Delaney 7-3/4" Tubular Barn Door Pull Handle

No. The 7-3/4 inch tubular pull is the handle only. Track, hangers, floor guide, and door stops are separate items, so if you are outfitting a bare slab you need a barn door hardware kit alongside this pull.

Two finishes: Black (US19) and Oil-Rubbed Bronze (US10B). For a property manager matching pulls across a run of barn doors, US19 black reads flat and modern while US10B oil-rubbed bronze is the darker warm-brown tone that pairs with bronze hinges and levers already on the opening.

A tubular surface-mounted pull like the Delaney 7-3/4 inch handle sits proud of the door face and gives you something to grab from the room side. It does not solve the closed-side problem: where a barn door slides over a wall and you need to grip it from the edge or where it pockets, you want a flush or recessed pull in addition. Many installers order both, the tubular pull on the face and a flush pull on the leading edge.

Nothing about a 7-3/4 inch tubular pull restricts it to a sliding door. It is a surface-mounted grab handle, so it works anywhere a pull-only opening makes sense: a pantry slab, a gym or utility door with no latch, an oversized cabinet or a glass-front unit. On a hinged door it gives you a pull but no latching, so it suits doors held by a roller catch or magnet rather than a passage set.

Handing is not a factor. The tubular pull is symmetrical end to end, so the same part works on a left-hand or right-hand sliding door and can be mounted vertically or horizontally depending on how you want the grip to sit.