Delaney ET Lever - Grade 3 Pushbutton Privacy Leverset, Satin Nickel (US15)

Both. The ET lever is adjustable from 1-3/8 inch to 1-3/4 inch door thickness, so the same lock covers older interior doors and standard 1-3/4 inch slabs without a spacer kit.

Yes. The latch supplied with the ET privacy lever handles both 2-3/8 inch and 2-3/4 inch backsets, and the prep matches a standard cylindrical bore: 2-1/8 inch cross bore and 1 inch edge bore. If your existing knob or lever came out of that prep, this drops straight in.

No handing to specify. The ET lever is reversible in the field for left or right hand doors, so one part number covers both swings.

The latch bolt retracts from either side at all times. Pressing the button on the inside lever locks the outside lever; it's a panic-proof privacy function, so turning the inside lever still gets you out, and the outside side can be released for emergency entry. Correct for bedrooms and bathrooms, not for an exterior or keyed entry door.

No, the ET privacy lever is a plain pushbutton, with no occupancy indicator. If you need a red/green vacant-occupied display, the Cal-Royal INDLEV-20 privacy indicator leverset is the one to use, and it covers the same 2-3/8 and 2-3/4 inch backsets and the same adjustable 1-3/8 to 1-3/4 inch door thickness.

Both are privacy-function cylindrical leversets that fit doors 1-3/8 inch to 1-3/4 inch thick and work with 2-3/8 inch or 2-3/4 inch backsets. The Delaney ET is a Grade 3 residential privacy lock locked by a pushbutton on the inside, with the latch bolt retractable from either side at all times. The Cal-Royal INDLEV-20 is a standard duty commercial privacy leverset that adds a red/green occupancy indicator so the locked state is visible from the corridor side. If you need someone outside to see whether the room is occupied - restrooms, exam rooms, conference rooms - the INDLEV-20 is the one that shows it; for bedroom and bath doors in residential work the ET pushbutton covers the function.

The Delaney ET pushbutton privacy leverset is classified as residential Grade 3, so for a commercial restroom the Cal-Royal INDLEV-20 is the better fit: it is a standard duty commercial grade privacy leverset with a red/green occupancy indicator, which is what most restroom specifications call for. Both take the same prep, adjusting to 1-3/8 inch through 1-3/4 inch doors with a 2-3/8 inch or 2-3/4 inch backset, so switching between them does not change the door boring.

It's a Grade 3, residential-rated lockset with all metal construction. That's the right level for apartment and single family bedroom and bath doors. For a commercial corridor or a school restroom, step up to a commercial-duty privacy lever instead, such as the Cal-Royal INDLEV-20.

Both are included. You get a round corner face latch and a full lip round corner strike, plus combination screws that suit either a wood or a hollow metal door. Nothing else to add for a standard bored door.

Not this one. Privacy function means there is no keyed cylinder on the bed and bath lever, just the pushbutton. The ET series uses a KW1 solid brass 5 pin cylinder that can be pulled for re-keying on its keyed functions, so the entry and keyed-lever doors in the same series can go on a KW1 system while the bed and bath doors stay privacy.

The two share the prep envelope that matters: the Delaney ET pushbutton privacy leverset adjusts from 1-3/8 inch to 1-3/4 inch door thickness and is offered in 2-3/8 inch and 2-3/4 inch backsets, and the Cal-Royal INDLEV-20 is also adjustable 1-3/8 inch to 1-3/4 inch and covers both the 2-3/8 inch and 2-3/4 inch backset. Confirm the existing latch face and strike shape before ordering - the Delaney ET ships with a round corner latch and full lip round corner strike, and any replacement latch and strike should match the mortise already cut into the door edge and jamb.

No. The Delaney ET pushbutton privacy leverset is reversible for left or right hand doors, so one part number covers both swings and you do not need to count openings by handing when buying for a building. That reversibility, plus combination screws for wood or metal doors, is what makes it straightforward to standardize across a fleet of bedroom and bath doors. If the opening instead calls for a visible locked/unlocked signal, the Cal-Royal INDLEV-20 privacy leverset carries a red/green occupancy indicator.

Projection is 2-5/16 inches off the face of the door and the lever itself is 4-1/8 inches long. Worth checking against tight door-to-wall or door-to-casing clearances and against adjacent doors in a pair so the levers don't clash.

The finish is US15 satin nickel, the standard satin nickel code, so it matches other US15 / 15 hardware from the same ET Lever series on the neighbouring doors. Mounting screws are concealed, so you get a clean rose with no visible fasteners.