Parallel Jaw Grip 4601 Series with Hot Latch/Spring
KT4601 - spec sheet
Features
- Made in USA
- Hot Latch, Spring, Locking Handle
- Hot latch closes automatically to guard wire
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
- Max Safe Load of 10,000-Pound (4536 kg)
- Large opening in the handle accommodate a wide variety of hooks on hoists, winches and tackle blocks
- Versatile grip hold a wider range of ACSR cable sizes reducing the number of grips needed
- Round jaw holds 0.30 to 0.80-Inch (7.62 to 20.30 mm) diameter cable range
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- Always match proper size and type of grip to application.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- Do not exceed rated capacity.
KT4601 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.3" to 0.8" (7.62 to 20.3 mm)
- Cable Type:
- ACSR, AAC, Copper
- Depth:
- 10.0000 in
- Height:
- 1.0000 in
- Hot Latch:
- Yes
- Jaw Length:
- 5" (12.7 cm)
- Jaw Type:
- Round - Serrated
- Locking Handle:
- Yes
- Maximum Safe Load:
- 10,000 lb (4536 kg)
- Overall Height:
- 1" (2.5 cm)
- Overall Length:
- 10" (25.4 cm)
- Overall Width:
- 8" (20.3 cm)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Parallel Jaw Grip
- Weight:
- 7.0000 lbs
- Width:
- 8.0000 in