Delaney Traditional - Grade 3 One-Sided Full Bore Deadbolt

No. The Delaney Traditional full-bore deadbolt is a one-sided unit: the outside face is a blank plate, and the bolt is thrown only by the thumbturn on the interior. If anyone needs to lock or unlock from the exterior, you need a keyed single-cylinder deadbolt instead. This one is for doors you secure from the inside, like a rarely used patio or service door, or a decorative front door where a separate keyed lock already handles entry.

It fits either standard backset, 2-3/8 inch or 2-3/4 inch, so it drops into the two prep dimensions used on residential doors. The cross bore is 2-1/8 inches and the edge bore is 1 inch, which is standard bored-door prep. If your door is already bored for a common residential deadbolt, this goes in without redrilling.

Yes, it covers 1-3/8 inch through 1-3/4 inch doors, so it handles both the thinner older interior slab and the standard 1-3/4 inch exterior door. Anything thicker than 1-3/4 inches is outside its range.

The bolt throws a full 1 inch and ships with a 2-1/4 inch full lip, round corner strike. If your jamb currently has a round corner strike with the same 2-1/4 inch lip, the new one drops into the existing mortise. If your existing strike has square corners, you will need to square the mortise corners with a chisel or reuse the old strike, provided its pocket is deep enough for a 1 inch bolt.

No, and that's the deciding point for a fleet of doors. The Delaney Traditional full-bore deadbolt has no cylinder at all, just a blank exterior plate and an interior thumbturn, so there is nothing to key and no master key system to bring it into. It's the right part for doors your staff secures from inside. Any door your maintenance crew needs to open from the corridor or exterior needs a keyed deadbolt or a keyed handleset instead.

The Delaney Traditional Grade 3 deadbolt is a one-sided function with a blank plate on the outside of the door, so it is thrown only from the inside. When the exterior side has to be operated with a key, the Callan Visconti Single Cylinder Handleset with Interior Trim (CLN-374001) and the Callan Briona Single Cylinder Handleset with Interior Trim (CLN-374107) are both single cylinder Grade 3 assemblies that carry a keyed exterior. Those are full handlesets with interior trim rather than a bolt alone, so the door prep and the amount of hardware on the face differ from a full bore deadbolt.

No. The Schlage Residential J10 Builders Basics knob (SCR-J10-K11) and the Schlage Residential F10 Accent lever (SCR-F10-NONKEYED-ACC) are both passage function, meaning they latch the door closed but throw no bolt. The Delaney Traditional is a deadbolt function with a 1 inch throw operated from the inside. The two are complementary rather than interchangeable: a passage knob or lever handles the door in the cross bore, and the deadbolt does the securing above it.

The Delaney Traditional one-sided full bore deadbolt is Grade 3. Where a Grade 2 rating is required, the Bravura Savannah handleset (BVR-BV913002906R), the Bravura Jacksonville handleset (BVR-BV915002906R), the Bravura Austin handleset (BVR-BV971002906R) and the Bravura Montgomery handleset (BVR-BV973002) are Grade 2. The Bravura units are handleset assemblies with interior trim, so they change what is mounted on both faces of the door rather than adding a bolt behind a blank exterior plate.

Both. The Delaney Traditional deadbolt ships with combination screws that mount to wood or metal doors, so a hollow metal service door and a wood slab both take the same unit with no separate fastener kit.

The Delaney Traditional deadbolt is Grade 3 and is built for residential duty, not commercial traffic. For an apartment entry or a single-family rental that's the normal specification. For a commercial opening, a building with heavy turnover on that door, or anywhere a facility spec calls for a higher grade, step up rather than using this one.

No. A deadbolt has no handing, and this one has no exterior cylinder to orient. What you do have to get right is the backset your door is bored for, 2-3/8 inch or 2-3/4 inch, which the unit accommodates either way, and the door thickness, which must fall between 1-3/8 and 1-3/4 inches.

For a keyed exterior entry, look at the single cylinder handlesets rather than a one-sided bolt. The Callan Visconti and Callan Briona single cylinder handlesets are both Grade 3, the same grade as the Delaney Traditional deadbolt. If you want a step up in grade, Bravura's handlesets are Grade 2, including the 913-Savannah, 915-Jacksonville and 971-Austin with a Macon interior knob, or the 973-Montgomery with a Charlotte interior lever.

It's the deadbolt only. There is no latch to hold the door closed and no knob or lever included, so on a door that also needs a handle you order that separately. For a matching residential passage set, ZenSupply carries the Schlage Residential J10 Builders Basics knob, which uses the same 2-3/8 or 2-3/4 inch adjustable backset and the same 1-3/8 to 1-3/4 inch door thickness range, or the Schlage F10 Accent lever passage set with a dual backset latch.

The Delaney Traditional one-sided full bore deadbolt fits standard doors from 1-3/8 inch to 1-3/4 inch and is thrown by hand from the inside, with no keyway or credential on the outside. For openings that need a reader at the door, the Paxton PaxLock Pro Galaxy lever latch lock (PAX-900-620WT-US) is a battery powered lever latch lock with a dual frequency 13.56 MHz and 2.4 GHz reader, Bluetooth, AES128 encryption, UL and FCC listings, for 1-3/4 inch door thickness. It replaces the lever latch in the cross bore and is a mechanically different device from a bolt.

The Delaney Traditional one-sided full bore deadbolt fits standard doors from 1-3/8 inch to 1-3/4 inch. Among the residential alternatives, the Schlage Residential F10 Accent lever (SCR-F10-NONKEYED-ACC) and the Schlage Residential J10 Builders Basics knob (SCR-J10-K11) both carry a door thickness range of 1-3/8 inch to 1-3/4 inch, and the J10 is adjustable to a 2-3/8 inch or 2-3/4 inch backset with round corners, matching the backsets and round corner faceplate the Delaney deadbolt uses. Those Schlage units are passage function, so they cover the same door but a different job on it.

Two: US32D stainless steel and US15 satin nickel. Both are brushed silver tones, so either will sit reasonably with existing satin chrome or brushed nickel trim on the rest of the opening. If your other doors carry a bronze or brass finish, this deadbolt will not match them.

The faceplate measures 1 x 2.25 inches with round corners. That's the standard bored deadbolt faceplate footprint, so on a door edge already mortised for a round corner deadbolt latch it seats without recutting. A square corner mortise needs its corners squared off or the plate radiused to fit.

No. The Emtek Select Brass Conical Stem Dark Walnut Knob is a passage function knob, which operates the latch and does not throw a bolt. The Delaney Traditional is a deadbolt with a blank exterior plate and a 1 inch throw. On a decorative opening the two are often ordered together, the Emtek knob handling the door and the Delaney deadbolt handling the security, rather than one standing in for the other.