Deltana DP2576 Door Pull with Rosette, 8"

The DP2576 is built to pair with Deltana's PPH3515 push plate, so you get a matched push/pull set on a single leaf. Order the pull in the finish you want and specify the same finish on the push plate. If you want a pull on both faces instead of a push plate, the DP2576 is also offered back-to-back.

Deltana rates the DP2576 for commercial use. It is a decorative solid brass pull with rosettes, so it suits storefront entries, offices, lobbies, and hospitality doors. For a high-abuse opening, a school corridor or a hospital service door, look at a heavy duty pull like the Ives 8103HD, a 1 inch round pull with through-bolt mounting, instead.

That is the back-to-back configuration, and Deltana offers it on the DP2576. Ordered that way the two pulls share through-fasteners so they anchor against each other rather than into the door face alone, which is what you want on a door where a surface screw has nothing solid to bite. Order it as the back-to-back option, not as two single pulls.

The DP2576 is an 8 inch solid brass pull with a rosette. Where an opening has to meet ADA, the Ives 8145EZHD is the part written for it: a 45 degree offset door pull with heavy duty mounting hardware, described as ADA compliant in the EZ series. An offset pull puts the grip clear of the door face so the hand does not have to close around the door edge. Institutional and MRO buyers writing to an accessibility spec should order the 8145EZHD rather than substituting a surface rosette pull.

The DP2576 is an 8 inch pull. That is the size Deltana publishes for the model, and it is measured the same way across the Deltana pull range, so if you are standardizing on 8 inch pulls across a set of doors this is the size to order. The rosettes are the round bases the grip mounts to.

Five: PVD Polished Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, and Polished Chrome. If you are matching existing hardware in a lobby or a unit turnover, the PVD polished brass is the one that stays bright, while oil rubbed bronze and antique nickel are the darker living looks that change with handling.

No handing to specify on the DP2576. It is a symmetrical pull on two rosettes, so it goes on either leaf of a pair and works push or pull side. Some decorative 8 inch pulls do require it, the Emtek Art Nouveau asks you to select handing, so do not assume that carries across brands when you are ordering a mixed set.

The rosette style puts the grip on two decorative round bases that cover the mounting at the door face, which is the look you want on a finished entry or a millwork door. A straight bar pull such as the ABH AB3300 or the Ives 8102HD mounts the bar directly, with the Ives listed at 3/4 inch round bar and 1-1/2 inch clearance, and is the plainer heavy duty answer for back-of-house and service openings.

The DP2576 is a straight 8 inch pull on a rosette. Offset pulls change the geometry rather than the length: the ABH AB3310 is an offset flat end door pull for surface mounting, the AB3330 is an offset round end pull available in custom lengths, and the Ives 8169 is a C style offset solid pull at 1 inch diameter with heavy duty mounting. Offset styles stand the grip away from the door face; the DP2576 keeps the grip close to the face on its rosette. If your drawing calls a specific length that is not a stock 8 inch, the AB3330 custom length option is the one to price.

They do different jobs on the two faces of a door. The DP2576 is a pull for the side that opens toward you, and Deltana states it is compatible with the PPH3515 push plate for the opposite face. If you are specifying the push side separately, the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch, the Trimco 1041 is a half-round push plate at 8 inch by 16 inch, and the Trimco 1070 series classic push/pull plates run 3-1/2 inch by 15 inch. A plate is not a substitute for the pull itself; it is the other half of the pair.

No. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, stainless steel construction. A cylinder pull is fitted around a rim cylinder on a night latch so the door can be pulled shut at the cylinder, and it is not a hand pull for general use. The DP2576 is an 8 inch solid brass pull on a rosette, mounted to the door face. A locksmith replacing a cylinder pull needs the PUL-175 family; a buyer replacing a decorative door pull needs the DP2576.

Where the decorative rosette is not wanted, the ABH AB3300 is a straight flat end pull handle at 1.00 inch diameter, described as a commercial door pull. It gives the same straight grip form without the brass rosette detail of the DP2576. The Ives 8103HD is the other plain straight option, a 1 inch round bar with through bolt mounting. Both differ from the DP2576 in that the DP2576 is solid brass and offered in PVD polished brass, oil rubbed bronze, brushed nickel, antique nickel, and polished chrome finishes.

The DP2576 sells each, one pull per unit. A single leaf with a push plate on the reverse takes one; a pair of doors takes two; a back-to-back application takes the back-to-back version rather than two separate units.