Deltana CL600EVC Commercial Entry Standard Grade 2, Curved Lever with Cylinder

Yes. The CL600EVC is built for doors from 1-3/8 inch up to 2 inch thick, so it covers both the older 1-3/8 interior doors and standard 1-3/4 commercial doors without any spacer kit. Anything thinner than 1-3/8 or thicker than 2 inches is outside the range.

It ships with a 2-3/4 inch backset, which is the usual commercial prep. A 2-3/8 inch backset is sold separately rather than being included in the box, so if your door is bored at 2-3/8 you need to order that latch as a separate line.

Universal handing. One CL600EVC covers left and right hand openings, so property managers buying for a building full of mixed-swing doors can stock a single part number instead of splitting the order by hand.

The cylinder is a Schlage C keyway, single cylinder (key outside, thumbturn or button inside), so it goes into a Schlage C based system. Confirm your system is C and not one of the restricted keyways before you commit the whole building to it.

The lock comes with an ANSI strike measuring 4-7/8 by 1-1/4 inches, which is the standard commercial frame prep, and the latch has a 1/2 inch throw. If your frame is already cut for a full ANSI strike, it drops straight in. Residential frames prepped for a small T-strike will need the opening enlarged.

On the CL600EVC the function is entry with a single cylinder, so the outside lever can be left unlocked for free passage and locked when needed. A storeroom function keeps the outside lever locked at all times and only the key retracts the latch. If the opening needs that always-locked behavior, the Hager 2580 is a Grade 2 storeroom cylindrical lock with the Withnell lever for doors 1-3/8 inch to 2 inch, and the Cal-Royal AG05 is a Grade 2 storeroom lever lockset with a deadlocking latchbolt for doors 1-3/8 inch to 1-3/4 inch.

The Deltana CL600EVC is a Grade 2 commercial cylindrical entry leverset with a keyed single cylinder. The nearest like-for-like peer is the Hager 2525, a Grade 2 commercial cylindrical entry lock with a lever handle that fits doors 1-3/8 inch to 2 inch thick - the same door thickness range the CL600EVC covers. Both are lever-operated Grade 2 entry cylindrical locks, so a Hager 2525 drops into the same bored opening and serves the same office or tenant entry role.

The Deltana CL600EVC is a Grade 2 commercial entry leverset. For a higher ANSI/BHMA grade on a keyed cylindrical opening, the Dexter C1000 series is Grade 1: the C1000 classroom version is a Grade 1 keyed cylindrical lever for doors 1-3/8 inch to 1-3/4 inch thick, and the C1000 asylum version is Grade 1 for doors 1-3/8 inch to 2 inch. Those are different keyed functions than entry, so confirm the function code matches how the door needs to behave before ordering.

The CL600EVC is a keyed single-cylinder entry lever, so for a hall, closet or corridor door that only needs latching, a passage function lever is the right swap. Same-grade options include the Hager 2510, a Grade 2 passage cylindrical lever for doors 1-3/8 inch to 2 inch, and the Falcon B101, a Grade 2 medium duty non-handed passage lever. The Arrow GL01 is also a Grade 2 non-keyed passage lock, but it is listed for doors 1-3/4 inch to 2 inch, so it will not cover thinner doors the CL600EVC handles.

The CL600EVC uses a Schlage C type keyway, which is what makes it easy to fold into an existing master key system. Among the peers on the same keyway, the Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway keyed different and a 2-3/8 inch backset, the Cal-Royal AG03 is the classroom function in the same AG series, and the Arrow MK33-BD-CS is a Grade 2 asylum cylindrical lock with a conventional cylinder in Schlage C - though that one is a ball knob rather than a lever. Note the AG00 comes with the 2-3/8 inch backset while the CL600EVC ships 2-3/4 inch with 2-3/8 inch sold separately.

Entry function on the CL600EVC lets the inside control locking, which is not what a classroom door calls for. For classroom openings, the Cal-Royal AG03 is a classroom lever with a 6-pin Schlage C keyway keyed different on a 2-3/4 inch backset - the same keyway family and the same backset the CL600EVC ships with, so it fits an existing key system and prep. For a higher grade, the Dexter C1000 classroom is a Grade 1 clutching keyed lever for doors 1-3/8 inch to 1-3/4 inch, and the C1000 classroom security version adds inside keyed control.

Grade 2 is the standard commercial duty tier and it suits office entries, apartment unit doors, and light to moderate traffic tenant spaces. For a high-cycle main entrance, a school corridor, or anywhere abuse is expected, step up to a Grade 1 cylindrical lock such as the Dexter C1000 Series or the Falcon K Series.

It is a cylindrical, tubular chassis lockset. It installs into a bored door (round cross bore plus edge bore) rather than a mortise pocket, so it is not a drop-in replacement for a mortise lock body without filling and re-prepping the door edge.

The latch is UL Listed with a 1/2 inch throw. That listing applies to the latch itself as stated on the lock's specifications.

The Hager 2525 is the closest match: Grade 2 commercial cylindrical entry lock covering the same 1-3/8 to 2 inch door thickness range. The Falcon B511CP6D is a Grade 2 medium duty entry/office lever, and the Cal-Royal AG00 is a Grade 2 entrance lever also cut to Schlage C keyway if keying consistency is what you are protecting.

Not on a spec that calls for Grade 2. The CL600EVC is a Grade 2 commercial-rated entry leverset. The Callan Artino and Callan Bennett entrance leversets are Grade 3, as is the Cal-Royal AUS00 entrance/office lever and the Master Lock BC series keyed entry lever. Grade 3 is a lighter ANSI/BHMA cycle and strength class, which suits residential-traffic doors; for an office, tenant entry or common-area door written to Grade 2, those will not satisfy the drawing.

No - the CL600EVC is a keyed entry lockset with a working latch, so it is not interchangeable with dummy trim. For an inactive leaf or a pull-only door you want a dummy: the BEST 7KC series single dummy trim lever is Grade 2 medium duty, the BEST 9K series 1DT is Grade 1 heavy duty, and the Accentra 455LN Augusta is a Grade 1 single dummy cylindrical lever. Dummy trim has no latch and no cylinder, so it cannot secure the opening the CL600EVC is intended for.

The CL600EVC is a keyed single-cylinder lever. If you would rather issue codes than keys on the same bored door, the Delaney LP250 is a Grade 2 electronic keypad leverlock, and the Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function and ADA compliance for doors 1 3/16 inch to 2 inch; the Lockey 2835DC adds a double combination. The Lockey 1150 is a heavy duty mechanical keypad lever set with an adjustable backset for doors 1-1/8 inch to 2 inch. Keypad models change how the door is administered, so confirm who is responsible for code changes before you switch a fleet over.

The CL600EVC is rated for doors 1-3/8 inch to 2 inch, so a thicker leaf needs a different chassis. The Falcon K101 is a Grade 1 heavy duty cylindrical lock listed for doors 1-3/8 inch to 2-1/4 inch, which covers the thicker range - it is a non-keyed passage function, so it suits a corridor door rather than a secured entry. For 1-3/4 inch to 2 inch doors specifically, the Corbin Russwin CL33903 is a Grade 1 electrified lever in the CL33900 series.

They are close. The CL600EVC is a Grade 2 cylindrical entry lever, and the Falcon B511CP6D is a Grade 2 medium duty cylindrical lever with entry/office function - same grade, same lever-operated bored chassis, and an entry/office function that behaves the way an entry lock does with the addition of office-style locking. The practical differences to check are keyway and backset: the CL600EVC is Schlage C with a 2-3/4 inch backset supplied and 2-3/8 inch sold separately.

An entry lock with a key cylinder is the wrong function for a bathroom or bedroom, where you want a thumbturn inside and an emergency release outside rather than a keyed cylinder. The Hager 2540 is a Grade 2 privacy cylindrical lock with the Withnell lever for doors 1-3/8 inch to 2 inch, matching the CL600EVC door thickness range, and the Arrow MK02-TA is a privacy cylindrical lock with a fire rating, though it uses a Tudor knob rather than a lever.

Mechanically it can fit the same bored prep, but the trim is different. The CL600EVC has a lever handle, which is what ADA-driven specs generally call for on commercial openings. The Arrow HK11-BB is a turn-pushbutton entrance cylindrical lock with a ball knob and a conventional cylinder for doors 1-3/8 inch to 1-3/4 inch - same entrance function, knob trim instead of a lever, and a narrower door thickness range than the 1-3/8 inch to 2 inch the CL600EVC covers.

Two: Oil Rubbed Bronze and Brushed Chrome. If you are matching existing hardware across a building, those are the only two trim options on this model, so a darker antique or polished brass opening will not match.

Steel and zinc construction, mounted with removable through-bolts. Through-bolting pulls the two roses together through the door rather than relying on screws into the chassis alone, which holds up better on a lever that gets pulled and hung on.

The CL600EVC is the keyed entry function only. For the non-keyed openings on the same job, Hager offers the 2510 passage and 2540 in the same Grade 2 family, and the Falcon B101 is a Grade 2 non-handed passage lever. Trim styling will not match the Deltana curved lever exactly, so if visual consistency matters across a suite, plan the whole opening group around one brand family.