Delaney Kerry - Grade 3 Pushbutton Privacy Leverset

Both. The Kerry privacy lever adjusts from 1-3/8 to 1-3/4 inch door thickness, so the same lock covers older interior doors and standard modern doors without a separate part.

The Kerry privacy leverset covers both. The latch adjusts to 2-3/8 and 2-3/4 inch backsets, the two backsets used on residential doors, so you measure from the door edge to the center of the bore and set it to match.

If the door is bored to the standard cylindrical prep, yes. The Kerry needs a 2-1/8 inch cross bore and a 1 inch edge bore, which is the common bored-lock prep, plus a backset of 2-3/8 or 2-3/4 inches. It uses a round corner latch face and a full lip round corner strike, so if your existing latch face is square corner you will need to swap the strike or file the mortise to suit.

One lock does both. The Kerry is reversible for left or right hand, so you can stock a single part for a whole building's bedroom and bath doors and set handing at the door.

The Kerry is a panic proof design. The latch bolt retracts from either side at all times, so turning the inside lever always opens the door even with the button pushed. Pushing the inside button locks the outside lever only, and the lock releases when the inside lever is operated. There is no key on a privacy function.

No indicator on the Kerry, it is a plain pushbutton privacy lever with no outside status window. For a red and green occupancy indicator, the Cal-Royal INDLEV-20 privacy indicator leverset does that and also covers 2-3/8 and 2-3/4 inch backsets with the same 1-3/8 to 1-3/4 inch door thickness adjustment, so it drops into the same door prep.

Both are privacy-function lever locks that fit doors from 1-3/8 inch to 1-3/4 inch thick, and both cover 2-3/8 inch and 2-3/4 inch backsets. The Kerry is a Grade 3 residential privacy lock: the latch retracts from either side at all times, and the outside is locked when the inside pushbutton is pressed. The Cal-Royal INDLEV-20 is a standard duty commercial grade lever with a privacy indicator - a red/green occupancy window on the outside rose that tells someone in the corridor whether the room is occupied before they try the lever. If you need occupancy visible at a glance on a restroom or a single-occupancy room, the INDLEV-20 carries that indicator; the Kerry is the plain pushbutton privacy lever for bedroom and bath doors.

The Delaney Kerry privacy leverset is classified Grade 3 and residential, which suits bedroom, bath, and interior doors in a home or an apartment unit. For a commercial restroom taking public traffic, the Cal-Royal INDLEV-20 is the privacy lever built for that duty - it is a standard duty commercial grade privacy lock with a red/green occupancy indicator, so a user can see the room is in use without trying the lever. Both adjust to doors 1-3/8 inch to 1-3/4 inch thick and both are offered in 2-3/8 inch and 2-3/4 inch backsets, so the door prep is the same either way.

Grade 3 is a residential duty rating, and Delaney lists the Kerry as residential. That suits apartment and single family bedroom and bath doors. For a school, clinic, or office restroom where the door cycles all day, step up to a commercial duty privacy lever such as the Cal-Royal INDLEV-20.

Either. The Kerry ships with combination screws for wood or metal door mounting, so the same box works on a hollow metal bathroom door and a solid wood bedroom door. The mounting screws are concealed once the rose is on.

No. The Kerry comes with a round corner latch and a full lip round corner strike, plus combination screws for wood or metal doors. Everything to hang it on a properly bored door is in the box.

The two share the dimensions that decide a retrofit. The Kerry adjusts to door thicknesses from 1-3/8 inch to 1-3/4 inch and is available in 2-3/8 inch and 2-3/4 inch backsets, and the Cal-Royal INDLEV-20 covers the same 1-3/8 inch to 1-3/4 inch thickness range and the same two backsets. Confirm the existing cross bore and edge bore against the Kerry's 2-1/8 inch cross bore and 1 inch edge bore prep, and match the backset you measure from the door edge to the center of the bore.

No. The Kerry is a pushbutton privacy lever - the inside button locks the outside, and the latch still retracts from either side, but there is no visual occupancy signal on the outside trim. If the job calls for that signal, the Cal-Royal INDLEV-20 is the privacy lever with a red/green occupancy indicator. It is otherwise a close match on prep, covering 2-3/8 inch and 2-3/4 inch backsets and doors 1-3/8 inch to 1-3/4 inch thick, the same range the Kerry adjusts across.

For unit interiors - bedrooms and baths - the Delaney Kerry is the plainer standard: Grade 3, residential, pushbutton privacy, reversible handing so one part number serves left and right hand doors, and finishes in US15 Satin Nickel and US12P Tuscany Bronze. For shared or public restrooms in the common areas, the Cal-Royal INDLEV-20 adds the red/green occupancy indicator and is a standard duty commercial grade privacy lever. Both adjust to 1-3/8 inch through 1-3/4 inch doors and both come in 2-3/8 inch and 2-3/4 inch backsets, so a mixed fleet still uses one door prep.

Projection is 2-5/16 inches off the face of the door and the lever measures 4-1/8 inches long. Worth checking against a door that swings into a tight corner or against an adjacent wall, and against any push side clearance you need to keep.

Two: US15 satin nickel and US12P Tuscany bronze. If you are matching existing hardware across a floor of units, those are the finishes to hold the whole set to.

All metal construction throughout the Kerry lever, which is what you want on a door that gets used dozens of times a day in a rental unit.