You may also like
Klein Tools KT4501 Parallel Jaw Grip 4501 Series with Hot Latch
Model: KLN-KT4501
Parallel Jaw Grip 4501 Series with Hot Latch
Features
Hot Latch, Spring, Locking Handle
Hot latch closes automatically to guard against grip accidentally disengaging from wire
Versatile grip hold a...
Klein Tools
$312.07
$262.07
Klein Tools KT4602 Parallel Jaw Grip 4602 Series with Hot Latch
Model: KLN-KT4602
Parallel Jaw Grip 4602 Series with Hot Latch
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
Always match proper size and type of grip to application.
Do not...
Klein Tools
$441.61
$391.61
Klein Tools KT4802 Parallel Jaw Grip 4802 Series with Hot Latch
Model: KLN-KT4802
Parallel Jaw Grip 4802 Series with Hot Latch
Warnings
Always match proper size and type of grip to application.
Do not exceed rated capacity.
Before each use, clean jaw area and inspect grip for...
Klein Tools
$685.47
$635.47
Klein Tools KT4601 Parallel Jaw Grip 4601 Series with Hot Latch/Spring
Model: KLN-KT4601
Parallel Jaw Grip 4601 Series with Hot Latch/Spring
Features
Made in USA
Hot Latch, Spring, Locking Handle
Hot latch closes automatically to guard wire
Locking handle keeps jaw open while grip is...
Klein Tools
$441.61
$391.61
Klein Tools KT4801 Parallel Jaw Grip 4801 Series with Hot Latch/Spring
Model: KLN-KT4801
Parallel Jaw Grip 4801 Series with Hot Latch/Spring
Features
Max Safe Load of 12,000-Pound (5443 kg)
Large eyelet opening in the handle to accommodate a wide variety of hooks on hoists, winches and...
Klein Tools
$685.47
$635.47
Parallel Jaw Grip 4502 Series with Hot Latch
KT4502 - spec sheet
Features
- Hot Latch
- Weight - 3.75 pounds
- Made in USA
- Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
- Versatile grip hold a wider range of ACSR cable sizes reducing the number of grips needed
- Max Safe Load of 5000-Pound (2268 kg)
- Round jaw holds 0.18 to 0.60-Inch (4.57 to 15.20 mm) diameter cable range
- Large opening in the handle accommodate a wide variety of hooks on hoists, winches and tackle blocks
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
KT4502 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.18" to 0.6" (4.57 to 15.2 mm)
- Cable Type:
- ACSR, AAC, Copper
- Depth:
- 11.0000 in
- Height:
- 1.5000 in
- Hot Latch:
- Yes
- Jaw Length:
- 4" (10.2 cm)
- Jaw Type:
- Round - Serrated
- Locking Handle:
- No
- Maximum Safe Load:
- 5000 lb (2268 kg)
- Overall Height:
- 1.5" (3.8 cm)
- Overall Length:
- 11" (27.9 cm)
- Overall Width:
- 4" (10.2 cm)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Parallel Jaw Grip
- Weight:
- 3.7500 lbs
- Width:
- 4.0000 in