You may also like
Delaney Tulina Round Trim Dummy Door Lever
Single Dummy: Single dummy function door hardware utilize this single dummy handle to create a uniform look throughout your home in the areas that do not require mechanical systems. Dummy door hardware is surface mounted with no locking mechanism and are used primarily for the inactive door in a double door installation serving as a pull.
Features:
- Constructed of high quality materials for lasting durability
- Installs easily with all necessary mounting hardware included
- Covered by a limited lifetime warranty
Specifications:
- Door Thickness: 1-3/8" to 1-3/4"
- Handing: Reversible Left or Right
- Handle Length: 4-1/16"
- Handle Projection: 2-5/16"
- Trim Height: 2-9/16"
- Trim Width: 2-9/16"
- Product Weight: 2 lb.
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- Tulina
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Function:
- Dummy
- Product Type:
- Lever
- Grade:
- Grade 3
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Dummy
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Delaney Hardware D25220 – Frequently Asked Questions
1) What is a dummy lever like the Delaney Tulina used for?
A dummy lever is surface mounted trim with no latch and no locking mechanism. The Tulina round trim dummy is what you put on the inactive leaf of a double door so there's something to pull on, or on a closet or pantry door that doesn't need to latch. There's no bore-through function, no cylinder, no spindle turning anything. If you need the door to actually stay shut, you want a passage or privacy lever instead, not this one.
2) Will the Delaney Tulina dummy lever work on a 1-3/8 inch door?
Yes. The Tulina round trim dummy covers 1-3/8 inch to 1-3/4 inch doors, which spans both the older interior thickness and standard 1-3/4 inch. Since it's a dummy, the thickness range is about the mounting screws rather than a spindle length, so both common thicknesses are handled by the included hardware.
3) Do I need to order a left hand or right hand Delaney Tulina dummy lever?
Neither. The Tulina dummy lever is reversible left or right, so one part covers both hands. Order one per leaf and set the handing at install. On a pair of doors that means two of the same part number, one pointed each way.
4) Does the Tulina dummy lever need a hole bored in the door?
No cross bore is needed. The Tulina dummy is surface mounted, so it fastens to the face of the door with the included mounting hardware rather than going through a 2-1/8 inch bore. If your door is already bored for a standard lockset and you want to cover the hole, a dummy won't do it. You'd need a passage lever that fills the prep.
5) Is the Delaney Tulina lever rated for commercial use?
It's a Grade 3 residential lever. Grade 3 is the lowest of the three ANSI/BHMA cycle and strength tiers, and the Tulina is catalogued for residential duty. For apartments, single family, and light multi-family interior doors that's a reasonable fit. For a school, hospital, or any high traffic commercial opening, spec a Grade 1 or Grade 2 lever instead.
6) Can I use a dummy lever on the active door of a French door pair?
Only if that leaf never has to latch. On a standard French door pair the inactive leaf gets flush bolts plus a dummy lever as the pull, and the active leaf gets a real latching lever. Putting the Tulina dummy on the active leaf leaves the pair with nothing holding it closed. Order one Tulina dummy for the inactive side and match it with a latching Tulina lever on the active side for the same look.
7) How far does the Delaney Tulina lever stick out from the door?
Projection is 2-5/16 inches off the face of the door, with a 4-1/16 inch handle length. That projection is what matters if the door swings into a tight corridor, next to a cased opening, or where a lever could catch a passing cart. The round rose measures 2-9/16 inches high by 2-9/16 inches wide.
8) Do I have to buy mounting screws separately for the Tulina dummy lever?
No. All the mounting hardware needed comes in the box. Nothing else is required to hang it on a 1-3/8 to 1-3/4 inch door, since there's no latch, strike, or cylinder in a dummy application.
9) What finishes does the Delaney Tulina round trim dummy lever come in?
Three: US15 satin nickel, US26 polished chrome, and US19 black. If you're matching Tulina passage and privacy levers elsewhere in the unit, pick the same US number across the set. US15 and US26 are the two most commonly carried through a residential fleet, and US19 black reads flat rather than bright.
How fast can I get the Delaney Hardware D25220 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware D25220 come with a warranty?
Absolutely. The Delaney Hardware D25220 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware D25220?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware D25220 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.