Deltana DP2578 Door Pull with Rosette, 10"

The DP2578 is built to pair with Deltana's PPH3520 push plate, so you get the pull on the pull side and a matching plate on the push side. Order both in the same finish and the opening reads as one set. If you want a pull on both faces instead, the DP2578 is also offered as a back to back option.

It is rated commercial by Deltana, and it is solid brass rather than plated pot metal, so it holds up in a lobby, a tenant entry, or a corridor door. Where it fits less well is a high abuse opening such as a school corridor or a back of house service door. For those, look at a through bolted straight pull like the Ives 8103HD or the ABH AB7200 stainless pull, both of which are built as heavy duty commercial handles.

The DP2578 is a decorative solid brass pull with rosettes, so if the job calls for a plain utilitarian handle the alternatives are better suited. The ABH AB3300 is a 1 inch diameter straight flat end pull, the ABH AB3310 and AB3330 are offset versions, the Ives 8102HD uses a 3/4 inch round bar with 1-1/2 inch clearance, and the Ives 8145EZHD is a 45 degree offset pull described as ADA compliant. Those are the ones to spec when the drawing calls for a straight or offset commercial pull.

For a service or back of house opening, the Ives heavy duty straight pulls are the usual answer. The Ives 8102HD is a heavy duty straight pull with a 3/4 inch round bar and 1-1/2 inch clearance, and the Ives 8103HD is a heavy duty straight pull with a 1 inch round bar and through bolt mounting. The Deltana DP2578 is a 10 inch solid brass pull with a rosette, which is a decorative trim style rather than a heavy duty bar pull.

The Ives 8145EZHD is a 45 degree offset door pull with heavy duty mounting hardware and is described as ADA compliant in the EZ series. The Ives 8169 is a C style offset solid pull, 1 inch diameter, with heavy duty mounting, if you want an offset shape in a different profile. The Deltana DP2578 is a straight 10 inch solid brass pull with a rosette, so an offset peer is the change in geometry to look at.

Five: PVD Polished Brass, Polished Chrome, Brushed Nickel, Antique Nickel, and Oil Rubbed Bronze. PVD Polished Brass is the one to specify if the pull sees weather or heavy hand traffic, since PVD is a plated coating rather than a lacquer. Match it to the PPH3520 push plate if you are running a pull/push set.

No handing to specify. The DP2578 is a symmetrical 10 inch pull with a rosette at each end, so one part number works on either side of any opening. That is worth knowing if you are comparing it to the Emtek Art Nouveau pull, which is ordered with handing selected.

For the pull side, yes, and pairing it with the PPH3520 push plate covers the push side. But if the restroom door is the kind where people want to open it without gripping, the Trimco 1035 Ultimate Restroom Pull is purpose built for that, and the Trimco 1041 half round push plate at 8 x 16 inches gives a larger push target than a pull plate does. The DP2578 is the decorative solid brass option, not the touch free one.

Yes, the DP2578 is offered back to back, which is how you would do a double acting or full glass door where both faces get pulled. Specify the back to back option and the same finish for both faces.

Solid brass, both the material and the substrate, so the metal under the finish is brass rather than steel or zinc with a brass coat. That matters on an exterior or coastal opening, where a plated base metal is what corrodes first at the fixing points. If you need stainless instead, the ABH AB7200 pull is solid stainless steel.

The Deltana DP2578 is compatible with the PPH3520 push plate, so the pull and plate are ordered as two pieces. Trimco offers plate side alternatives: the 1001-1 heavy duty push plate at 3 by 12 inches, the 1041 half-round push plate at 8 by 16 inches, and the 1070 series classic push and pull plates at 3-1/2 by 15 inches, where the pull is integral to the plate rather than a separate rosette mounted pull.

The ABH AB3300 is a straight flat end commercial door pull with a 1.00 inch diameter, the AB3310 is an offset flat end pull for surface mount, and the AB7200 is a solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting. Those are unadorned bar pulls. The Deltana DP2578 is solid brass with a rosette and is stocked in PVD Polished Brass, Oil Rubbed Bronze, Brushed Nickel, Antique Nickel, and Polished Chrome for openings where the finish has to match surrounding trim.

The ABH AB3330 series is an offset round end pull offered with custom length options, which is the route when a fixed length does not fit the door. The Deltana DP2578 is fixed at 10 inches with a rosette, and Emtek's Baden and Brisbane door pulls are both 8 inches, so those run shorter rather than longer.

The DP2578 is a rosette mounted solid brass pull with a back to back option. Peers that specify through bolting include the Ives 8103HD, a heavy duty straight pull 1 inch round with through bolt mounting, and the ABH AB7200 solid stainless steel flat end pull at 7/8 inch diameter with through-bolt mounting. Confirm the hole pattern of the pull you choose against the door before ordering, since the rosette and the through-bolt styles land differently on the face.

Per piece. The unit of measure is each, so a door that needs pulls on both faces takes two, and a pull/push set takes one DP2578 plus one PPH3520 push plate. Count your openings accordingly before ordering a run.