You may also like
Delaney 15-3/4" Double Sided Round Barn Door Pull Handle
Double-sided round barn door pull handle from Delaney Hardware. At 15-3/4" in length, this pull mounts through the door so both sides are operable, making it suitable for sliding barn doors in residential and light commercial applications.
Available Finishes
- US15 Satin Nickel
- US19 Black
- US10B Oil-Rubbed Bronze
Manufacturer Resources
Product Specs
- Subcategory:
- Barn Door Hardware
- Product Type:
- Door Pulls
- Series:
- Door Pulls
- Product Group:
- Sliding Door and Barn Door Hardware
- Product Subgroup:
- Barn Door Hardware
- Tags:
- barn door pull handles, sliding door handles
- Product Size:
- 15 3/4"
- Product Category:
- Sliding Door and Barn Door Hardware
- Department:
- Door Hardware
Delaney Hardware BD0461 – Frequently Asked Questions
1) Does the Delaney 15-3/4 inch round barn door pull put a handle on both faces of the door?
It does. The Delaney 15-3/4" round barn door pull is a double sided handle, so there is a matching grip on the front and back face of the slab. That is what you want on a barn door hung across a doorway, since you pull it open from the hall side and push or pull it closed from inside the room. A single sided pull leaves you with nothing to grab on the back face, which is the usual complaint after a barn door goes in.
2) Will a double sided barn door pull work on a pocket door?
No, and this is the most common wrong order on sliding hardware. The Delaney 15-3/4" round pull is a surface mounted handle that stands off both faces of the door. A pocket door slides into a cavity in the wall, so anything projecting from the face jams on the pocket frame. For a pocket door you need a recessed flush pull mortised into the edge and face of the slab. Use this one where the door stays outside the wall on face mounted barn door track.
3) Can I use this Delaney sliding door pull on bypass closet doors?
Not on bypass doors. Bypass panels run on two offset tracks and the rear panel passes directly behind the front one, so a handle projecting from the back face of the front door hits the rear panel. The Delaney 15-3/4" pull is double sided and stands off both faces, which rules that out. It suits a single barn door or a sliding door that runs on the wall surface with clear space behind it. For bypass panels, look for a flush or edge mounted pull that sits within the door thickness.
4) I need to match satin nickel hardware on the rest of my doors. What finishes does the Delaney round barn door pull come in?
Three finishes: US15 Satin Nickel, US19 Black, and US10B Oil-Rubbed Bronze. Those are standard BHMA finish designations, so if the levers and hinges already on your other openings carry a US code on the box or the spec sheet, you can match this pull to it code for code rather than eyeballing a photo. That matters on a building where the barn door is going in beside doors that were hardware-scheduled years ago.
5) Does the Delaney barn door pull handle come with the track and rollers?
It is the pull handle on its own. The Delaney 15-3/4" double sided round is a door pull, so the track, hangers, wall mount brackets, floor guide, and any stop or soft close are ordered as separate hardware. If you are specifying a barn door opening from scratch, budget the rail kit and the guide alongside this handle. If you are replacing a handle on a door that is already hung, the pull is all you need.
6) Does a barn door pull like this lock or latch the door?
No latching or locking function here. A pull is a grip only, with no bolt, no strike, and no privacy function. If the barn door covers a bathroom, a bedroom, or anything a tenant expects to secure, order a separate barn door privacy latch or hook style lock to go with it. Buyers standardizing a building often pair this handle with a latch on the bathroom openings and leave the pull alone on pantry or closet doors.
7) Is the Delaney 15-3/4 inch pull handed, or is it the same part for a door that slides either direction?
No handing to specify. The round double sided pull is symmetrical, so the same part goes on a door that slides left or one that slides right, and the same part serves both faces. Ordering for a multi-unit job is just a finish count: pick US15 Satin Nickel, US19 Black, or US10B Oil-Rubbed Bronze and order the quantity you need.
How fast can I get the Delaney Hardware BD0461 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware BD0461 come with a warranty?
Absolutely. The Delaney Hardware BD0461 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware BD0461?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware BD0461 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.