Curved Jaw Grip for EHS Cable with Latch
S1684-74H - spec sheet
Features
- Latch
- To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ''V'' contour
- Made in USA to provide line workers with maximum strength and durability
- Available with hot-line latch and spring
- When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
- Do not exceed rated capacity.
S1684-74H - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.218" to 0.55" (5.54 to 13.97 mm)
- Cable Type:
- Aircraft, EHS, Messenger, Guy Strand
- Depth:
- 9.0000 in
- Height:
- 2.2500 in
- Hot Latch:
- Yes
- Jaw Length:
- 5" (12.7 cm)
- Jaw Type:
- Double V, Milled Curved
- Locking Handle:
- Yes
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Overall Height:
- 2.25" (5.7 cm)
- Overall Length:
- 9" (22.9 cm)
- Overall Width:
- 7.203" (18.3 cm)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 5.8500 lbs
- Width:
- 7.2000 in