You may also like
CONNECTOR AND SLEEVE IN KIT
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Insulation Material:
- Yes, Santoprene Sleeve
- Product Group:
- Wire & Cable Management
- Product Type:
- Lug Assembly with Cover
- Selling Unit Of Measure:
- each
- Type2:
- Wire terminal connector kit
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- Connector Diameter 29/32 in x 1-5/8 in
- Product Material:
- Aluminum
Blackburn LAC20WS2P – Frequently Asked Questions
1) Is the insulating sleeve included with the Blackburn LAC20WS2P, or do I have to buy it separately?
The sleeve comes in the kit. Blackburn ships the LAC20WS2P as a connector plus a Santoprene insulating sleeve, so you get the mechanical lug and its cover in one part number and do not have to source tape or a separate boot to finish the termination.
2) What voltage can I use this Blackburn lug kit on?
600 volts. That covers normal building branch and feeder work, panelboard and switchboard terminations, and service entrance conductors on 120/208, 277/480 systems. It is not a medium voltage connector, so anything above 600 V needs a different class of termination.
3) Is the LAC20WS2P body aluminum or copper, and can I land copper wire in it?
The connector body is aluminum. Aluminum mechanical connectors of this type are the ones you use for aluminum conductors, and dual rated aluminum bodies are common for copper as well, but conductor rating is stamped on the lug itself, so read the barrel marking before landing copper in it. If your spec calls for a copper-bodied lug, this is not that part.
4) How much room do I need in the gutter for this connector?
Plan around a connector diameter of 29/32 inch and a 1-5/8 inch dimension on the body, before you add the Santoprene sleeve over it. In a tight panel gutter or a crowded terminal cabinet, measure your bending space against those numbers, because the sleeve adds wall thickness around the finished joint.
5) Do I get one lug or a pair when I order a Blackburn LAC20WS2P?
It sells each, so one order quantity equals one kit: one connector with its sleeve. If you are terminating three phases and a neutral, order four.
6) Is this a crimp lug or a mechanical set screw connector?
It is a mechanical wire terminal connector kit, not a compression fitting, so it lands with a wrench or hex key rather than a hydraulic crimper. That is the reason crews use these for service and repair work where nobody wants to haul a crimp tool and die set to the job.
7) Is the Blackburn LAC20WS2P made in the USA for a Buy American job?
Country of origin is the United States. For federally funded or Buy American specified work that is the line your submittal package needs, and the MPN to put on the submittal is LAC20WS2P.
8) Will the Santoprene sleeve hold up in a wet or outdoor location?
Santoprene is the insulating material on the sleeve, and it is used on connector covers because it stays flexible and resists weathering and abrasion rather than going brittle like hard vinyl. It insulates the completed joint; it is not a substitute for a raceway or enclosure rated for the location, so the connector still belongs inside an enclosure suited to the environment.
9) Is there only one version of the LAC20WS2P, or do I need to pick a size?
One configuration. LAC20WS2P is a single model with no finish or size options to specify, so the only thing to decide is how many kits the job needs.
How fast can I get the Blackburn LAC20WS2P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn LAC20WS2P come with a warranty?
Absolutely. The Blackburn LAC20WS2P is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn LAC20WS2P?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn LAC20WS2P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.