sticking vinyl, so it goes straight onto a clean, dry conduit or enclosure surface.
5) Are Thomas & Betts WJT-5035 markers acceptable for OSHA conduit identification?
The WJT-5035 marker card is stated as OSHA compliant, using high-contrast black printing on a safety orange field. That black-on-orange combination is the standard warning color scheme electricians expect for energized conduit identification. The cards are also RoHS compliant.
6) What is the exact part number for the Three Phase conduit marker from Thomas & Betts?
WJT-5035 is the manufacturer part number. Within the WJT marker card range the number is what distinguishes the legend, so ordering by WJT-5035 gets you the Three Phase card in the 2-1/4 x 9 inch Style A size.
7) How much does a case of these conduit markers weigh for freight?
Thomas & Betts rates the WJT-5035 at 15.63 lbs per 1000 cards, so weight is negligible even at case quantity. Shipping cartons measure 11 by 9.5 by 8 inches.
8) Why use printed vinyl marker cards instead of writing on conduit with tape and a marker?
Hand-marked tape fades and gets misread, which is exactly the trial-and-error searching these cards are meant to eliminate during service work. The WJT-5035 gives a consistent 1-7/8 inch printed legend on rugged vinyl that reads the same on every run in a building, which is what a maintenance crew needs when tracing circuits years after install.
How fast can I get the Thomas & Betts WJT-5035 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts WJT-5035 come with a warranty?
Absolutely. The Thomas & Betts WJT-5035 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts WJT-5035?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts WJT-5035 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!