You may also like
Delaney Tulina Square Trim Dummy Door Lever
Single Dummy: Single dummy function door hardware utilize this single dummy handle to create a uniform look throughout your home in the areas that do not require mechanical systems. Dummy door hardware is surface mounted with no locking mechanism and are used primarily for the inactive door in a double door installation serving as a pull.
Features:
- Constructed of high quality materials for lasting durability
- Installs easily with all necessary mounting hardware included
- Covered by a limited lifetime warranty
Specifications:
- Door Thickness: 1-3/8" to 1-3/4"
- Handing: Reversible Left or Right
- Handle Length: 4-1/16"
- Handle Projection: 2-5/16"
- Trim Height: 2-9/16"
- Trim Width: 2-9/16"
- Product Weight: 2 lb.
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- Tulina
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Function:
- Dummy
- Product Type:
- Lever
- Grade:
- Grade 3
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Dummy
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Delaney Hardware D25220S – Frequently Asked Questions
1) What is a dummy lever, and does the Delaney Tulina square trim lever actually latch a door?
No latch, no bolt, no bore-through mechanism. The Tulina dummy lever is a surface-mounted pull with a fixed handle that does not turn a latch. It's used on the inactive leaf of a double door, or on a closet or pantry door that only needs a pull and a matching look. If you need the door to latch shut, you need a passage lever instead.
2) Will the Delaney Tulina dummy lever work on a 1-3/8 inch door?
Yes. The Tulina dummy lever covers 1-3/8 to 1-3/4 inch doors, which spans both the common older interior door and the standard 1-3/4 inch slab. Because it is surface mounted with no through-bore mechanism, thickness matters far less here than it would on a functioning lockset.
3) Do I need to order a left-hand and a right-hand Delaney Tulina dummy lever separately?
One part covers both. The Tulina dummy lever is reversible left or right, so you order the same item for either leaf of a pair and set the handing at install. That matters on a double door where you want the two levers mirrored.
4) Is the Delaney Tulina Grade 3 lever suitable for a commercial building or apartment corridor?
Grade 3, and classified residential. That puts the Tulina dummy lever in single-family homes, condos, and light multi-family interiors. For a commercial corridor, a stairwell, or anything on a code-driven opening in an institutional facility, specify a Grade 1 or Grade 2 commercial lever instead. On a dummy application the grade carries less weight since nothing cycles, but the finish and construction are built to a residential duty level.
5) How far does the Delaney Tulina lever stick out from the door, and how much clearance do I need?
Projection is 2-5/16 inches off the face of the door, with a 4-1/16 inch handle length. On a pair of doors, or anywhere a lever swings past a wall return or an adjacent casing, that 2-5/16 inches is the number to check against your clearance before you set the door stop.
6) What size is the Delaney Tulina square rose, and will it cover the holes from the lever I'm taking off?
The square trim measures 2-9/16 inches high by 2-9/16 inches wide. Since it is a dummy, it mounts to the door face rather than through a standard 2-1/8 inch cross bore, so on a previously bored door the rose will not fully cover a 2-1/8 inch hole. On an unbored door or a door being replaced, that's a non-issue.
7) Do I need to buy mounting screws or a separate rose for the Delaney Tulina dummy lever?
Everything to mount it ships with it. All necessary mounting hardware is included, so the install is the lever, the square rose, and the fasteners in the box, fixed to the door face. No cylinder, no strike, no latch to order.
8) Can I match the Delaney Tulina dummy lever to the working levers on my other doors?
That is what it's for. The Tulina square trim dummy carries the same lever design and 2-9/16 inch square rose as the functioning Tulina levers, so a closet or an inactive door reads the same as the passage and privacy doors down the hall. Order the same finish code, US15, US26, or US19, across the openings.
9) How heavy is the Delaney Tulina dummy lever, and will it hold on a hollow-core door?
Two pounds. Because it is surface mounted rather than carried in a bore, the fasteners land in the door skin and stile, so on a hollow-core slab set it into the solid stile rail rather than the flat panel area.
How fast can I get the Delaney Hardware D25220S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Delaney Hardware D25220S come with a warranty?
Absolutely. The Delaney Hardware D25220S is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Delaney Hardware D25220S?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Delaney Hardware D25220S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.