Deltana CH3025 Cabinet Hinge, 3" x 2-1/2", with Ball Tips (Pair)

The CH3025 measures 3 x 2-1/2 inches overall, which is the standard way a full mortise cabinet hinge is called out: the first number is the hinge height and the second the open width across both leaves. Leaf material is .125 inch thick. If you're matching an existing hinge, measure the old one closed, open it flat, and compare both numbers before ordering.

Square corners. The CH3025 leaves are cut square, so they drop into a chiseled square mortise or a router mortise squared out at the corners. If your existing hinges have rounded leaf corners from a router bit, this one will not sit in that pocket without squaring the corners first.

Eleven finishes on the CH3025: PVD polished brass, polished brass, unlacquered brass, antique brass, polished nickel, brushed nickel, antique nickel, polished chrome, brushed chrome, oil rubbed bronze, and paint black. If you're matching Deltana knobs or pulls already on the cabinets, the finish names carry across the line, so order the hinge in the same finish name. PVD polished brass and standard polished brass are not the same product: PVD is a coated finish, plain polished brass is lacquered, and unlacquered brass is left bare to age.

Solid brass, not plated steel with a brass look. That matters two ways: it will not rust in a kitchen or bath, and on the unlacquered brass version the metal patinas naturally rather than wearing through a plating layer to a different base metal underneath.

Deltana lists the CH3025 as a residential cabinet hinge. It's built for kitchen, bath, and furniture cabinetry, not for the door traffic of a commercial opening. Property managers doing apartment kitchen refits are in the right place; anyone specifying millwork hardware for a high-traffic institutional casework package should be looking at commercial-rated hinges instead.

Ball tips are standard and integral to the CH3025 as ordered. Deltana builds the ball tip finial onto this hinge rather than shipping it as a swappable accessory, so if you want a plain barrel or a different tip profile, that's a different Deltana cabinet hinge model, not an option on the CH3025.